How about some pics of your 4x4 - Page 20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

62 short step · 04-29-2008, 02:04 AM

Quote:

Originally Posted by special-K

Been taking alot of pictures of this one before it`s gone:

Tim, thats a nice truck!! Wish I could have bought it, would of been nice to add to my collection!!

prg machine · 04-29-2008, 05:44 AM

finaly got to drive it out of the garage and down to the end of the road...

72cheyennesuper20 · 04-29-2008, 06:37 AM

prg machine, Cool truck. We should hang out.

Blue_71 · 04-29-2008, 09:16 AM

heres a few more pics of my clunkers

Blue_71 · 04-29-2008, 09:20 AM

couple more of the k20 and one of the 79

prg machine · 04-30-2008, 06:11 AM

Quote:

Originally Posted by 72cheyennesuper20

prg machine, Cool truck. We should hang out.

Thanks for the compliment...............lotta hard work.worth it though. Picked up the project truck in Salem almost 5 years ago and drove it down here to Jacksonville and proceeded to tear into it. Getting closer, but never truly done huh?

prg machine · 04-30-2008, 06:13 AM

Hey Blue71.................I realy like the primer red truck...............I am a real softie for the red oxide stuff!! Looks good!

72 CustomCamper · 04-30-2008, 06:38 AM

Here's my old girl. She's a 1990 Silverado Blazer. 3 inch body lift and 35 inch BFG's...

Chuck

72cheyennesuper20 · 04-30-2008, 07:17 AM

Here is my 4x4 I dont know if I have posted this before, But here it is maybe again.

prg machine · 05-01-2008, 08:14 AM

one more piece accomplished

Tibbetts Racing · 05-06-2008, 06:15 AM

My 73 k 15

350. flowmasters. 4 inch lift on 35s. 4 speed w/ granny low. 3.73 gm 12 bolt posi.

nothing like pulling up to school to park next to the some guys miata.

Tibbetts Racing · 05-07-2008, 09:48 PM

Quote:

Originally Posted by tjluke36

Attachment 340187
1978 with 1970 engine th350 3.73 14 bolt
this truck is a little bit of everything.
tjluke36

nice truck. i think it might be a brother to mine.

Red_69 · 05-16-2008, 07:14 PM

Here's some recent pix of my '86.

62 short step · 05-16-2008, 08:12 PM

Nice truck!!

Red_69 · 05-17-2008, 11:27 PM

Thanks! Here's how I bought it.

To this:

**Yukon Jack** · 05-18-2008, 01:47 AM

Very awesome truck Red 69!

Red_69 · 05-18-2008, 06:53 AM

Thanks guys, that means alot!

62 short step · 05-18-2008, 06:59 AM

Damn!! Very nice!!

HerkPilot · 05-19-2008, 12:48 AM

Red what's the lift/tire size combo?

Red_69 · 05-20-2008, 04:13 PM

Just a 4" suspension lift with 33X12.5X16.5's.

prg machine · 05-27-2008, 02:09 AM

Some more progress..............that front clip has me sore from fittin' and tweakin'. 68 clip on a 69 with sidemarker delete. Called the doors good and on to the hood maybe???? Won't be too long and I'll be standing in line at the DMV!!!!!!!!!

BIG HEAD · 05-29-2008, 03:48 AM

prg machine dont get discouraged it is coming together nice. my progress is a bit slow. i have started and finished two 79' fords & a 96' chevy for other people since i started my 72' step side truck last summer. i have a lot done though. i finished assembling my axles last friday they look great.

prg machine · 06-07-2008, 10:52 PM

got all of the lights in and working..went for the bumper trial fit and found out i have the C20 brackets instead of the K-20 brackets that reach to the outside hole on the bumper and bolt back to the side of the frame. Oh well......get out the cut-off wheel and fire up the welder.!!!!

prg machine · 06-07-2008, 10:55 PM

Oh forgot to mention...................I stood the line at DMV and that's current registration on that plate....................drove it on the highway for a short run............VERY WINDY!!!!!!! Engine is very quick!. I am very pleased with the 383.

dammitmitchell · 06-08-2008, 09:10 PM

the beds lifted so i can get to the gastank lines =-)

04-29-2008, 05:44 AM	#477
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	Re: Post "Your" 4x4 pic here.......... finaly got to drive it out of the garage and down to the end of the road... Attached Images __________________ 69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:

04-29-2008, 06:37 AM	#478
72cheyennesuper20 Registered User Join Date: May 2005 Location: Portland, OR. Posts: 414	Re: Post "Your" 4x4 pic here.......... prg machine, Cool truck. We should hang out.

04-29-2008, 09:20 AM	#480
Blue_71 Bloo Join Date: Feb 2001 Location: Barren County Kentucky Posts: 6,285	Re: Post "Your" 4x4 pic here.......... couple more of the k20 and one of the 79 Attached Images

04-30-2008, 06:13 AM	#482
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	Re: Post "Your" 4x4 pic here.......... Hey Blue71.................I realy like the primer red truck...............I am a real softie for the red oxide stuff!! Looks good! __________________ 69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:

04-30-2008, 06:38 AM	#483
72 CustomCamper huh ??? Join Date: Nov 2002 Location: Fredericksburg,Va. Posts: 3,369	Re: Post "Your" 4x4 pic here.......... Here's my old girl. She's a 1990 Silverado Blazer. 3 inch body lift and 35 inch BFG's... Chuck Attached Images __________________ 90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!"

04-30-2008, 07:17 AM	#484
72cheyennesuper20 Registered User Join Date: May 2005 Location: Portland, OR. Posts: 414	Re: Post "Your" 4x4 pic here.......... Here is my 4x4 I dont know if I have posted this before, But here it is maybe again. Attached Images

05-01-2008, 08:14 AM	#485
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	Re: Post "Your" 4x4 pic here.......... one more piece accomplished Attached Images __________________ 69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:

05-06-2008, 06:15 AM	#486
Tibbetts Racing Registered User Join Date: Apr 2008 Location: Bay Area Posts: 22	Re: Post "Your" 4x4 pic here.......... My 73 k 15 350. flowmasters. 4 inch lift on 35s. 4 speed w/ granny low. 3.73 gm 12 bolt posi. nothing like pulling up to school to park next to the some guys miata. Last edited by Tibbetts Racing; 05-06-2008 at 06:16 AM.

05-16-2008, 07:14 PM	#488
Red_69 Registered User Join Date: Apr 2008 Location: IL Posts: 160	Re: Post "Your" 4x4 pic here.......... Here's some recent pix of my '86. __________________ 1986 Chevy 3/4 Ton 4X4

05-16-2008, 08:12 PM	#489
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: Post "Your" 4x4 pic here.......... Nice truck!!

05-17-2008, 11:27 PM	#490
Red_69 Registered User Join Date: Apr 2008 Location: IL Posts: 160	Re: Post "Your" 4x4 pic here.......... Thanks! Here's how I bought it. To this: __________________ 1986 Chevy 3/4 Ton 4X4

05-18-2008, 01:47 AM	#491
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Re: Post "Your" 4x4 pic here.......... Very awesome truck Red 69! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

05-18-2008, 06:53 AM	#492
Red_69 Registered User Join Date: Apr 2008 Location: IL Posts: 160	Re: Post "Your" 4x4 pic here.......... Thanks guys, that means alot! __________________ 1986 Chevy 3/4 Ton 4X4

05-18-2008, 06:59 AM	#493
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: Post "Your" 4x4 pic here.......... Damn!! Very nice!!

05-19-2008, 12:48 AM	#494
HerkPilot Registered User Join Date: Oct 2007 Location: Jacksonville, AR Posts: 5	Re: Post "Your" 4x4 pic here.......... Red what's the lift/tire size combo? __________________ 1985 K10 LWB 350 w/ Vortec Heads 700R4 Stock Suspension w/ 31's



Register or Log In To remove these advertisements.

05-20-2008, 04:13 PM	#495
Red_69 Registered User Join Date: Apr 2008 Location: IL Posts: 160	Re: Post "Your" 4x4 pic here.......... Just a 4" suspension lift with 33X12.5X16.5's. __________________ 1986 Chevy 3/4 Ton 4X4

05-27-2008, 02:09 AM	#496
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	Re: Post "Your" 4x4 pic here.......... Some more progress..............that front clip has me sore from fittin' and tweakin'. 68 clip on a 69 with sidemarker delete. Called the doors good and on to the hood maybe???? Won't be too long and I'll be standing in line at the DMV!!!!!!!!! Attached Images __________________ 69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:

05-29-2008, 03:48 AM	#497
BIG HEAD Registered User Join Date: Jan 2008 Location: lake city florida Posts: 327	Re: Post "Your" 4x4 pic here.......... prg machine dont get discouraged it is coming together nice. my progress is a bit slow. i have started and finished two 79' fords & a 96' chevy for other people since i started my 72' step side truck last summer. i have a lot done though. i finished assembling my axles last friday they look great.

06-07-2008, 10:52 PM	#498
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	Re: Post "Your" 4x4 pic here.......... got all of the lights in and working..went for the bumper trial fit and found out i have the C20 brackets instead of the K-20 brackets that reach to the outside hole on the bumper and bolt back to the side of the frame. Oh well......get out the cut-off wheel and fire up the welder.!!!! Attached Images __________________ 69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:

06-07-2008, 10:55 PM	#499
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	Re: Post "Your" 4x4 pic here.......... Oh forgot to mention...................I stood the line at DMV and that's current registration on that plate....................drove it on the highway for a short run............VERY WINDY!!!!!!! Engine is very quick!. I am very pleased with the 383. __________________ 69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:

06-08-2008, 09:10 PM	#500
dammitmitchell the pollock Join Date: May 2008 Location: abilene, texas Posts: 4,423	Re: Post "Your" 4x4 pic here.......... the beds lifted so i can get to the gastank lines =-) __________________ Jack of ALL trades, Master of none.. (but one... procrastination) Army vet 02-08 RIP El Jay! Miss you brother! http://67-72chevytrucks.com/vboard/s...d.php?t=343538 http://67-72chevytrucks.com/vboard/s...d.php?t=386042

Register or Log In To remove these advertisements.