Will 15x8s fit all the way around? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cgster · 03-19-2021, 03:05 PM

Have a stock 67 c10 setup, drums, nothing changed. Will 15x8s fit the front and back with no issues? I will probably be running 275/60R15 tires all the way around as well. Thanks.

Sparky dave · 03-19-2021, 03:53 PM

Pretty much stock size wheels think you will be fine. Are you lowered?

cgster · 03-19-2021, 03:56 PM

Quote:

Originally Posted by Sparky dave

Pretty much stock size wheels think you will be fine. Are you lowered?

Not lowered yet, but do have a 2" front, 4" back lowering springs that will be going on the truck. Will that cause issue with the wheels/tires?

Sparky dave · 03-19-2021, 04:15 PM

Think you will be fine have you got the tyres already? One thing to think about if you install wide tyres on a run at the front with a high sidewall the tyre rolls on the rim in corners. I made this mistake but on a 7 inch rim on the front. Just something else to think about if you haven't already

Sparky dave · 03-19-2021, 04:20 PM

Recomended tyre sizes for 8 inch rim
Here you go mate straight from good old google

Sparky dave · 03-19-2021, 04:23 PM

Attached

jimijam00 · 03-19-2021, 04:29 PM

275/60R15 is a great size for a 15x8. I run that on the rear of my musclecar. Not sure if it will fit on the front of the C10 though.

71longbed-brew · 03-19-2021, 05:21 PM

Im running 275/60/15's up front with 50 year old sagging springs and i have zero clearance issues

Redneck Rydes · 03-19-2021, 06:04 PM

15x8 on the front with 2"lowering spindle you will have to trim the lower control arms a bit

67C10Step · 03-19-2021, 07:07 PM

15x8 all the way around with 255/70-15 tires. Four inch drop in the rear and 2-1/2” drop spindles in the front. No trimming of anything required. A slightly wider tire wouldn’t be an issue that I could see.

**'68OrangeSunshine** · 03-19-2021, 07:30 PM

I have a '67 K/10 Suburban. It had 15 x 8 rims with 33x12.50x15 tires on it. Tires were fine.
When I tried the 15 x 10 rims [and 33x12.50x15] from my [then grounded] '71 GMC Jimmy, I had turning problems with the front end. Had to switch back.

MaximusD · 03-19-2021, 08:29 PM

Mine fit just fine. 15x8 275/60 15 on all 4 corners with a 2/4 drop.

**Ol Blue K20** · 03-19-2021, 08:42 PM

Most will fit fine, but, what's the back spacing on the wheel?

cgster · 03-20-2021, 08:24 PM

Thanks for the feedback...think I will go with the 15x8s with 275/60R15 on all 4 corners.

nuke1 · 03-21-2021, 08:55 PM

Simple answer yes I did in the past. No issues. Preferred 255 in front

Chuck A · 03-22-2021, 02:07 PM

I have 15" x 8" truck rallies on my '69 GMC. Tire size is 255/70/R15 BF Goodrich Radial TAs. Stock suspension with new springs & shocks. I have no issues with clearance front or rear and lock to lock. I almost wish I had gone wider & taller because there is plenty of room.

**MikeB** · 03-22-2021, 05:15 PM

I must be the odd man out here. My 69 is around 2" lower than stock in the front. Tires are 255-70x15 on 8" rally wheels. I had an issue with the front tires barely rubbing the bolts that attach the inner fenders to the fender lips. (Mostly on fast turns with bumps in the road.) Ended up replacing the top ones with button head bolts. Problem solved. Spindles and rotors are from an 85 C10, so it's possible they stick out a little more than stock.

03-19-2021, 03:05 PM	#1
cgster Registered User Join Date: Aug 2015 Location: Texas Posts: 324	Will 15x8s fit all the way around? Have a stock 67 c10 setup, drums, nothing changed. Will 15x8s fit the front and back with no issues? I will probably be running 275/60R15 tires all the way around as well. Thanks.

03-19-2021, 03:53 PM	#2
Sparky dave Registered User Join Date: Nov 2017 Location: Leeds west yorkshire Posts: 307	Re: Will 15x8s fit all the way around? Pretty much stock size wheels think you will be fine. Are you lowered? __________________ 69 longbed 350 700r4 3.73 POSI cruiser

03-19-2021, 04:15 PM	#4
Sparky dave Registered User Join Date: Nov 2017 Location: Leeds west yorkshire Posts: 307	Re: Will 15x8s fit all the way around? Think you will be fine have you got the tyres already? One thing to think about if you install wide tyres on a run at the front with a high sidewall the tyre rolls on the rim in corners. I made this mistake but on a 7 inch rim on the front. Just something else to think about if you haven't already __________________ 69 longbed 350 700r4 3.73 POSI cruiser

03-19-2021, 04:20 PM	#5
Sparky dave Registered User Join Date: Nov 2017 Location: Leeds west yorkshire Posts: 307	Re: Will 15x8s fit all the way around? Recomended tyre sizes for 8 inch rim Here you go mate straight from good old google __________________ 69 longbed 350 700r4 3.73 POSI cruiser

03-19-2021, 04:23 PM	#6
Sparky dave Registered User Join Date: Nov 2017 Location: Leeds west yorkshire Posts: 307	Re: Will 15x8s fit all the way around? Attached Attached Images __________________ 69 longbed 350 700r4 3.73 POSI cruiser

03-19-2021, 04:29 PM	#7
jimijam00 Registered User Join Date: Apr 2009 Location: PNW Posts: 553	Re: Will 15x8s fit all the way around? 275/60R15 is a great size for a 15x8. I run that on the rear of my musclecar. Not sure if it will fit on the front of the C10 though. Last edited by jimijam00; 03-19-2021 at 05:47 PM.

03-19-2021, 05:21 PM	#8
71longbed-brew Registered User Join Date: Sep 2008 Location: Salem Oregon Posts: 63	Re: Will 15x8s fit all the way around? Im running 275/60/15's up front with 50 year old sagging springs and i have zero clearance issues __________________ 350/th350 Sportsman2 heads Performer Intake 1406 carb 3.42 Eaton Posi

03-19-2021, 06:04 PM	#9
Redneck Rydes Registered User Join Date: Feb 2016 Location: Trenton,Ontario & South Carolina Posts: 755	Re: Will 15x8s fit all the way around? 15x8 on the front with 2"lowering spindle you will have to trim the lower control arms a bit

03-19-2021, 07:07 PM	#10
67C10Step Registered User Join Date: Jul 2019 Location: Beebe, AR Posts: 2,418	Re: Will 15x8s fit all the way around? 15x8 all the way around with 255/70-15 tires. Four inch drop in the rear and 2-1/2” drop spindles in the front. No trimming of anything required. A slightly wider tire wouldn’t be an issue that I could see. Attached Images __________________ 1967 C10 1980 Jeep CJ5 2020 Toyota 4Runner 2020 Toyota CH-R 2020 Acura MDX

03-19-2021, 07:30 PM	#11
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,065	Re: Will 15x8s fit all the way around? I have a '67 K/10 Suburban. It had 15 x 8 rims with 33x12.50x15 tires on it. Tires were fine. When I tried the 15 x 10 rims [and 33x12.50x15] from my [then grounded] '71 GMC Jimmy, I had turning problems with the front end. Had to switch back. __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.

03-19-2021, 08:29 PM	#12
MaximusD Registered User Join Date: Oct 2017 Location: Billings Mt Posts: 53	Re: Will 15x8s fit all the way around? Mine fit just fine. 15x8 275/60 15 on all 4 corners with a 2/4 drop. Attached Images

03-19-2021, 08:42 PM	#13
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 15,834	Re: Will 15x8s fit all the way around? Most will fit fine, but, what's the back spacing on the wheel? __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

03-20-2021, 08:24 PM	#14
cgster Registered User Join Date: Aug 2015 Location: Texas Posts: 324	Re: Will 15x8s fit all the way around? Thanks for the feedback...think I will go with the 15x8s with 275/60R15 on all 4 corners.

03-21-2021, 08:55 PM	#15
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: Will 15x8s fit all the way around? Simple answer yes I did in the past. No issues. Preferred 255 in front __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

03-22-2021, 02:07 PM	#16
Chuck A Registered User Join Date: Aug 2018 Location: Columbus, Ohio Posts: 69	Re: Will 15x8s fit all the way around? I have 15" x 8" truck rallies on my '69 GMC. Tire size is 255/70/R15 BF Goodrich Radial TAs. Stock suspension with new springs & shocks. I have no issues with clearance front or rear and lock to lock. I almost wish I had gone wider & taller because there is plenty of room. Attached Images



Register or Log In To remove these advertisements.

03-22-2021, 05:15 PM	#17
MikeB Senior Member Join Date: Jul 2000 Location: North Texas Posts: 3,429	Re: Will 15x8s fit all the way around? I must be the odd man out here. My 69 is around 2" lower than stock in the front. Tires are 255-70x15 on 8" rally wheels. I had an issue with the front tires barely rubbing the bolts that attach the inner fenders to the fender lips. (Mostly on fast turns with bumps in the road.) Ended up replacing the top ones with button head bolts. Problem solved. Spindles and rotors are from an 85 C10, so it's possible they stick out a little more than stock. __________________ Mike 1969 C10 LWB -- owned for 34 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 23 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then! Last edited by MikeB; 03-22-2021 at 05:22 PM.

Register or Log In To remove these advertisements.