How about some pics of Static Dropped C-10's - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

snacks · 01-03-2012, 04:12 PM

front ece drop spindle 3'' springs 215/70/15=5.5'' drop
rear leaf sprung flip kit,1'' block,leaf removed 235/70/15= 8'' drop

bed floor over rear end raised and frame mini notched
custom made rear shock mounts upper and lower truck rides so good

shawno72 · 01-03-2012, 04:31 PM

Hey snacks do you have any pics of the mini notch and the rest of the underneath?? BTW your just about 45 minutes north of me.

snacks · 01-03-2012, 04:40 PM

Quote:

Originally Posted by shawno72

Hey snacks do you have any pics of the mini notch and the rest of the underneath?? BTW your just about 45 minutes north of me.

next time i pull the bed off ill take some pics, your truck in your avatar is sick is it bagged , one of the best looking ones iv seen

shawno72 · 01-03-2012, 04:48 PM

Quote:

Originally Posted by snacks

next time i pull the bed off ill take some pics, your truck in your avatar is sick is it bagged , one of the best looking ones iv seen

Not yet... photoshopped for motivation. Will be doing a bag set up later on this year.... if all goes well.

snacks · 01-03-2012, 05:02 PM

do you do all your own work(welding and fab) if not we can hook up i can help you out if needed

shawno72 · 01-03-2012, 05:21 PM

Quote:

Originally Posted by snacks

do you do all your own work(welding and fab) if not we can hook up i can help you out if needed

Actually I do all my own work, certified welder, used to do iron work til the economy took a dive. Now I manage the Midas Auto Service in Lodi. Still might get ahold of you for some help, thanks I appreciate that. Hey what would you charge to install a cnotch like you have?

snacks · 01-03-2012, 05:27 PM

Quote:

Originally Posted by shawno72

Actually I do all my own work, certified welder, used to do iron work til the economy took a dive. Now I manage the Midas Auto Service in Lodi. Still might get ahold of you for some help, thanks I appreciate that. Hey what would you charge to install a cnotch like you have?

cool man i help run a speedee oil change in roseville, the notch i have is one of those pre fabed cpp notches that i welded in , if you drove down here we could do it in an afternoon ,pull the bed ,cut the frame , weld it in, beer and food on you haha

shawno72 · 01-03-2012, 05:52 PM

Quote:

Originally Posted by snacks

cool man i help run a speedee oil change in roseville, the notch i have is one of those pre fabed cpp notches that i welded in , if you drove down here we could do it in an afternoon ,pull the bed ,cut the frame , weld it in, beer and food on you haha

Sounds good. I'll let you know, thanks.

cory d · 01-03-2012, 05:58 PM

flipped and 1 1/2 coils cut off

shawno72 · 01-03-2012, 06:03 PM

Welcome aboard Cory. You are on the best forum on the web!!
Posted via Mobile Device

OC 72 · 01-03-2012, 06:04 PM

The trucks on this last page sure have nice stance!

cory d · 01-03-2012, 06:05 PM

thanks, ive been a member of c10forum for a while now but this gets allot more traffic

shawno72 · 01-03-2012, 06:09 PM

Here is how mine looks today.
Name: 68 1.jpg
Views: 24858
Size: 25.4 KB

Name: 68 2.jpg
Views: 34972
Size: 41.2 KB

And here is how I want it to look by the end of the year

I still have the stock steelies and will put them back on when I bag it.
Name: 68c10whitebagged.jpg
Views: 25827
Size: 25.0 KB

Name: 68c103bagged.jpg
Views: 30249
Size: 35.0 KB

Rkansasboy · 09-30-2012, 09:46 PM

Quote:

Originally Posted by shawno72

Here is how mine looks today.
Attachment 850437
Attachment 850438

And here is how I want it to look by the end of the year

I still have the stock steelies and will put them back on when I bag it.
Attachment 850439
Attachment 850440

Hey shawno72 what drop do you have in ralley pic and your tire size. thanx

bigsmitty75 · 01-15-2012, 06:29 PM

Is there anyone out there can help me out with my dilemma. I have a '85 GMC SWB. 2WD that I'm currently restoring. I want to do a static drop on my truck. The wheels that I'm gonna run are a 24x9 with a 255/30/24 in the front and a 24x15 with a 405/25/24 in the rear. I don't want to bag my truck. Can some please help a brother out?

Slammed66 · 01-15-2012, 07:25 PM

What's the dilemma??
Posted via Mobile Device

Narxoleptic Customs · 01-15-2012, 11:46 PM

Bigsmitty75:
R u going to have room to run a 15" wide rear wheel and not narrow the frame? If u don't have to narrow the rear frame: Just do a flip rear kit (5-7" drop) and 3" spindles and 2" coils for the front.
If u do have to narrow the rear frame: it sounds like u r in over ur head, find a shop close to u and pay them to do it...
Posted via Mobile Device

bigsmitty75 · 01-17-2012, 04:20 PM

I am going to narrow my rear end in order to accommodate the 24x15 rim in the rear.

franky69c10 · 01-17-2012, 09:59 PM

Posted via Mobile Device

C10LIFE · 03-13-2012, 01:23 AM

Quote:

Originally Posted by franky69c10

Posted via Mobile Device

Love the square bodys, miss my 79.
Posted via Mobile Device

melks · 01-19-2012, 12:04 PM

nicee, some specs on the drop please lol?

gringoloco · 01-24-2012, 09:23 AM

Pretty low static- what's the drop?

C10LIFE · 02-08-2012, 07:35 PM

Great thread, I called and ordered a 4.5 and 6 drop kit this morning and then put it on hold thinking I need a 5.5 and 7 to go with my 20x8.5 255/40r20 and 20x10 295/40r20. I have looked at a lot of trucks with the same size drops and wheels but the stance looks differant. Can anyone explain this or tell me if I am going to have a problem with the setup I am planning on putting togather? Thanks
Posted via Mobile Device

droppedgmc · 02-09-2012, 02:53 AM

pics of my old 68'...i'll get her back one day

4.5"/ 7"

20x8.5"/ 20x10"
255/40/20 295/40/20

fastcam1 · 02-09-2012, 11:24 AM

Quote:

Originally Posted by droppedgmc

pics of my old 68'...i'll get her back one day

4.5"/ 7"

20x8.5"/ 20x10"
255/40/20 295/40/20

i think ive seen this one around town before, beautiful truck

01-03-2012, 04:12 PM	#1
snacks Registered User Join Date: Jan 2009 Location: rocklin california Posts: 142	Re: How about some pics of Static Dropped C-10's front ece drop spindle 3'' springs 215/70/15=5.5'' drop rear leaf sprung flip kit,1'' block,leaf removed 235/70/15= 8'' drop bed floor over rear end raised and frame mini notched custom made rear shock mounts upper and lower truck rides so good Attached Images

01-03-2012, 04:31 PM	#2
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: How about some pics of Static Dropped C-10's Hey snacks do you have any pics of the mini notch and the rest of the underneath?? BTW your just about 45 minutes north of me. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

01-03-2012, 05:02 PM	#5
snacks Registered User Join Date: Jan 2009 Location: rocklin california Posts: 142	Re: How about some pics of Static Dropped C-10's do you do all your own work(welding and fab) if not we can hook up i can help you out if needed

01-03-2012, 05:58 PM	#9
cory d Registered User Join Date: Dec 2011 Location: Arlington WA Posts: 1,728	Re: How about some pics of Static Dropped C-10's flipped and 1 1/2 coils cut off

01-03-2012, 06:03 PM	#10
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: How about some pics of Static Dropped C-10's Welcome aboard Cory. You are on the best forum on the web!! Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

01-03-2012, 06:04 PM	#11
OC 72 Registered User Join Date: Dec 2011 Location: CA Posts: 361	Re: How about some pics of Static Dropped C-10's The trucks on this last page sure have nice stance!

01-03-2012, 06:05 PM	#12
cory d Registered User Join Date: Dec 2011 Location: Arlington WA Posts: 1,728	Re: How about some pics of Static Dropped C-10's thanks, ive been a member of c10forum for a while now but this gets allot more traffic

01-03-2012, 06:09 PM	#13
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: How about some pics of Static Dropped C-10's Here is how mine looks today. And here is how I want it to look by the end of the year I still have the stock steelies and will put them back on when I bag it. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

01-15-2012, 06:29 PM	#15
bigsmitty75 Registered User Join Date: Dec 2010 Location: waco,tx Posts: 4	Re: How about some pics of Static Dropped C-10's Is there anyone out there can help me out with my dilemma. I have a '85 GMC SWB. 2WD that I'm currently restoring. I want to do a static drop on my truck. The wheels that I'm gonna run are a 24x9 with a 255/30/24 in the front and a 24x15 with a 405/25/24 in the rear. I don't want to bag my truck. Can some please help a brother out?

01-15-2012, 07:25 PM	#16
Slammed66 Needs a Big Block Join Date: Oct 2003 Location: Red Deer , Alberta Posts: 1,198	Re: How about some pics of Static Dropped C-10's What's the dilemma?? Posted via Mobile Device __________________ 1964 Short box On dropmembers and billets 1962 Suburban family cruiser 1972 K10

01-15-2012, 11:46 PM	#17
Narxoleptic Customs Registered User Join Date: Dec 2011 Location: Blytheville/Bentonville, AR Posts: 393	Re: How about some pics of Static Dropped C-10's Bigsmitty75: R u going to have room to run a 15" wide rear wheel and not narrow the frame? If u don't have to narrow the rear frame: Just do a flip rear kit (5-7" drop) and 3" spindles and 2" coils for the front. If u do have to narrow the rear frame: it sounds like u r in over ur head, find a shop close to u and pay them to do it... Posted via Mobile Device

01-17-2012, 04:20 PM	#18
bigsmitty75 Registered User Join Date: Dec 2010 Location: waco,tx Posts: 4	Re: How about some pics of Static Dropped C-10's I am going to narrow my rear end in order to accommodate the 24x15 rim in the rear.

01-17-2012, 09:59 PM	#19
franky69c10 chevy runs deep Join Date: Mar 2006 Location: PHOENIX AZ Posts: 1,074	Re: How about some pics of Static Dropped C-10's Posted via Mobile Device __________________ RAIDER NATION 1969 c10 swb soon 2 b on the road... My LWB is a SWB now http://67-72chevytrucks.com/vboard/s...d.php?t=498241

01-19-2012, 12:04 PM	#21
melks Registered User Join Date: Mar 2010 Location: Ontario Canada Posts: 151	Re: How about some pics of Static Dropped C-10's nicee, some specs on the drop please lol?

01-24-2012, 09:23 AM	#22
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: How about some pics of Static Dropped C-10's Pretty low static- what's the drop? __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy



Register or Log In To remove these advertisements.

02-08-2012, 07:35 PM	#23
C10LIFE Registered User Join Date: Jan 2012 Location: Yakima Washington Posts: 80	Re: How about some pics of Static Dropped C-10's Great thread, I called and ordered a 4.5 and 6 drop kit this morning and then put it on hold thinking I need a 5.5 and 7 to go with my 20x8.5 255/40r20 and 20x10 295/40r20. I have looked at a lot of trucks with the same size drops and wheels but the stance looks differant. Can anyone explain this or tell me if I am going to have a problem with the setup I am planning on putting togather? Thanks Posted via Mobile Device

02-09-2012, 02:53 AM	#24
droppedgmc Truck Enthusiast Join Date: Dec 2006 Location: Arlington, WA Posts: 1,346	Re: How about some pics of Static Dropped C-10's pics of my old 68'...i'll get her back one day 4.5"/ 7" 20x8.5"/ 20x10" 255/40/20 295/40/20 __________________ '85 swb

Register or Log In To remove these advertisements.