Rims And Tires - The 1947 - Present Chevrolet & GMC Truck Message Board Network

butter · 07-05-2003, 09:50 PM

I am thinking about torq thrust II rims in 17x9.5 on the rearand 17x8 on the front (not sure what the backspacing should be on the front or the rear). What is the biggest tire I can run on the rear without scrubbing? Any help. Thanks

butter · 07-06-2003, 06:50 PM

bump

SCOTI · 07-06-2003, 07:10 PM

Sizes & b.spacing req's will vary w/body style. Is it a step-side or fleet-side?

butter · 07-06-2003, 09:40 PM

Fleet side

Low69CST · 07-07-2003, 01:21 AM

I've seen 295's on 15" rims, when you get up to 17-20's most i've heard of is 285's.

Ackattack · 07-07-2003, 01:48 PM

I have 295/50/15s on my truck now on 15x10" wheels. I measured the width of the tire and it was about 13" at it's widest point. I then measured the tires I had on my car (315/35/17 Nitto DR) and it was like 12.5 on a 17x9 rim. I think you could run that size tire on our trucks.

I was going to run this size tire, but want something with a taller sidewall than a 35 profile tire, but no one make them, so I'll be running 275/50/17s in the near future.

SCOTI · 07-07-2003, 06:38 PM

Is the truck lowered? If so, how much?

butter · 07-07-2003, 09:21 PM

2.5 drop spindles front and lowered 4inches with springs on the rear. Thanks

**raggedjim** · 07-08-2003, 09:18 AM

This has 295's 0n 15 x 10 and they will NOT tuck!

Roger

GREEN70-72 · 07-08-2003, 09:28 AM

285/50/20 20X9.5 RIM I THINK ITS 4.5 ON THE BACKSPACING BUT WOULD HAVE TO DOUBLE CHECK..............AND THEY WILL TUCK!

**raggedjim** · 07-08-2003, 09:34 AM

green70-72, What kind of wheels are those? They're nice...

Roger

GREEN70-72 · 07-08-2003, 09:40 AM

BOYD TIMELESS 5'S THANKS

butter · 07-08-2003, 07:50 PM

Thanks Green70-72 for the picture that is what I am looking for but with 17's but those 20's look good may have to reconsider. thanks again.

RED71CHEVY · 07-09-2003, 01:13 PM

i am runnig 17X8 w/4.5" B.S. on all corners with 275-55-17, 11.5" at the widest point and plenty of room and they have a good amount of sidewall.

07-05-2003, 09:50 PM	#1
butter Registered User Join Date: Jan 2000 Location: Orange Beach, Alabama Posts: 133	Rims And Tires I am thinking about torq thrust II rims in 17x9.5 on the rearand 17x8 on the front (not sure what the backspacing should be on the front or the rear). What is the biggest tire I can run on the rear without scrubbing? Any help. Thanks __________________ 71 cheyenne 402 th400 swb 71 camper special (PARTS TRUCK) 70 Stepside swb 350

07-06-2003, 06:50 PM	#2
butter Registered User Join Date: Jan 2000 Location: Orange Beach, Alabama Posts: 133	bump __________________ 71 cheyenne 402 th400 swb 71 camper special (PARTS TRUCK) 70 Stepside swb 350

07-06-2003, 07:10 PM	#3
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,915	Sizes & b.spacing req's will vary w/body style. Is it a step-side or fleet-side? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

07-06-2003, 09:40 PM	#4
butter Registered User Join Date: Jan 2000 Location: Orange Beach, Alabama Posts: 133	Fleet side __________________ 71 cheyenne 402 th400 swb 71 camper special (PARTS TRUCK) 70 Stepside swb 350

07-07-2003, 01:21 AM	#5
Low69CST Registered User Join Date: May 2000 Location: Frankfort, Kentucky, USA Posts: 2,163	I've seen 295's on 15" rims, when you get up to 17-20's most i've heard of is 285's. __________________ '69 CST Short fleetside Lowered, 400 small block, 700R4, 4 wheel disc brakes, front sway bar & rear camaro sway bar (in progress) '87 V10 4x4 Short Fleetside Quad Suspension and Dual Tanks

07-07-2003, 01:48 PM	#6
Ackattack Senior Member Join Date: Aug 2002 Location: Valley Center KS Posts: 3,525	I have 295/50/15s on my truck now on 15x10" wheels. I measured the width of the tire and it was about 13" at it's widest point. I then measured the tires I had on my car (315/35/17 Nitto DR) and it was like 12.5 on a 17x9 rim. I think you could run that size tire on our trucks. I was going to run this size tire, but want something with a taller sidewall than a 35 profile tire, but no one make them, so I'll be running 275/50/17s in the near future. __________________ Project Bruiser: 68 Pro-Touring C-10 5.3L / 4L60E Project Ironhide: 97 GMC Crew Cab 4x4 Cummins SOLD: '69 GMC 1/2T SWB TBI'd: Project No Buck Assembly Manual Index Sign up Thread!!! Factory Service Manual Index

07-07-2003, 06:38 PM	#7
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,915	Is the truck lowered? If so, how much? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

07-07-2003, 09:21 PM	#8
butter Registered User Join Date: Jan 2000 Location: Orange Beach, Alabama Posts: 133	2.5 drop spindles front and lowered 4inches with springs on the rear. Thanks __________________ 71 cheyenne 402 th400 swb 71 camper special (PARTS TRUCK) 70 Stepside swb 350

07-08-2003, 09:18 AM	#9
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,388	295's This has 295's 0n 15 x 10 and they will NOT tuck! Roger __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd Last edited by raggedjim; 10-21-2009 at 03:07 PM.

07-08-2003, 09:28 AM	#10
GREEN70-72 Registered User Join Date: Feb 2002 Location: CRESTVIEW,FL,US Posts: 355	285/50/20 20X9.5 RIM I THINK ITS 4.5 ON THE BACKSPACING BUT WOULD HAVE TO DOUBLE CHECK..............AND THEY WILL TUCK! Attached Images __________________ 70 SWB, 4/6" DROP,20X8 & 20X9.5. BOYD TIMELESS 5,93 BURB POWER SEATS, BILLET SPECIALTIES STEERING WHEELS. SOON TO BE VOTECH AND TBI POWERED. O YEA AND WAL-MART IS THE DEVIL!!!

07-08-2003, 09:34 AM	#11
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,388	green70-72, What kind of wheels are those? They're nice... Roger __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd

07-08-2003, 09:40 AM	#12
GREEN70-72 Registered User Join Date: Feb 2002 Location: CRESTVIEW,FL,US Posts: 355	BOYD TIMELESS 5'S THANKS __________________ 70 SWB, 4/6" DROP,20X8 & 20X9.5. BOYD TIMELESS 5,93 BURB POWER SEATS, BILLET SPECIALTIES STEERING WHEELS. SOON TO BE VOTECH AND TBI POWERED. O YEA AND WAL-MART IS THE DEVIL!!!

07-08-2003, 07:50 PM	#13
butter Registered User Join Date: Jan 2000 Location: Orange Beach, Alabama Posts: 133	Thanks Green70-72 for the picture that is what I am looking for but with 17's but those 20's look good may have to reconsider. thanks again. __________________ 71 cheyenne 402 th400 swb 71 camper special (PARTS TRUCK) 70 Stepside swb 350

07-09-2003, 01:13 PM	#14
RED71CHEVY Registered User Join Date: Dec 1999 Location: LEXINGTON,SC,USA Posts: 208	i am runnig 17X8 w/4.5" B.S. on all corners with 275-55-17, 11.5" at the widest point and plenty of room and they have a good amount of sidewall. Attached Images __________________ TIM '71 CUSTOM C-10 torch red ,350 roller GM crate,3.73 GEARS, REAR 4"DROP SPRING, FRONT 2.5" DROP SPINDLE-1.5"lower spring, FRONT=17x8(4.5bs) W/265-60-17, BACK=17x9.5 (5bs)W/285-60-17, Vintage Air Sure Fit AC------NEVER ENDING PROJECT!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.