New Headers (Pic's) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LUV2XCLR8 · 02-24-2005, 03:16 AM

I finally got my butt in gear and did some work to "GQ", I'm not finished
with it because the new computer showed up the same day about two
hours after I started on the blazer, here are a few pic's, the spec's on
these are on the 67-72 message board under "parts website rant"

PIC #1 OLD HEADER INSTALLED (DRIVERS)
PIC #2 OLD HEADER REMOVED ON FLOOR
PIC #3 NEW HEADER LAYING ON MY FLOOR
PIC #4 DIFFERANCE IN LENGTH / POSITION
PIC #5 NEW HEADER INSTALLED (DRIVERS)

*pipe in pick #4 is hanging low, just a FYI

MikeS · 02-24-2005, 03:27 AM

Those look really nice! Who makes them? Part #? It looks like they may fit with a manual tranny too. The previous owner of mine had to bend one of the tubes a bit to fit them in with the clutch Z-bar. I'm going to replace them one of these days.

Mike

LUV2XCLR8 · 02-24-2005, 03:30 AM

Quote:

Originally Posted by MikeS

Those look really nice! Who makes them? Part #? It looks like they may fit with a manual tranny too. The previous owner of mine had to bend one of the tubes a bit to fit them in with the clutch Z-bar. I'm going to replace them one of these days.

Mike

Part #'s and more info on 67-72 measage board, see above discription

*post #23 is the correct info for the set I have purchased and installed

bouncytruck · 02-24-2005, 03:30 AM

Are those ceramic coated? They look sharp. What size is the rest of your exhaust tubing?

c-1072 · 02-24-2005, 03:32 AM

much better looks like they will flow nice! (hooker maybe? )

LUV2XCLR8 · 02-24-2005, 03:36 AM

Quote:

Originally Posted by c-1072

much better looks like they will flow nice! (hooker maybe? )

HEADMAN ELITES (NEW FOR 2005 - COMES W/ BALL FLANGES)

Quote:

Originally Posted by bouncytruck

Are those ceramic coated? They look sharp. What size is the rest of your exhaust tubing?

YES, THEY ARE CERAMIC COATED, PAID $274 TO MY DOOR.

I CUT ALL OF THAT OTHER DOWN AND THREW IT AWAY TODAY,
I HAVE A SET OF TURNDOWNS SO I CAN DRIVE IT TO THE SHOP,
GETTING 2.5" ALUMINIZED PIPES, STAINLESS MAGNAFLOWS, &
STAINLESS TIPS TURNED OUT IN FRONT OF THE REAR WHEELS.

**lolife99** · 02-24-2005, 03:56 AM

Nice headers! I like the "ball flanges". Just a note,...for anyone running the gasket style collector,... Back in the 80's we use to use exhaust "donuts" from a 427 big truck, exhaust manifolds. They were made of steel and wouldn't blow out like a paper gasket. Seems like they wedged in the collector perfectly. I had them on my '71 Chevelle headers, in high school.

vtblazer · 02-24-2005, 09:32 AM

Thanks for doing the homework Craig.

They look like their a great fit/finish.
Nice to find something that tucks the exhaust up and out of the way, I know I'll be getting some.

LUV2XCLR8 · 02-24-2005, 04:37 PM

Quote:

Originally Posted by vtblazer

Thanks for doing the homework Craig.

They look like their a great fit/finish.
Nice to find something that tucks the exhaust up and out of the way, I know I'll be getting some.

YUP, IT WAS REALLY HARD TO BELEIVE W/ SEEING IT WITH
MY OWN EYES, BUT THEY ARE 4.5" HIGHER THAN STANDARD
LENGTH HEADERS OF THE GROUND AND ABOUT 4.5" CLOSER
TO THE MOTOR, I SHOULD BE ABLE TO RUN THE EXHAUST
ALMOST STRAIGHT BACK INSTEAD OF PUTTING THE LARGE
BENDS TO GET THEM BACK UP & OVER THE TRANS STUFF

**jamie72** · 02-24-2005, 07:48 PM

those look great, so now when you going to get that blazer done??

Alexis · 02-24-2005, 07:57 PM

those are perdy!

LUV2XCLR8 · 02-24-2005, 09:24 PM

Quote:

Originally Posted by jamie72

those look great, so now when you going to get that blazer done??

IT WILL PICK UP SPEED THIS WEEKEND FOR SURE, SHOULD HAVE EVERYTHING
DONE, EXCEPT PAINT, BY TRUCKIN NATS IN PIGEON FORGE TN., THEN I WILL
TEAR IT BACK DOWN THIS FALL TO PAINT IT, GOTA MAKE SURE IT ALL FITS,
AND I CAN'T GO ALL SUMMER W/O DRIVING A CONVERTABLE BLAZER.

5150 · 02-25-2005, 06:41 AM

Looks good Craig, Yeah you better have her ready by May 12th.

**jamie72** · 02-25-2005, 03:10 PM

sounds like a plan, good luck!!!
jamie

LUV2XCLR8 · 02-25-2005, 06:00 PM

FINISHED, ALL THOUGH I CAN'T START IT

NEXT FEW PIC'S SHOW THE DIFFERANCE FROM BEHIND ON THE
OLD AND NEW AS FAR AS EXIT HEIGHT, PLUS 2 TIGHT SHOTS

LUV2XCLR8 · 02-25-2005, 06:02 PM

And Now With The Passenger Done, Looking Back Over The Tranny,
And The Cheesie 45 Degree Tips My Buddy Made So I Can Drive It To
His Shop, 15 Minutes Away, Without Blowing All Over My Tranny

*THE EXIT HEIGHT DIFFERANCE ON POST 15 PIC #1 AND POST 16
PIC #2 IS INCREDIBLE, 4.5 INCHES IS ALOT, SHOULD TUCK NICELY

silvertonguedevil · 02-25-2005, 06:59 PM

Man!! That things dirty!!

LUV2XCLR8 · 02-25-2005, 07:02 PM

Quote:

Originally Posted by silvertonguedevil

Man!! That things dirty!!

YEH I KNOW, GETS NASTY SITTIN IN THE GARAGE ALL THE TIME

vtblazer · 02-25-2005, 07:14 PM

Quote:

Originally Posted by LUV2XCLR8

FINISHED, ALL THOUGH I CAN'T START IT

Why not?

Open headers are the best!!

LUV2XCLR8 · 02-25-2005, 07:23 PM

Quote:

Originally Posted by vtblazer

Why not?

Open headers are the best!!

WELL, I GOT A TRANNY LINE UP AGAINST MY HEADER AND I CAN'T FIND ANY
METAL HOSE CLAMPS TO TIE THE 2 TRANNY LINES TOGETHER, 1 OF THEM'S
ATTACHED WITH A CLIP, THE OTHER ISN'T, THOUGHT I'D PULL THEM OVER
TOGETHER INSIDE THE FRAME RAIL, NOT MUCH ROOM TO WORK WITH IT.

silvertonguedevil · 02-25-2005, 07:47 PM

I was just kidding BTW

vtblazer · 02-25-2005, 07:54 PM

Quote:

Originally Posted by silvertonguedevil

I was just kidding BTW

Yeah, me too.

Nice work/great info.

LUV2XCLR8 · 02-25-2005, 11:36 PM

IT'S

BobbyK · 02-26-2005, 02:40 AM

You could use a small hose clamp to tie them together.

LUV2XCLR8 · 02-26-2005, 06:25 AM

Quote:

Originally Posted by BobbyK

You could use a small hose clamp to tie them together.

GOING TO GET ONE TODAY, COULD NOT BELEIVE I DIDN'T HAVE ANY

02-24-2005, 03:56 AM	#7
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,682	Nice headers! I like the "ball flanges". Just a note,...for anyone running the gasket style collector,... Back in the 80's we use to use exhaust "donuts" from a 427 big truck, exhaust manifolds. They were made of steel and wouldn't blow out like a paper gasket. Seems like they wedged in the collector perfectly. I had them on my '71 Chevelle headers, in high school. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

02-24-2005, 09:32 AM	#8
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Progress Thanks for doing the homework Craig. They look like their a great fit/finish. Nice to find something that tucks the exhaust up and out of the way, I know I'll be getting some.

02-24-2005, 07:48 PM	#10
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,839	those look great, so now when you going to get that blazer done?? __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com

02-25-2005, 06:41 AM	#13
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,279	Looks good Craig, Yeah you better have her ready by May 12th. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

02-25-2005, 03:10 PM	#14
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,839	sounds like a plan, good luck!!! jamie __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com

02-24-2005, 03:16 AM	#1
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	New Headers (Pic's) I finally got my butt in gear and did some work to "GQ", I'm not finished with it because the new computer showed up the same day about two hours after I started on the blazer, here are a few pic's, the spec's on these are on the 67-72 message board under "parts website rant" PIC #1 OLD HEADER INSTALLED (DRIVERS) PIC #2 OLD HEADER REMOVED ON FLOOR PIC #3 NEW HEADER LAYING ON MY FLOOR PIC #4 DIFFERANCE IN LENGTH / POSITION PIC #5 NEW HEADER INSTALLED (DRIVERS) pipe in pick #4 is hanging low, just a FYI __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T Last edited by LUV2XCLR8; 02-24-2005 at 04:00 AM.*

02-24-2005, 03:27 AM	#2
MikeS Active Member Join Date: Jun 2000 Location: Pottstown, PA Posts: 197	Those look really nice! Who makes them? Part #? It looks like they may fit with a manual tranny too. The previous owner of mine had to bend one of the tubes a bit to fit them in with the clutch Z-bar. I'm going to replace them one of these days. Mike

02-24-2005, 03:30 AM	#4
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	Are those ceramic coated? They look sharp. What size is the rest of your exhaust tubing? __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

02-24-2005, 03:32 AM	#5
c-1072 Registered User Join Date: Sep 2004 Location: rochester NY Posts: 777	headers much better looks like they will flow nice! (hooker maybe? )

02-24-2005, 07:57 PM	#11
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,879	those are perdy!

02-25-2005, 06:00 PM	#15
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	FINISHED, ALL THOUGH I CAN'T START IT NEXT FEW PIC'S SHOW THE DIFFERANCE FROM BEHIND ON THE OLD AND NEW AS FAR AS EXIT HEIGHT, PLUS 2 TIGHT SHOTS __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

02-25-2005, 06:02 PM	#16
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	And Now With The Passenger Done, Looking Back Over The Tranny, And The Cheesie 45 Degree Tips My Buddy Made So I Can Drive It To His Shop, 15 Minutes Away, Without Blowing All Over My Tranny *THE EXIT HEIGHT DIFFERANCE ON POST 15 PIC #1 AND POST 16 PIC #2 IS INCREDIBLE, 4.5 INCHES IS ALOT, SHOULD TUCK NICELY __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

02-25-2005, 06:59 PM	#17
silvertonguedevil Senior Member Join Date: May 2004 Location: Seaside, Oregon Posts: 1,789	Man!! That things dirty!! __________________ -Greg My Chevy trucks, past and present: 1962 C10 SB Fleetside 1964 C10 LB Fleetside BBW 1966 C10 SB Fleetside 1966 C10 SB Fleetside BBW 1968 C10 SB Fleetside 1971 C10 LB Fleetside 1971 C10 SB Fleetside 1972 C10 SB Fleetside Cheyenne 1972 C10 SB Fleetside Cheyenne Super 1972 C10 LB Fleetside Cheyenne Super 1974 C20 Cheyenne 1979 K5 Blazer Cheyenne 1982 K10 SB Fleetside Custom Deluxe 1982 K10 SB Fleetside Scottsdale 1986 C10 SB Fleetside Silverado 2008 Silverado 1500 4x4

02-25-2005, 07:47 PM	#21
silvertonguedevil Senior Member Join Date: May 2004 Location: Seaside, Oregon Posts: 1,789	I was just kidding BTW __________________ -Greg My Chevy trucks, past and present: 1962 C10 SB Fleetside 1964 C10 LB Fleetside BBW 1966 C10 SB Fleetside 1966 C10 SB Fleetside BBW 1968 C10 SB Fleetside 1971 C10 LB Fleetside 1971 C10 SB Fleetside 1972 C10 SB Fleetside Cheyenne 1972 C10 SB Fleetside Cheyenne Super 1972 C10 LB Fleetside Cheyenne Super 1974 C20 Cheyenne 1979 K5 Blazer Cheyenne 1982 K10 SB Fleetside Custom Deluxe 1982 K10 SB Fleetside Scottsdale 1986 C10 SB Fleetside Silverado 2008 Silverado 1500 4x4

02-25-2005, 11:36 PM	#23
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	IT'S __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T



Register or Log In To remove these advertisements.

02-26-2005, 02:40 AM	#24
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,769	You could use a small hose clamp to tie them together. __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE

Register or Log In To remove these advertisements.