C10CJ: A Pro-touring '71 Stepside on a No Limit Pro-C10 Chassis

[kehstr]

Originally Posted by 1971_c10

Are you talking the copper things like in post 77? Those are Clecos and a little strip I made with 1/8" holes spaced 0.75" apart. There are corresponding 1/8" holes in the sheet metal for the Cleco to go through. Clecos come from the aircraft industry and are made to hold panels together prior to riveting. So they come in various typical rivet sizes. I have 1/8" and 3/16" ones. The 3/16" have a stronger spring for more clamp but need a bigger hole to then fill later.

Yes, that is exactly what I am talking about, do you have a picture of how you built them and how to set them up for use?