![]() |
![]() |
#201 |
Senior Member
![]() Join Date: Jul 2010
Location: Dandridge, Tn. USA
Posts: 2,226
|
Re: Bolt in steering rack
You can see the upper shaft connecting to the column and top u-joint.
__________________
GoodGuys 2012 Pro-Truck Champion ![]() 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion ![]() 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion ![]() Proud to put our products up against all others! |
![]() |
![]() |
![]() |
#202 |
Senior Member
![]() Join Date: Jul 2010
Location: Dandridge, Tn. USA
Posts: 2,226
|
Re: Bolt in steering rack
Using factory G.M. lines, we plumbed the power steering hoses.
__________________
GoodGuys 2012 Pro-Truck Champion ![]() 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion ![]() 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion ![]() Proud to put our products up against all others! |
![]() |
![]() |
![]() |
#203 |
Registered User
![]() Join Date: May 2007
Location: dallas ga
Posts: 1,503
|
Re: Bolt in steering rack
Rob, any ideas for a bushing or something on the top side of the frame? Could the bearing be turned over with a spacer so that it is flush with the frame on the top? Maybe it is just me but it looks a little unfinished as it is..... not to mention a great place for trash to settle... give me your thoughts..
|
![]() |
![]() |
![]() |
#204 |
Registered User
Join Date: Jan 2010
Location: Houston Tx
Posts: 32
|
Re: Bolt in steering rack
|
![]() |
![]() |
![]() |
#205 |
Truck and auto performance nut
Join Date: Feb 2007
Location: McKinney,Texas
Posts: 3,848
|
Re: Bolt in steering rack
you're changing the tie rod end type too....so its fine.
__________________
Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken |
![]() |
![]() |
![]() |
#206 | |
Registered User
Join Date: Oct 2009
Location: Howell, MI
Posts: 403
|
Re: Bolt in steering rack
Quote:
i.e. - when you use a MII or Ford R&P and associated tierod ends - they have a different taper than our trucks do. Not saying this is a MII rack - I'm just expounding on what my research on racks learned me. ![]() |
|
![]() |
![]() |
![]() |
#207 |
67-72 parts collector,…
![]() Join Date: Nov 2002
Location: Mid-MO
Posts: 22,685
|
Re: Bolt in steering rack
great work.
__________________
Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 06-15-2011 at 10:07 AM. |
![]() |
![]() |
![]() |
#208 | |
A guy with a truck
Join Date: Sep 2005
Location: Germany, for now
Posts: 5,920
|
Re: Bolt in steering rack
Quote:
![]()
__________________
-Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy |
|
![]() |
![]() |
![]() |
#209 | |
Senior Member
![]() Join Date: Jul 2010
Location: Dandridge, Tn. USA
Posts: 2,226
|
Re: Bolt in steering rack
Quote:
__________________
GoodGuys 2012 Pro-Truck Champion ![]() 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion ![]() 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion ![]() Proud to put our products up against all others! |
|
![]() |
![]() |
![]() |
#210 |
Senior Member
![]() Join Date: Jul 2010
Location: Dandridge, Tn. USA
Posts: 2,226
|
Re: Bolt in steering rack
Easy now, were not done yet. spindle mods and tie rod ends, and alignment are the last bit to go. We will be using a High-Misalignment rod end, so there is no re-tapering of the spindle.
__________________
GoodGuys 2012 Pro-Truck Champion ![]() 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion ![]() 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion ![]() Proud to put our products up against all others! |
![]() |
![]() |
![]() |
#211 | |
Registered User
Join Date: Oct 2009
Location: Howell, MI
Posts: 403
|
Re: Bolt in steering rack
Quote:
![]() |
|
![]() |
![]() |
![]() |
#212 |
Senior Member
![]() Join Date: Jul 2010
Location: Dandridge, Tn. USA
Posts: 2,226
|
Re: Bolt in steering rack
Here's the last steps. We finally recieved the adjuster sleeves today! The hex shock is threaded with 5/8" x 18 on one side, and 14mm x 1.5 on the other. We then had them heat treated. Tie rod ends are high-mis-alignment 5/8" chromoly.
__________________
GoodGuys 2012 Pro-Truck Champion ![]() 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion ![]() 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion ![]() Proud to put our products up against all others! |
![]() |
![]() |
![]() |
#213 |
Senior Member
![]() Join Date: Jul 2010
Location: Dandridge, Tn. USA
Posts: 2,226
|
Re: Bolt in steering rack
Start by removing the spring clamps on the rack boots
__________________
GoodGuys 2012 Pro-Truck Champion ![]() 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion ![]() 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion ![]() Proud to put our products up against all others! |
![]() |
![]() |
![]() |
#214 |
Senior Member
![]() Join Date: Jul 2010
Location: Dandridge, Tn. USA
Posts: 2,226
|
Re: Bolt in steering rack
Thread the rod end into the adjuster sleeve. Leave approx 1/4" of thread showing, tighten the jam nut - TIGHT!
__________________
GoodGuys 2012 Pro-Truck Champion ![]() 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion ![]() 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion ![]() Proud to put our products up against all others! |
![]() |
![]() |
![]() |
#215 |
Senior Member
![]() Join Date: Jul 2010
Location: Dandridge, Tn. USA
Posts: 2,226
|
Re: Bolt in steering rack
** Thread the adjuster sleeve onto the inner tie-rod end. Leave approx 1" of thread showing. Leave the JAM NUT Loose
__________________
GoodGuys 2012 Pro-Truck Champion ![]() 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion ![]() 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion ![]() Proud to put our products up against all others! |
![]() |
![]() |
![]() |
#216 |
Senior Member
![]() Join Date: Jul 2010
Location: Dandridge, Tn. USA
Posts: 2,226
|
Re: Bolt in steering rack
Bolt the new tie-rod assembly to the bottom of the steering arm. The large U.S.S. washer installs on the bottom, as a saftey stop for the rod end.
__________________
GoodGuys 2012 Pro-Truck Champion ![]() 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion ![]() 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion ![]() Proud to put our products up against all others! |
![]() |
![]() |
![]() |
#217 |
Senior Member
![]() Join Date: Jul 2010
Location: Dandridge, Tn. USA
Posts: 2,226
|
Re: Bolt in steering rack
The Complete Install. Toe adjustment is made between the inner tie-rod end and the adjuster sleeve. Don't forget to put the spring clamp back on for the rack boot. For smooth cruisers, set toe at - 1/8" . For more spirited driving, try 1/8" toe out.
__________________
GoodGuys 2012 Pro-Truck Champion ![]() 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion ![]() 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion ![]() Proud to put our products up against all others! |
![]() |
![]() |
![]() |
#218 |
Registered User
Join Date: Nov 2001
Location: Concord, NC
Posts: 2,489
|
Re: Bolt in steering rack
Any way to lube those heims? There are heims with zerks. Any reason why you're not using them? Not being negative. Just asking
![]() |
![]() |
![]() |
![]() |
#219 |
Senior Member
![]() Join Date: Jul 2010
Location: Dandridge, Tn. USA
Posts: 2,226
|
Re: Bolt in steering rack
At this time we have'nt found a supplier with that item. - High mis-alignment, chromolly, with a grease zerk. if you know of any, let me know.
__________________
GoodGuys 2012 Pro-Truck Champion ![]() 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion ![]() 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion ![]() Proud to put our products up against all others! |
![]() |
![]() |
![]() |
#220 |
Registered User
Join Date: Nov 2001
Location: Concord, NC
Posts: 2,489
|
Re: Bolt in steering rack
Give me the size and I'll check it out right away.
Posted via Mobile Device |
![]() |
![]() |
![]() |
#221 |
Registered User
Join Date: Mar 2009
Location: norman okahoma
Posts: 269
|
Re: Bolt in steering rack
post #212 said 5/8
__________________
The TEAL GMC build thread is HERE 1972 GMC SWB 454 oval ports TH400 fastest 1/4 mile time so far 13.05 @ 104 If you think you have too much horsepower you obviously have a traction problem ! |
![]() |
![]() |
![]() |
#222 |
Registered User
Join Date: Nov 2001
Location: Concord, NC
Posts: 2,489
|
Re: Bolt in steering rack
I pretty much figured 5/8ths. That's what all the racks used on all the race cars we built that used r&p. I got a call in to a supplier right now. It may be the high misalignment won't allow enough material for a zerk. It would be good to be able to keep lube on that joint with all the movement there.
Posted via Mobile Device |
![]() |
![]() |
![]() |
#223 |
Senior Member
Join Date: Dec 2003
Location: Mesa,Az
Posts: 3,981
|
Re: Bolt in steering rack
Just my two cents on the greasable rod ends.... I wouldn't recommend using them due to the fact that they are MUCH weaker. The area where the rod end is drilled and tapped for the grease fitting creates a major weak spot. I have seen several rod ends fail due to this. They split and peeled right apart... wouldn't be a fun ride.
![]() A quality rod end like the ones that Rob uses are kevlar injected and will not need to be lubricated.
__________________
www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003! |
![]() |
![]() |
![]() |
#224 |
Registered User
![]() Join Date: May 2007
Location: dallas ga
Posts: 1,503
|
Re: Bolt in steering rack
Ship them out!!!!!
|
![]() |
![]() |
![]() |
#225 |
needs more $$$
Join Date: Mar 2004
Location: Sacramento
Posts: 1,936
|
Re: Bolt in steering rack
I don't know how much has changed from this production version to the one in the old Joe, but will the production version still work with a pancaked crossmember?
__________________
1970 2wd Blazer |
![]() |
![]() |
![]() |
Bookmarks |
|
|