The Blue Goose

[oldblue1968chevy]

I got one piece on..lol

I got alot of clips now, but my door is out of alignment so I cant put that door trim on cause it rubs and will screw it out. I am NOT a bodyman..

[slick copper]

Have you tried just loosening the door hinge bolts, lifting up or lowering the door, and bolting it back down? I did this on one door of mine seemed to help. Of course having a buddy around to help out would've been nice.

[67chevy1series]

Originally Posted by oldblue1968chevy

I got one piece on..lol

I got alot of clips now, but my door is out of alignment so I cant put that door trim on cause it rubs and will screw it out. I am NOT a bodyman..

Originally Posted by slick copper

Have you tried just loosening the door hinge bolts, lifting up or lowering the door, and bolting it back down? I did this on one door of mine seemed to help. Of course having a buddy around to help out would've been nice.

jon heres what i would do if i was in your situtation, i would unbolt the door (but just make it loose dont take it off),get some wood shims place them all around the door and then poition it where the shims are all around making a perfect gap and then tighten it up.... but your front fender is on so its gonna be alot harder

[oldblue1968chevy]

Yeah, fender is on. I SUCK at gaps etc etc my hood is terrible...worse than doors oneday the poor truck will get all redone correctly till then ima beat on it

[slick copper]

Nah....it's not that hard! Well....maybe if you had an extra hand or two!

[67chevy1series]

Originally Posted by oldblue1968chevy

Yeah, fender is on. I SUCK at gaps etc etc my hood is terrible...worse than doors oneday the poor truck will get all redone correctly till then ima beat on it

hahah my hood suck but that because of bad hinges and the hood is rusted

Originally Posted by slick copper

Nah....it's not that hard! Well....maybe if you had an extra hand or two!

yes hes gonna need a extra hand or two!

[slick copper]

Originally Posted by 67chevy1series

hahah my hood suck but that because of bad hinges and the hood is rusted



yes hes gonna need a extra hand or two!

[67chevy1series]

haha

[oldblue1968chevy]

relay pic (not a good job..but temporary i hope, works good!)

saw this ol truck working today so i got a quickie bad picture for you guys

COOKED with no AC at the redlights this afternoon too

been workin' on old boat last few days (been sittin for years) injectors stopped up etc etc etc bout got it done. did hay before that, i shoulda got a pic of everyone piled into the bed goin down the road. Felt like a bunch of kangaroos' back there bouncing around.

[oldblue1968chevy]

oops here are the pictures.

[67chevy1series]

haha funny....kangoroos, nicw work on the wiring john











































oh ya i had my first sun drop today it is now finally in CA!!!

[oldblue1968chevy]

Haha, good im glad you tried it. Thats the local drink round' here...used to have way more caffeine

[67chevy1series]

i guess the had to change it in order to get it to sell in other states

[oldblue1968chevy]

What did you think? Its quite simialar to mtn dew. They have a cherry lemon flavor too.

[67chevy1series]

Originally Posted by oldblue1968chevy

What did you think? Its quite simialar to mtn dew. They have a cherry lemon flavor too.

it tastes like mtn dew thats sat for a little bit and went just a little flat but at the same time its still good and you fell its fresh and not flat

[oldblue1968chevy]

Any CA only drinks I oughta try?

I got a long heater cable today in the mail and my emergency flahser button i'll try to install tonite maybe (so darn hot). Goin' fishin now.

[67chevy1series]

its pourin rain!! well we have sasperilla

[oldblue1968chevy]

ive had that somewere, its not really popular, its quite hard to get..

[67chevy1series]

haha its root beer lol

[oldblue1968chevy]

Huh, never made the connection

[oldblue1968chevy]

Well i'll get to the heater control and ermegency flasher tomorow goin movies in the old blue junker tointe

[oldblue1968chevy]

Hangover 2 was pretty funny..

Got 1 end of the heater control on. I lack a screw/bolt (ugh).

Almost done with my flasher button. A pin dropped outa the turn signal switch when I was diassembling and now I dunno where it goes back. I have a thread in 67-72 trucks board hopefully someone knows!!

They are pretty small and stick out far, I can see how my original one got broken off so easily.

It took me 1 hr to figure out the steering wheel puller (forgot about the 2 bolts on the sides of the big bolt) I mis placed everything but the main body piece )

[oldblue1968chevy]

Im blue again!!

7500 post!!

[oldblue1968chevy]

Well, i think ive found my rearend ive been searching for

68shortstep (matt), has a 373 5 lug rearend. It needs shoes and the drums turned.

Im hopefully going after it tomorow afternoon and will clean it up a bit do brakes and get it on my truck. Then i will FINALLY be able to carry a spare tire, run a matching set of wheels/tires.

Rallys (stock silver or a wild arse color?)

slots (already polshed up ready to go on, 15/7)

steelies and caps/babymoons

Other suggestion that could be in the budget lol

[lolife99]

Silver ralley wheels!