What parts aren't out there? - Page 9 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jb4short · 03-13-2007, 05:08 AM

Quote:

Originally Posted by Stoney

Has anyone ever bought any Tri-ProAutomotive sheet metal? I am wondering about the gauge of the material is all.

A lot of the vendors here carry the parts and have for years. I don't want anyone thinking this is some new brand. The participation here is to try to find new ideas for the manufacturer and try to promote new items that will be coming to market.

There's also no magic- this development takes time once the decision is made to produce a part. That LWB bedside was already in the works as was the '67-'68 grille that I'll post pictures of later when I return to my hotel.

Performance style products aren't out of the question but restoration parts will always be where we spend the most effort. Some styling changes can be made in parts without a major investment others can't. I actually had someone at a trade show ask how much it would cost for a one-off set of LED taillights for their Torino....Thet would have been cool for them; but difficult for us to make our money back.

kw · 03-13-2007, 07:10 AM

How about a complete floor for a Blazer?

bagged91 · 03-13-2007, 03:46 PM

Quote:

Originally Posted by Tri-ProAutomotive

Ok; I flew down to the other factory this morning. Some of you may know what this is.....here it sits waiting for the inners to be run then they'll be shipped:

Something along the lines of this would work for a Burb/Panel 1/4 panel... Just an outer "skin" so to speak, with the correct wheel arch(not the LWB arch) and the gas fill, that would go from the door jamb to the tailgate jamb...

ronh72c10 · 03-13-2007, 09:09 PM

Here's one that fetches a good price on the board (when they really are 72 style) 1972 style big block motor towers. Somebody can probably get you a good pair to reproduce.

Ron

drman929 · 03-13-2007, 09:27 PM

Patch panels for the rear section where the tail lights are for a pickup.

sixty8c10 · 03-13-2007, 10:31 PM

Well I read thru this whole thread and nobody mentioned what I need for my next project. I am sure that someone else needs these as well. I have looked all over and cannot find them. 67-72 stepside step hangers.

**67 cst swb** · 03-14-2007, 02:31 AM

yeah,...
Is the rear tailight section plus about 5-6 inches forward available somewhere?

timcos · 03-14-2007, 08:48 AM

I will add my vote for a good quality (thick) steel bed for an SWB fleetside.

RustyParts · 03-14-2007, 09:56 AM

I wish they would stamp the GMC chrome grill, eyebrows and header bar from aluminum and polish it, like the Chevy grilles.

1lowdiesel · 03-14-2007, 10:42 AM

how about the rear lower section of a stepside bed.

**70STOVEBOLT** · 03-14-2007, 03:45 PM

Quote:

Originally Posted by Luis_gz06

67-70 automatic shift indicator pointer no tilt. Been looking forever and all they make is 71-72's.

I agree, they are like hen's teeth!

sevt_chevelle · 03-14-2007, 07:20 PM

Why not offer a FULL door skin for the AD trucks(47-54)? They already make a complete door, why not also offer just the outter skin?

Also a roof skin for the 67-72 trucks would solve a good amount of rust issues.

jb4short · 03-21-2007, 11:04 AM

I am still looking for a lower rear quarter section from a 6' fleetside bed. We would like to produce this part and need a sample. PM?

fun in dirt · 03-21-2007, 11:26 AM

What about a whole rear qtr panel for the 72 Blazer... (or has somebody else already said that). All I can find is a few small patch panels?

jb4short · 03-21-2007, 11:46 AM

Quote:

Originally Posted by fun in dirt

What about a whole rear qtr panel for the 72 Blazer... (or has somebody else already said that). All I can find is a few small patch panels?

A couple people have suggested it; as well as an outer skin. I need to find the production figures for the Blazer to see what potential numbers we're talking about.

badpeanut · 03-21-2007, 12:50 PM

Quote:

Originally Posted by Tri-ProAutomotive

I need to find the production figures for the Blazer to see what potential numbers we're talking about.

http://67-72chevytrucks.com/vboard/s...d.php?t=104816

Spanky_Pete · 03-21-2007, 04:03 PM

Quote:

Originally Posted by Hart_Rod

Can you check into this also:

http://67-72chevytrucks.com/vboard/s...d.php?t=231102

New products are very much appreciated, but the troubles with the doors should be addressed.

Especially since I know I'm going to need at least two, if not four in the next year or so.

jb4short · 03-21-2007, 04:12 PM

Quote:

Originally Posted by Spanky_Pete

New products are very much appreciated, but the troubles with the doors should be addressed.

Especially since I know I'm going to need at least two, if not four in the next year or so.

I went through that thread with the quality control people at the factory in Taiwan last week. I was assured they would address it but I have not heard anything specific to that issue yet.

Spanky_Pete · 03-21-2007, 04:19 PM

Quote:

Originally Posted by Tri-ProAutomotive

I went through that thread with the quality control people at the factory in Taiwan last week. I was assured they would address it but I have not heard anything specific to that issue yet.

Cool, thanks for being on top of things.

*steveshow* · 08-30-2007, 02:18 PM

I need the clips that hold the eyebrows on for my 71 GMC. I can't find these being reproduced anywhere, and all but one of mine were either rusted to pieces or broken...

jb4short · 08-30-2007, 03:35 PM

Quote:

Originally Posted by steveshow

I need the clips that hold the eyebrows on for my 71 GMC. I can't find these being reproduced anywhere, and all but one of mine were either rusted to pieces or broken...

check jandtautomotive.com in Syracuse, NY. You can download their fastener catalog from their site, AND I think they have a lot more than what's in the catalog

*Shane* · 08-30-2007, 03:49 PM

smooth cowl? status?

Stoney · 08-30-2007, 04:15 PM

Lwb Bedsides?

hyarbour · 08-30-2007, 04:49 PM

Stoney,
Brothers new catalog has LWB bedsides advertized, of course it says "coming soon"

jb4short · 08-30-2007, 04:55 PM

the LWB bedsides will be coming soon....no cowl from us real soon...another tool was developed for the replacement so we'll wait

03-13-2007, 07:10 AM	#202
kw Registered User Join Date: Jul 2000 Location: Owings, MD Posts: 119	Re: What parts aren't out there? How about a complete floor for a Blazer?

03-13-2007, 09:09 PM	#204
ronh72c10 Senior Member Join Date: Jul 2003 Location: Mount Forest, Ontario, Canada Posts: 978	Re: What parts aren't out there? Here's one that fetches a good price on the board (when they really are 72 style) 1972 style big block motor towers. Somebody can probably get you a good pair to reproduce. Ron __________________ 72 Chevy C10 (rust repaired, starting body work) 72 GMC 3/4ton 4x4 72 Chevy C20 Suburban 38 Ford Tudor Humpback Sedan (from the darkside) 67 Pontiac Parisienne 55 Studebaker Commander 2dr Hardtop (Starliner) My Youtube channel with Video Updates!

03-13-2007, 09:27 PM	#205
drman929 Registered User Join Date: Nov 2006 Location: Arkansas Posts: 232	Re: What parts aren't out there? Patch panels for the rear section where the tail lights are for a pickup.

03-13-2007, 10:31 PM	#206
sixty8c10 MY EX DRIVES A BROOM Join Date: Nov 2003 Location: Herington, KS Posts: 869	Re: What parts aren't out there? Well I read thru this whole thread and nobody mentioned what I need for my next project. I am sure that someone else needs these as well. I have looked all over and cannot find them. 67-72 stepside step hangers. __________________ They say nobody's perfect. I'm a nobody, so I must be perfect. Building Nemo -1968 C10 Long Bed FRED -1947 KB-2 International

03-14-2007, 02:31 AM	#207
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: What parts aren't out there? yeah,... Is the rear tailight section plus about 5-6 inches forward available somewhere? __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White 2002 Chevrolet 1500HD 4x4 Crew Cab 6.0L 4L80E Red

03-14-2007, 08:48 AM	#208
timcos Chief Honcho In Charge Join Date: Aug 2006 Location: Bentonville AR Posts: 970	Re: What parts aren't out there? I will add my vote for a good quality (thick) steel bed for an SWB fleetside. __________________ 1992 1500 4x4 Shortbed 1984 Ford F250 Supercab Longbed 6.9L Diesel 1972 K10 Cheyenne Super Fleetside Short Bed - 350 - A/C 1971 VW SuperBeetle 1960 Wife 1984 Son 1986 Son 1989 Son Previous Trucks 1967 C10 SWB (1980-1981) 1971 C10 LWB (1998-2004)

03-14-2007, 09:56 AM	#209
RustyParts Registered User Join Date: May 2006 Location: Wyman, Kentucky Posts: 403	Re: What parts aren't out there? I wish they would stamp the GMC chrome grill, eyebrows and header bar from aluminum and polish it, like the Chevy grilles. __________________ 1972 GMC Jimmy, 4WD, 454 CI, 350 Turbo, 4" lift, 35" tires The math teacher said my son "Bubba" could be a mathmatical genius. cause he's got 13 fingers!

03-14-2007, 10:42 AM	#210
1lowdiesel Senior Member Join Date: Oct 2006 Location: central jersey Posts: 763	Re: What parts aren't out there? how about the rear lower section of a stepside bed. __________________ 69 4wd V6 20k orig miles!! 05 ccsb 2wd Diesel 500hp bagged and soon to be stock floored. 01 rcsb chevy 2wd 6bt cummins :devil:> build xtremediesel.com

03-14-2007, 07:20 PM	#212
sevt_chevelle Lost amongst the CORN Join Date: Nov 2002 Location: Northern Iowa Posts: 1,072	Re: What parts aren't out there? Why not offer a FULL door skin for the AD trucks(47-54)? They already make a complete door, why not also offer just the outter skin? Also a roof skin for the 67-72 trucks would solve a good amount of rust issues. __________________ Currently working on How To Videos and custom metal 70 Chevelle gettin Sliced and Diced Anything But STOCK 70 Chevelle SS455 not a typo its a BUICK BABY 49 and 72 Chevy Trucks restored to original...close to it Drommer Stor....Norwegian for Dream Big http://s969.photobucket.com/albums/a...lle/?start=all https://www.flickr.com/photos/47922830@N03/ Pictures of my work and projects

03-21-2007, 11:04 AM	#213
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: What parts aren't out there? I am still looking for a lower rear quarter section from a 6' fleetside bed. We would like to produce this part and need a sample. PM?

03-21-2007, 11:26 AM	#214
fun in dirt Registered User Join Date: Jan 2007 Location: Mississippi Posts: 2,118	Re: What parts aren't out there? What about a whole rear qtr panel for the 72 Blazer... (or has somebody else already said that). All I can find is a few small patch panels? __________________ '72 C to K20 "Cannibalizer" http://67-72chevytrucks.com/vboard/s...32#post8653432 '85 K30 "Big Nassy" '06 3500 Duramax ...tow truck '06 Silverado SS...DD '06 C1500 WT...DD '07 Classic C1500 WT...DD Built & sold cause can't keep 'em all: '72 Blazer "The Bucket" http://67-72chevytrucks.com/vboard/s...d.php?t=433190 '55 Chevy straight axle gasser https://www.trifive.com/forums/showthread.php?t=173938 '69 Pro Street Chevelle http://www.chevelles.com/forums/showthread.php?t=332541 '86 M1031 CUCV http://67-72chevytrucks.com/vboard/s...d.php?t=553619

08-30-2007, 02:18 PM	#220
steveshow Account Suspended Join Date: Aug 2007 Location: Austin, Tx Posts: 81	Re: What parts aren't out there? I need the clips that hold the eyebrows on for my 71 GMC. I can't find these being reproduced anywhere, and all but one of mine were either rusted to pieces or broken...

08-30-2007, 03:49 PM	#222
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: What parts aren't out there? smooth cowl? status?

08-30-2007, 04:15 PM	#223
Stoney Farm Truck Join Date: Aug 2006 Location: Jersey Village, Texas Posts: 547	Re: What parts aren't out there? Lwb Bedsides? __________________ 1969 CST/10 1984 K5 Blazer 4x4 2016 Dodge Ram 2500 4x4 Mike Jersey Village, Tx

08-30-2007, 04:49 PM	#224
hyarbour Registered User Join Date: Jan 2007 Location: Fairview, ks Posts: 203	Re: What parts aren't out there? Stoney, Brothers new catalog has LWB bedsides advertized, of course it says "coming soon"



Register or Log In To remove these advertisements.

08-30-2007, 04:55 PM	#225
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: What parts aren't out there? the LWB bedsides will be coming soon....no cowl from us real soon...another tool was developed for the replacement so we'll wait

Register or Log In To remove these advertisements.