Project "Nympho" - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mycool72 · 06-10-2009, 07:17 PM

A lil update on the truck, drove it around today! I've done a ton of work...I will update with pics and descriptions when I'm not in class..lol...later..also, I'm picking up my bed this weekend!

my67chevytruck · 06-10-2009, 07:31 PM

sounds like you have made some good progress. get those pics loaded when you can...

mycool72 · 06-16-2009, 08:10 AM

Ok so here's my official update....
I had a hard time finding a driveshaft to fit and didn't want to pay 300 for a new one, so I finally found one that would fit with a long tail (mine is short tail turbo 350). My neighbor gave me a long tail so I installed it...long story short...it didn't work! So I reinstalled my short tail, moved the motor back two inches(PITA-requires new holes to be drilled for mounts) and finally a match.
After that was done a played with it a little-drove it around the block and did some burnouts! This past weekend I drove to the Texoma area and picked up a bed..I did an even trade with a guy for a cab that I purchased for another build. I brought the bed home and realized that it wouldn't align very well so last night I cut the rails off the rear notch, set the bed where I wanted it to be and rewelded the rails in the correct position...needless to say it has been a handfull. The truck is making real progress though and should see some road time this summer-at least the road between me and the body shop!

mycool72 · 06-16-2009, 08:14 AM

Soon to come...I bought a york 210 off flebay and have started the bracket work for it!!! Also as you can see in the pics I have started the bodywork on the bed and cut a tunnel in the cab for the ds, I will also be revisiting areas on the rest of the truck. I also need to trim out more of the inner bedsides, I'll prob do that tonight.

my67chevytruck · 06-16-2009, 09:25 AM

nice progress.

mycool72 · 06-24-2009, 04:06 PM

Movin right along with the bodywork...also I found a couple of pics I forgot to post....

mycool72 · 06-24-2009, 04:10 PM

Started messing with the tailgate...and the LH bedside is smacked pretty good near the tail lamp area, that will take some work.

mycool72 · 06-24-2009, 04:21 PM

....the frame looks tweaked in the pic w/out the bed but I didn't have the cab mounts on at that point-all good now though. Also, I FINALLY fixed the trans leak-my garage floor is water proof for sure now!
Note: that's my 05 in the background.

nuke1 · 06-24-2009, 04:39 PM

It is lookin real tastey, i like it. that color is gorgeous, looks great on these trucks.

**kev2809** · 06-24-2009, 08:42 PM

wow, it gets that low with just a notch and mounting the bags on the trailing arms? how far from the ground is the frame?

mycool72 · 06-25-2009, 08:23 AM

Quote:

Originally Posted by kev2809

wow, it gets that low with just a notch and mounting the bags on the trailing arms? how far from the ground is the frame?

I wish it were that easy...take a closer look...the bags are mounted on the axle, the cab has a tunnel for the ds, and the crossmember is cut...I'm not sure on the height of the frame but the bedside is about 3 inches from touching and I still need to put in some 2 in blocks on the back.

my67chevytruck · 06-25-2009, 08:43 AM

looking good bro, need to check it out one day, I'm down the road in Midlothian....

mycool72 · 10-15-2009, 03:50 PM

Doin an update today...I'll post some pics when I get done with the lcas in a bit.

mycool72 · 10-16-2009, 01:33 PM

Left side is on......huge difference from before as you can see in the pics

mycool72 · 10-17-2009, 09:59 AM

I finished the right side lca last night, i'll pull it out today and upload some more pics.

**kev2809** · 10-18-2009, 08:06 PM

that lca mod made a big difference...truck looks good

04 orange · 10-22-2009, 07:45 PM

The truck looks good. Keep up the work.

mycool72 · 10-23-2009, 08:39 PM

Thanks guys.

**kev2809** · 10-23-2009, 10:58 PM

you anywhere near rosenberg?? maybe i could get you to do my lca's like that! im not sure if i want to attempt that myself

mycool72 · 10-25-2009, 12:59 PM

I don't know where rosenberg is so i guess not. I'm se of ft. worth and sw of dallas.

06-10-2009, 07:17 PM	#26
mycool72 Registered User Join Date: Aug 2008 Location: Mansfield, TX Posts: 309	Re: Project "Nympho" A lil update on the truck, drove it around today! I've done a ton of work...I will update with pics and descriptions when I'm not in class..lol...later..also, I'm picking up my bed this weekend!

06-10-2009, 07:31 PM	#27
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Project "Nympho" sounds like you have made some good progress. get those pics loaded when you can... __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

06-16-2009, 08:10 AM	#28
mycool72 Registered User Join Date: Aug 2008 Location: Mansfield, TX Posts: 309	Re: Project "Nympho" Ok so here's my official update.... I had a hard time finding a driveshaft to fit and didn't want to pay 300 for a new one, so I finally found one that would fit with a long tail (mine is short tail turbo 350). My neighbor gave me a long tail so I installed it...long story short...it didn't work! So I reinstalled my short tail, moved the motor back two inches(PITA-requires new holes to be drilled for mounts) and finally a match. After that was done a played with it a little-drove it around the block and did some burnouts! This past weekend I drove to the Texoma area and picked up a bed..I did an even trade with a guy for a cab that I purchased for another build. I brought the bed home and realized that it wouldn't align very well so last night I cut the rails off the rear notch, set the bed where I wanted it to be and rewelded the rails in the correct position...needless to say it has been a handfull. The truck is making real progress though and should see some road time this summer-at least the road between me and the body shop! Attached Images

06-16-2009, 08:14 AM	#29
mycool72 Registered User Join Date: Aug 2008 Location: Mansfield, TX Posts: 309	Re: Project "Nympho" Soon to come...I bought a york 210 off flebay and have started the bracket work for it!!! Also as you can see in the pics I have started the bodywork on the bed and cut a tunnel in the cab for the ds, I will also be revisiting areas on the rest of the truck. I also need to trim out more of the inner bedsides, I'll prob do that tonight. Attached Images Last edited by mycool72; 06-16-2009 at 08:18 AM.

06-16-2009, 09:25 AM	#30
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Project "Nympho" nice progress. __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

06-24-2009, 04:06 PM	#31
mycool72 Registered User Join Date: Aug 2008 Location: Mansfield, TX Posts: 309	Re: Project "Nympho" Movin right along with the bodywork...also I found a couple of pics I forgot to post.... Attached Images

06-24-2009, 04:10 PM	#32
mycool72 Registered User Join Date: Aug 2008 Location: Mansfield, TX Posts: 309	Re: Project "Nympho" Started messing with the tailgate...and the LH bedside is smacked pretty good near the tail lamp area, that will take some work. Attached Images

06-24-2009, 04:21 PM	#33
mycool72 Registered User Join Date: Aug 2008 Location: Mansfield, TX Posts: 309	Re: Project "Nympho" ....the frame looks tweaked in the pic w/out the bed but I didn't have the cab mounts on at that point-all good now though. Also, I FINALLY fixed the trans leak-my garage floor is water proof for sure now! Note: that's my 05 in the background.

06-24-2009, 04:39 PM	#34
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: Project "Nympho" It is lookin real tastey, i like it. that color is gorgeous, looks great on these trucks. __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

06-24-2009, 08:42 PM	#35
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,134	Re: Project "Nympho" wow, it gets that low with just a notch and mounting the bags on the trailing arms? how far from the ground is the frame? Last edited by kev2809; 06-24-2009 at 08:45 PM.

06-25-2009, 08:43 AM	#37
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Project "Nympho" looking good bro, need to check it out one day, I'm down the road in Midlothian.... __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

10-15-2009, 03:50 PM	#38
mycool72 Registered User Join Date: Aug 2008 Location: Mansfield, TX Posts: 309	Re: Project "Nympho" Doin an update today...I'll post some pics when I get done with the lcas in a bit. Last edited by mycool72; 10-15-2009 at 03:50 PM.

10-16-2009, 01:33 PM	#39
mycool72 Registered User Join Date: Aug 2008 Location: Mansfield, TX Posts: 309	Re: Project "Nympho" Left side is on......huge difference from before as you can see in the pics Last edited by mycool72; 10-16-2009 at 01:37 PM.

10-17-2009, 09:59 AM	#40
mycool72 Registered User Join Date: Aug 2008 Location: Mansfield, TX Posts: 309	Re: Project "Nympho" I finished the right side lca last night, i'll pull it out today and upload some more pics.

10-18-2009, 08:06 PM	#41
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,134	Re: Project "Nympho" that lca mod made a big difference...truck looks good __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]



Register or Log In To remove these advertisements.

10-22-2009, 07:45 PM	#42
04 orange Registered User Join Date: Sep 2006 Location: Midlothian, Tx Posts: 144	Re: Project "Nympho" The truck looks good. Keep up the work.

10-23-2009, 08:39 PM	#43
mycool72 Registered User Join Date: Aug 2008 Location: Mansfield, TX Posts: 309	Re: Project "Nympho" Thanks guys.

10-23-2009, 10:58 PM	#44
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,134	Re: Project "Nympho" you anywhere near rosenberg?? maybe i could get you to do my lca's like that! im not sure if i want to attempt that myself __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

10-25-2009, 12:59 PM	#45
mycool72 Registered User Join Date: Aug 2008 Location: Mansfield, TX Posts: 309	Re: Project "Nympho" I don't know where rosenberg is so i guess not. I'm se of ft. worth and sw of dallas.

Register or Log In To remove these advertisements.