The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board > Squarebody Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-10-2013, 10:51 AM   #101
mooseknuckles
Registered User
 
mooseknuckles's Avatar
 
Join Date: Sep 2009
Location: ottawa,canada
Posts: 4,550
Re: My new project 86 Silverado

you can get away without using a c-notch with a flip kit if you remove the bumpstop and bracket...as long as you don't haul too much you'll be o.k.
mooseknuckles is offline   Reply With Quote
Old 04-10-2013, 10:51 AM   #102
Jonboy
Slots go on anything!
 
Join Date: May 2003
Location: Richardson, TX
Posts: 5,957
Re: My new project 86 Silverado

If you are doing a flip in the rear, you absolutely need to remove the bumpstop, or it will be hitting constantly, and ride like doo doo. If you are doing a C notch, the bracket gets cut out.
Jonboy is offline   Reply With Quote
Old 04-10-2013, 10:55 AM   #103
naphtali5725
Registered User
 
naphtali5725's Avatar
 
Join Date: Mar 2012
Location: NC
Posts: 1,101
Re: My new project 86 Silverado

Quote:
Originally Posted by Jonboy View Post
If you are doing a flip in the rear, you absolutely need to remove the bumpstop, or it will be hitting constantly, and ride like doo doo. If you are doing a C notch, the bracket gets cut out.
those bolt in c-notches just seems like it would make the rear of the frame flex at that point...
__________________
My build thread...
http://67-72chevytrucks.com/vboard/s...d.php?t=515829

Disabled Veteran
82nd Airborne Division
Operations: Desert Shield, Desert Storm, and Uphold Democracy
naphtali5725 is offline   Reply With Quote
Old 04-10-2013, 01:06 PM   #104
naphtali5725
Registered User
 
naphtali5725's Avatar
 
Join Date: Mar 2012
Location: NC
Posts: 1,101
Re: My new project 86 Silverado

before i go any further, can you guys verify i have the upper CA's on the right side
Attached Images
   
__________________
My build thread...
http://67-72chevytrucks.com/vboard/s...d.php?t=515829

Disabled Veteran
82nd Airborne Division
Operations: Desert Shield, Desert Storm, and Uphold Democracy
naphtali5725 is offline   Reply With Quote
Old 04-10-2013, 02:27 PM   #105
mooseknuckles
Registered User
 
mooseknuckles's Avatar
 
Join Date: Sep 2009
Location: ottawa,canada
Posts: 4,550
Re: My new project 86 Silverado

you're good.....
mooseknuckles is offline   Reply With Quote
Old 04-10-2013, 03:25 PM   #106
naphtali5725
Registered User
 
naphtali5725's Avatar
 
Join Date: Mar 2012
Location: NC
Posts: 1,101
Re: My new project 86 Silverado

pressed in LCA ball joints, what a friggin pain in the a$$

installed Energy Suspension bushing upper/lower

that's all for today, will pick back up tomorrow...
Attached Images
 
__________________
My build thread...
http://67-72chevytrucks.com/vboard/s...d.php?t=515829

Disabled Veteran
82nd Airborne Division
Operations: Desert Shield, Desert Storm, and Uphold Democracy
naphtali5725 is offline   Reply With Quote
Old 04-10-2013, 03:27 PM   #107
naphtali5725
Registered User
 
naphtali5725's Avatar
 
Join Date: Mar 2012
Location: NC
Posts: 1,101
Re: My new project 86 Silverado

Quote:
Originally Posted by mooseknuckles View Post
you're good.....
thanks moose!
__________________
My build thread...
http://67-72chevytrucks.com/vboard/s...d.php?t=515829

Disabled Veteran
82nd Airborne Division
Operations: Desert Shield, Desert Storm, and Uphold Democracy
naphtali5725 is offline   Reply With Quote
Old 04-12-2013, 11:36 PM   #108
luifer76
Registered User
 
luifer76's Avatar
 
Join Date: Jul 2010
Location: Southern California CA
Posts: 1,088
Re: My new project 86 Silverado

looking good bro, nice job....
__________________
nOtHiNg LiKe ThE gOoD oLe ChEvYs....
luifer76 is offline   Reply With Quote
Old 04-12-2013, 11:56 PM   #109
77ChevySharkBite
Registered User
 
77ChevySharkBite's Avatar
 
Join Date: Aug 2012
Location: Houston, Texas
Posts: 2,475
Re: My new project 86 Silverado

Nice man!!!! Looking sweeter and sweeter each time!!
Posted via Mobile Device
__________________
Korwin

77 C10 Silverado Sharkbite LWB Build
67 Chevy C10 Frame Off
06 Dodge Magnum 2.7v6 aka swag wag!
2010 Honda Accord 2.4I4 DD aka Liquid Metal
77ChevySharkBite is offline   Reply With Quote
Old 04-13-2013, 07:58 AM   #110
naphtali5725
Registered User
 
naphtali5725's Avatar
 
Join Date: Mar 2012
Location: NC
Posts: 1,101
Re: My new project 86 Silverado

thanks guys, i appreciate it!
rained yesterday, hope to do some more today...
__________________
My build thread...
http://67-72chevytrucks.com/vboard/s...d.php?t=515829

Disabled Veteran
82nd Airborne Division
Operations: Desert Shield, Desert Storm, and Uphold Democracy
naphtali5725 is offline   Reply With Quote
Old 04-13-2013, 06:13 PM   #111
naphtali5725
Registered User
 
naphtali5725's Avatar
 
Join Date: Mar 2012
Location: NC
Posts: 1,101
Re: My new project 86 Silverado

flipped the cab over to work on the bottom, the PO butchered the tunnel, I assume to change to the TH400 that came with it.
I need to buy a grinder, a DA or hand sanding is not going to cut it...

will be installing LCA's tomorrow...

like I said before, I have both a 10 bolt, and a 12 bolt rear... trying to decide which one to go with since i'm waiting on the flip kit... decisions, decisions
Attached Images
  
__________________
My build thread...
http://67-72chevytrucks.com/vboard/s...d.php?t=515829

Disabled Veteran
82nd Airborne Division
Operations: Desert Shield, Desert Storm, and Uphold Democracy
naphtali5725 is offline   Reply With Quote
Old 04-13-2013, 06:49 PM   #112
77ChevySharkBite
Registered User
 
77ChevySharkBite's Avatar
 
Join Date: Aug 2012
Location: Houston, Texas
Posts: 2,475
Re: My new project 86 Silverado

What's the gears in the 10 and 12 bolt? Posi?

Looking good man, sucks the PO tore the tunnel up to only make it harder on you, but think of the positive something else you get to learn for experience
Posted via Mobile Device
__________________
Korwin

77 C10 Silverado Sharkbite LWB Build
67 Chevy C10 Frame Off
06 Dodge Magnum 2.7v6 aka swag wag!
2010 Honda Accord 2.4I4 DD aka Liquid Metal
77ChevySharkBite is offline   Reply With Quote
Old 04-13-2013, 08:29 PM   #113
naphtali5725
Registered User
 
naphtali5725's Avatar
 
Join Date: Mar 2012
Location: NC
Posts: 1,101
Re: My new project 86 Silverado

thanks

Both are 3.08's unfortunately no posi...
the patch tunnel has enough overlap so I can seal it, and bolt/screw it back down to cover the hole. never know when I may need to get at the transmission or something... but who knows, i may weld it back together we'll see when I get to that point


Quote:
Originally Posted by 77ChevySharkBite View Post
What's the gears in the 10 and 12 bolt? Posi?

Looking good man, sucks the PO tore the tunnel up to only make it harder on you, but think of the positive something else you get to learn for experience
Posted via Mobile Device
__________________
My build thread...
http://67-72chevytrucks.com/vboard/s...d.php?t=515829

Disabled Veteran
82nd Airborne Division
Operations: Desert Shield, Desert Storm, and Uphold Democracy
naphtali5725 is offline   Reply With Quote
Old 04-14-2013, 10:54 AM   #114
77ChevySharkBite
Registered User
 
77ChevySharkBite's Avatar
 
Join Date: Aug 2012
Location: Houston, Texas
Posts: 2,475
Re: My new project 86 Silverado

Well I have a 12 bolt in mine with 3.42 gears and I love it, people have asked which is better out of the 10 or 12 bolt and from what I've seen it's gone both ways. So I think it's more of person preference more than anything.
Posted via Mobile Device
__________________
Korwin

77 C10 Silverado Sharkbite LWB Build
67 Chevy C10 Frame Off
06 Dodge Magnum 2.7v6 aka swag wag!
2010 Honda Accord 2.4I4 DD aka Liquid Metal
77ChevySharkBite is offline   Reply With Quote
Old 04-14-2013, 11:07 AM   #115
naphtali5725
Registered User
 
naphtali5725's Avatar
 
Join Date: Mar 2012
Location: NC
Posts: 1,101
Re: My new project 86 Silverado

well i pulled the 12 out of the woods ...
Attached Images
 
__________________
My build thread...
http://67-72chevytrucks.com/vboard/s...d.php?t=515829

Disabled Veteran
82nd Airborne Division
Operations: Desert Shield, Desert Storm, and Uphold Democracy

Last edited by naphtali5725; 04-14-2013 at 11:22 AM.
naphtali5725 is offline   Reply With Quote
Old 04-14-2013, 11:09 AM   #116
naphtali5725
Registered User
 
naphtali5725's Avatar
 
Join Date: Mar 2012
Location: NC
Posts: 1,101
Re: My new project 86 Silverado

are there enough leaf's in these rear springs? LOL
Attached Images
  
__________________
My build thread...
http://67-72chevytrucks.com/vboard/s...d.php?t=515829

Disabled Veteran
82nd Airborne Division
Operations: Desert Shield, Desert Storm, and Uphold Democracy
naphtali5725 is offline   Reply With Quote
Old 04-14-2013, 11:13 AM   #117
77ChevySharkBite
Registered User
 
77ChevySharkBite's Avatar
 
Join Date: Aug 2012
Location: Houston, Texas
Posts: 2,475
Re: My new project 86 Silverado

More than enough lol! Supposedly from what a friends dad of mine told me is that back when our trucks were built they had a heavy duty rear end, with 8 leafs on each I think the typical leafs on a truck of our generation was 10 or 12 total but as you can tell there's 16 lol on the 12 bolt
Posted via Mobile Device
__________________
Korwin

77 C10 Silverado Sharkbite LWB Build
67 Chevy C10 Frame Off
06 Dodge Magnum 2.7v6 aka swag wag!
2010 Honda Accord 2.4I4 DD aka Liquid Metal
77ChevySharkBite is offline   Reply With Quote
Old 04-14-2013, 11:15 AM   #118
naphtali5725
Registered User
 
naphtali5725's Avatar
 
Join Date: Mar 2012
Location: NC
Posts: 1,101
Re: My new project 86 Silverado

I believe 2" drop Bell Tech's

A PM and a pre-paid shipping label and they're yours...
Attached Images
    
__________________
My build thread...
http://67-72chevytrucks.com/vboard/s...d.php?t=515829

Disabled Veteran
82nd Airborne Division
Operations: Desert Shield, Desert Storm, and Uphold Democracy
naphtali5725 is offline   Reply With Quote
Old 04-14-2013, 11:19 AM   #119
naphtali5725
Registered User
 
naphtali5725's Avatar
 
Join Date: Mar 2012
Location: NC
Posts: 1,101
Re: My new project 86 Silverado

oops... look what else I found in the woods... my 67's front and rear

I just wish it had a track-bar rear

i guess it's my next project...
Attached Images
  
__________________
My build thread...
http://67-72chevytrucks.com/vboard/s...d.php?t=515829

Disabled Veteran
82nd Airborne Division
Operations: Desert Shield, Desert Storm, and Uphold Democracy
naphtali5725 is offline   Reply With Quote
Old 04-14-2013, 08:30 PM   #120
naphtali5725
Registered User
 
naphtali5725's Avatar
 
Join Date: Mar 2012
Location: NC
Posts: 1,101
Re: My new project 86 Silverado

since i have a 10 bolt that came with my truck, and a spare 12 bolt out of a Burb, I have been doing some reading...

it appears that a truck 10 bolt has a larger pinion than a truck 12 bolt, a car 12 bolt is stronger than a truck 12 bolt. so basically a truck 10 bolt is built stronger than a truck 12 bolt...will have to keep researching to see if it is worth the swap. if the truck 12 bolt is weaker, then i'll keep my 10


anyone confirm this?
__________________
My build thread...
http://67-72chevytrucks.com/vboard/s...d.php?t=515829

Disabled Veteran
82nd Airborne Division
Operations: Desert Shield, Desert Storm, and Uphold Democracy
naphtali5725 is offline   Reply With Quote
Old 04-15-2013, 12:04 AM   #121
wileecoyote427
Registered User
 
wileecoyote427's Avatar
 
Join Date: Nov 2010
Location: cape may nj
Posts: 94
Re: My new project 86 Silverado

i like yer build droppin the 455 in there how are you gonna mount it with the 350 deisel mounts since they close or make new mounts and how radical of a motor is the 455 gonna be?
wileecoyote427 is offline   Reply With Quote
Old 04-15-2013, 07:15 AM   #122
naphtali5725
Registered User
 
naphtali5725's Avatar
 
Join Date: Mar 2012
Location: NC
Posts: 1,101
Re: My new project 86 Silverado

Quote:
Originally Posted by wileecoyote427 View Post
i like yer build droppin the 455 in there how are you gonna mount it with the 350 deisel mounts since they close or make new mounts and how radical of a motor is the 455 gonna be?
the olds 455 is an excellent motor, makes A LOT of torque at low rpm's without much work. mine will be a mild build, 10.1:1 compression, .030 over, stock heads and a pretty decent cam.

mine will make 500+ ft/lbs of torque from idle through 3000rpm. Peak HP will be around 4-4500 rpm... not too shabby, since the rebuild kit for one is only 700.00+, and the motor cost me about 300-400 i think.

will be using a TH400 tranny, that's why I am asking if a truck 10 bolt is stronger than a truck 12 bolt, i'll probably twist one in half with 500+ ft/lbs of TQ

all Olds engines are the same width between the motor mounts, it is the deck height that is different, the big block is taller...

so same motor mounts for the small block fits the big...
depending on circumstances, may need to use the two forward holes on the block to mount the motor mounts.

can use car or truck frame mounts, just have to use the motor mounts that fit the frame mounts(they have to match depth of the motor mounts etc.)... and of course will have to set the engine in, and figure out where you will need to mount the frame mount, may have to drill holes, or weld them in.

in my situation, since my truck is all apart, i'll set the engine/tranny in, and make sure i have it far enough back so my driveshaft fits, then i'll bolt in the frame mounts, and tranny crossmember and i'll be good to go.
__________________
My build thread...
http://67-72chevytrucks.com/vboard/s...d.php?t=515829

Disabled Veteran
82nd Airborne Division
Operations: Desert Shield, Desert Storm, and Uphold Democracy

Last edited by naphtali5725; 04-15-2013 at 07:21 AM.
naphtali5725 is offline   Reply With Quote
Old 04-16-2013, 10:52 PM   #123
naphtali5725
Registered User
 
naphtali5725's Avatar
 
Join Date: Mar 2012
Location: NC
Posts: 1,101
Re: My new project 86 Silverado

supposed to rain over the next several days.... so i may not have any updates until it dries out...
__________________
My build thread...
http://67-72chevytrucks.com/vboard/s...d.php?t=515829

Disabled Veteran
82nd Airborne Division
Operations: Desert Shield, Desert Storm, and Uphold Democracy
naphtali5725 is offline   Reply With Quote
Old 04-16-2013, 10:56 PM   #124
rs74
Senior Member
 
rs74's Avatar
 
Join Date: Jun 2010
Location: Illinois
Posts: 2,957
Re: My new project 86 Silverado

Yeah it is heading your way. We are on day two of the rain.
__________________
Roy
85 Short Bed Silverado- Work in progress. http://67-72chevytrucks.com/vboard/s...d.php?t=564818

1987 R10 shortie
rs74 is offline   Reply With Quote
Old 04-16-2013, 11:30 PM   #125
77ChevySharkBite
Registered User
 
77ChevySharkBite's Avatar
 
Join Date: Aug 2012
Location: Houston, Texas
Posts: 2,475
Re: My new project 86 Silverado

At least y'all's is somewhat predictable in Texas it can be 80 1 day and next day it be 60 and pouring down rain, it's safe to say Texas has it's own Eco system

Looking forward to the progress when you get it, we all have to deal with the elements one way or another.
Posted via Mobile Device
__________________
Korwin

77 C10 Silverado Sharkbite LWB Build
67 Chevy C10 Frame Off
06 Dodge Magnum 2.7v6 aka swag wag!
2010 Honda Accord 2.4I4 DD aka Liquid Metal
77ChevySharkBite is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:25 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com