Greg65 build thread - Page 23 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Alan's Classic · 07-04-2013, 09:54 PM

Quote:

Originally Posted by greg65

Very nice work Alan. I always hated the sanding phase while doing body work. I guess that's why I hang out in the parts department now.
Posted via Mobile Device

Thanks Greg!! It's not the best job in the world, but very important in the final out come

Cab is pretty much all blocked. Now fix a few areas and prime again for the last time I hope. These pics were taken earlier today before I finished blocking the cab.

Bomp · 07-05-2013, 12:04 AM

I wish I had your talent and motivation.
Like Tony the Tigar says,"You're doing Great".
Oh wait...... He says tastes great.
Great Job no matter what.........no matter how it tastes.
Posted via Mobile Device

Alan's Classic · 07-19-2013, 07:24 PM

Started patching the bottom of the passenger door. Once I cut the inner off both corners of the door was ate half way thru. I'm very happy Greg was able to get these doors from California. They are far better than anything around here. Keep in mind while they are "rust free" means the rust is just slower to show it's head in the dryer climates. They rust from the inside out. Just FYI for those that get doors from the west coast.

After cutting the inner door bottom off I wanted to hang the door to make sure the door contour matched the cab corner. I'm glad I did because it wasn't a good fit. FYI anytime you do a patch test fit before welding solid.

NOTE: I'm having troubles uploading pics right now. I will check later and see if things have changed. This explains why, they are swapping servers.

edit 7-20-13 still can't post pics

Alan's Classic · 07-20-2013, 07:56 PM

Still can't upload pics so I linked some from my FB page.

Inside corner of the door skin.

Door skin patches

I used tabs with clekos to hold position while I tacked it in place then cut the tabs off and finished welding. I also slit some of the corners so I could blend the two panels together. The repop part was a pretty good fit just some light head scratching.

Main seam welded and ground

Bomp · 07-20-2013, 09:50 PM

Some real fine work there.
Thats what I like

Posted via Mobile Device

Low Elco · 07-22-2013, 10:11 AM

Good lookin' work!

greg65 · 07-26-2013, 04:48 PM

Here is a couple pictures Alan sent me earlier in the week with the doors hung. Also picked these up a couple weeks ago.

DouglasRaymond · 07-27-2013, 01:27 AM

Good looking truck build, I am still learning which is a good sign. Top rate entertainment for another Friday night.

coulter · 07-27-2013, 02:25 AM

the progress on the cab is looking great!!! thats gonna be a smooth cab when alan gets done with it

btw i dig your nephews beetle!! looks pretty cool

Ta2Don · 07-27-2013, 10:23 AM

Looking Good!!!

greg65 · 07-28-2013, 07:03 PM

Thanks guys. I think Alan is getting the other door finished up today.
Posted via Mobile Device

Alan's Classic · 07-28-2013, 08:09 PM

Right door progress. I finished the skin patches, the inside bottom patch and the speaker hole is done. This is the first wipe. I didn't take a pic of it sanded. oops

aggie91 · 07-30-2013, 09:35 AM

We put those same mufflers on Korbin's 5.3 in his truck. They sound really good and not to loud.

greg65 · 07-30-2013, 10:10 AM

Nice. I have them on my Silverado also. I like sound during normal driving and really like the tone under acceleration.

greg65 · 08-19-2013, 08:43 AM

I had a good time talking with Alan Saturday about the progress on the cab and what is next on the list to do. This thing is looking amazing with the doors hung and the body work in right before being done. Here are a few pictures I snapped while I was there.

greg65 · 08-19-2013, 08:46 AM

One more with both doors on.

Alan's Classic · 08-19-2013, 09:01 AM

I enjoyed your visit.

. We got some good plans set in place.
Posted via Mobile Device

Ta2Don · 08-19-2013, 10:44 AM

Awesome!

likaroc13 · 08-19-2013, 10:58 AM

It's looking good Greg. I'm excited to see what the "plans" are!

greg65 · 08-19-2013, 08:03 PM

Quote:

Originally Posted by Ta2Don

Awesome!

Thanks Don
Posted via Mobile Device

greg65 · 08-19-2013, 08:08 PM

Quote:

Originally Posted by likaroc13

It's looking good Greg. I'm excited to see what the "plans" are!

Thanks. Nothing special just trying to keep the body and interior as factory stock as possible.
Posted via Mobile Device

step65 · 08-20-2013, 09:45 AM

Looks really good hope mine comes out as well as yours. Have you decided what brand of sealer you are using on rain gutter?
Posted via Mobile Device

likaroc13 · 08-20-2013, 10:33 AM

Quote:

Originally Posted by greg65

Thanks. Nothing special just trying to keep the body and interior as factory stock as possible.
Posted via Mobile Device

Cool, I like the sound of that.

greg65 · 08-20-2013, 10:46 AM

Quote:

Originally Posted by step65

Looks really good hope mine comes out as well as yours. Have you decided what brand of sealer you are using on rain gutter?
Posted via Mobile Device

Saturday Alan told me what he will be using but i'm not sure which one will be used on the roof. To much information at one time. Maybe he will chime in with the product name.

Dinos63 · 08-20-2013, 02:55 PM

man you guys are building one nice truck

07-05-2013, 12:04 AM	#552
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: Greg65 build thread I wish I had your talent and motivation. Like Tony the Tigar says,"You're doing Great". Oh wait...... He says tastes great. Great Job no matter what.........no matter how it tastes. Posted via Mobile Device

07-19-2013, 07:24 PM	#553
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: Greg65 build thread Started patching the bottom of the passenger door. Once I cut the inner off both corners of the door was ate half way thru. I'm very happy Greg was able to get these doors from California. They are far better than anything around here. Keep in mind while they are "rust free" means the rust is just slower to show it's head in the dryer climates. They rust from the inside out. Just FYI for those that get doors from the west coast. After cutting the inner door bottom off I wanted to hang the door to make sure the door contour matched the cab corner. I'm glad I did because it wasn't a good fit. FYI anytime you do a patch test fit before welding solid. NOTE: I'm having troubles uploading pics right now. I will check later and see if things have changed. This explains why, they are swapping servers. edit 7-20-13 still can't post pics __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker" Last edited by Alan's Classic; 07-20-2013 at 07:37 PM.

07-20-2013, 07:56 PM	#554
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: Greg65 build thread Still can't upload pics so I linked some from my FB page. Inside corner of the door skin. Door skin patches I used tabs with clekos to hold position while I tacked it in place then cut the tabs off and finished welding. I also slit some of the corners so I could blend the two panels together. The repop part was a pretty good fit just some light head scratching. Main seam welded and ground __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

07-20-2013, 09:50 PM	#555
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: Greg65 build thread Some real fine work there. Thats what I like Posted via Mobile Device

07-22-2013, 10:11 AM	#556
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: Greg65 build thread Good lookin' work! __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

07-26-2013, 04:48 PM	#557
greg65 Registered User Join Date: Mar 2009 Location: Daphne, Al Posts: 1,120	Re: Greg65 build thread Here is a couple pictures Alan sent me earlier in the week with the doors hung. Also picked these up a couple weeks ago. Attached Images __________________ 1965 c-10 swb 1997 c-1500 extended cab 2004 tahoe 1993 mustang gt BUILD THREAD:http://67-72chevytrucks.com/vboard/s...d.php?t=336653

07-27-2013, 01:27 AM	#558
DouglasRaymond Registered User Join Date: Jun 2013 Location: Mesa AZ Posts: 39	Re: Greg65 build thread Good looking truck build, I am still learning which is a good sign. Top rate entertainment for another Friday night.

07-27-2013, 02:25 AM	#559
coulter Registered User Join Date: Feb 2011 Location: muskogee, ok Posts: 1,091	Re: Greg65 build thread the progress on the cab is looking great!!! thats gonna be a smooth cab when alan gets done with it btw i dig your nephews beetle!! looks pretty cool __________________ bagged 66 longbed build http://67-72chevytrucks.com/vboard/s...d.php?t=449548 my favorite colors.. black, rust, and shiny!!!! instagram: @coulter918

07-27-2013, 10:23 AM	#560
Ta2Don Registered User Join Date: Apr 2012 Location: Searcy, AR Posts: 4,203	Re: Greg65 build thread Looking Good!!! __________________ DON Proverbs 27:17 US Air Force Retarded errr Retired My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920 My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266 My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD

07-28-2013, 07:03 PM	#561
greg65 Registered User Join Date: Mar 2009 Location: Daphne, Al Posts: 1,120	Re: Greg65 build thread Thanks guys. I think Alan is getting the other door finished up today. Posted via Mobile Device __________________ 1965 c-10 swb 1997 c-1500 extended cab 2004 tahoe 1993 mustang gt BUILD THREAD:http://67-72chevytrucks.com/vboard/s...d.php?t=336653

07-28-2013, 08:09 PM	#562
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: Greg65 build thread Right door progress. I finished the skin patches, the inside bottom patch and the speaker hole is done. This is the first wipe. I didn't take a pic of it sanded. oops __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

07-30-2013, 09:35 AM	#563
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: Greg65 build thread We put those same mufflers on Korbin's 5.3 in his truck. They sound really good and not to loud. __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

07-30-2013, 10:10 AM	#564
greg65 Registered User Join Date: Mar 2009 Location: Daphne, Al Posts: 1,120	Re: Greg65 build thread Nice. I have them on my Silverado also. I like sound during normal driving and really like the tone under acceleration. __________________ 1965 c-10 swb 1997 c-1500 extended cab 2004 tahoe 1993 mustang gt BUILD THREAD:http://67-72chevytrucks.com/vboard/s...d.php?t=336653

08-19-2013, 08:43 AM	#565
greg65 Registered User Join Date: Mar 2009 Location: Daphne, Al Posts: 1,120	Re: Greg65 build thread I had a good time talking with Alan Saturday about the progress on the cab and what is next on the list to do. This thing is looking amazing with the doors hung and the body work in right before being done. Here are a few pictures I snapped while I was there. Attached Images __________________ 1965 c-10 swb 1997 c-1500 extended cab 2004 tahoe 1993 mustang gt BUILD THREAD:http://67-72chevytrucks.com/vboard/s...d.php?t=336653 Last edited by greg65; 08-19-2013 at 08:50 AM.

08-19-2013, 08:46 AM	#566
greg65 Registered User Join Date: Mar 2009 Location: Daphne, Al Posts: 1,120	Re: Greg65 build thread One more with both doors on. Attached Images __________________ 1965 c-10 swb 1997 c-1500 extended cab 2004 tahoe 1993 mustang gt BUILD THREAD:http://67-72chevytrucks.com/vboard/s...d.php?t=336653



Register or Log In To remove these advertisements.

08-19-2013, 09:01 AM	#567
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: Greg65 build thread I enjoyed your visit. . We got some good plans set in place. Posted via Mobile Device __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

08-19-2013, 10:44 AM	#568
Ta2Don Registered User Join Date: Apr 2012 Location: Searcy, AR Posts: 4,203	Re: Greg65 build thread Awesome! __________________ DON Proverbs 27:17 US Air Force Retarded errr Retired My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920 My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266 My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD

08-19-2013, 10:58 AM	#569
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: Greg65 build thread It's looking good Greg. I'm excited to see what the "plans" are! __________________ _____________________________________________ Phillip My Build threads: 1966 Chevy C-10 "Black Betty" shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction) http://67-72chevytrucks.com/vboard/s...ighlight=betty 1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver) http://67-72chevytrucks.com/vboard/s...d.php?t=601142 Pics: '66 C-10 https://flic.kr/s/aHsjHWD4h9 '97 Tahoe https://flic.kr/s/aHsjGZ7wKP '93 C-1500 https://flic.kr/s/aHskxdpdnQ '88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md Previous Rides: 1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold) 1993 Chevy C-1500 short/step Retro-Rod (Sold) 1988 S-10 Blazer 2dr/2wd mild custom (Sold)

08-20-2013, 09:45 AM	#572
step65 Registered User Join Date: Aug 2013 Location: Wildomar Ca Posts: 274	Re: Greg65 build thread Looks really good hope mine comes out as well as yours. Have you decided what brand of sealer you are using on rain gutter? Posted via Mobile Device

08-20-2013, 02:55 PM	#575
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: Greg65 build thread man you guys are building one nice truck __________________ CHEVY ONLY... Nothin Else !

Register or Log In To remove these advertisements.