late build thread...LOL - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

watahyahknow · 11-16-2010, 10:05 AM

he made the holes in the sheetmetal kikke , you probably can drill them in the mdf and then put them against the door and drill trough

kikkegek · 11-16-2010, 10:12 AM

Quote:

Originally Posted by watahyahknow

he made the holes in the sheetmetal kikke , you probably can drill them in the mdf and then put them against the door and drill trough

oke, but still I dont understand. If you want to mount something like this. You's expect mounting holes to be visible from the front. Otherwise he must have used a different mounting syste. If so, I would like to know what. Because it loks great without the mounting holes.

Hope this make my question clear.

justpball · 11-16-2010, 02:35 PM

Drill holes in the door and reach in put nuts on the back side
Posted via Mobile Device

kikkegek · 11-16-2010, 02:52 PM

Quote:

Originally Posted by justpball

Drill holes in the door and reach in put nuts on the back side
Posted via Mobile Device

owwwwwwwwwwwwww..................ok. thanks man!

kikkegek · 11-17-2010, 04:33 AM

he man! I really love your midconsole and the way it curves.

Does your 91 model also have the floor heater in the middle under the dash? if so, what did you do to it when placing/building the mid console?

justpball · 11-17-2010, 06:45 AM

yea it does, if you look close right below the steering wheel in the pic you can see a little notch that lets the heat out...it is about 6in long and 3/4 in high

kikkegek · 11-17-2010, 07:44 AM

Quote:

Originally Posted by justpball

yea it does, if you look close right below the steering wheel in the pic you can see a little notch that lets the heat out...it is about 6in long and 3/4 in high

alright! thanks man!

That was what I was planning on doing myself, if I start in this idea.

I would really like very much to build something like this, but I have the 4WD-selector in the way. But since I almost never operate this handle, I am considering building a mid-console over it, with a hatch that moves the display away, so the handle can be accessed.

Devillusion · 12-08-2010, 12:47 AM

Loving what your doing with it, giving me some crazy ideas for the crew cab/short box project. Keep up the great work. Can't believe I missed this till now...

Any idea what your WMS to WMS is front and rear on this thing? I want to compare with my 1 ton single wheel measurements to see if I can manage a 20x12 in the rear. And skinnys up front.

thanks!!!

LivNLo94 · 12-09-2010, 05:07 PM

thanks for all the info on your crewcab. i really like the stance so i ordered a djm 5/7 lowering kit, eagle alloy 225's in 20x8.5 255/35r20 and 20x10 295/30r20,
my wheels should arrive today at discount tire. what size rear tire are you runnng on your suburban?

justpball · 12-10-2010, 09:43 PM

Devillusion what is WMS? Burb has 285/30/20 all the way around...

justpball · 12-10-2010, 09:44 PM

Quote:

Originally Posted by kikkegek

alright! thanks man!

That was what I was planning on doing myself, if I start in this idea.

I would really like very much to build something like this, but I have the 4WD-selector in the way. But since I almost never operate this handle, I am considering building a mid-console over it, with a hatch that moves the display away, so the handle can be accessed.

that sounds cool, be sure and let us know and take lots of pics!!!

Devillusion · 12-10-2010, 09:57 PM

Quote:

Originally Posted by justpball

Devillusion what is WMS? Burb has 285/30/20 all the way around...

Sorry, Wheel Mating Surface to Wheel Mating surface. This is the flat surface that the back of your wheel mates to (surface of drum or rotor).

I know the two versions of the 14 bolt full floaters (3/4 and 1 tons) were either one of two options...67.5 on normal dually and single wheel versions, and 63 on the cab and chassis duallys. Just not sure what the half tons measure.

justpball · 12-10-2010, 10:00 PM

i can check for ya bro!

Devillusion · 12-10-2010, 11:28 PM

Thank you very much.....I appreciate it ALOT!

I know this will cause you some work, so I truly do appreciate it. Unless someone out there has some information to save him some labour?

Again...TY!!!

watahyahknow · 12-10-2010, 11:39 PM

Quote:

Originally Posted by Devillusion

Sorry, Wheel Mating Surface to Wheel Mating surface. This is the flat surface that the back of your wheel mates to (surface of drum or rotor).

I know the two versions of the 14 bolt full floaters (3/4 and 1 tons) were either one of two options...67.5 on normal dually and single wheel versions, and 63 on the cab and chassis duallys. Just not sure what the half tons measure.

theres a little more to that theres allso a van axle and a chassis cab axle that are slightly different if i remember correctly

the two sizes on the axelhousings themselves and two types of hubs the combinations give the 4 trackwiths

you do need to change the mounting for the backingplates of the brakes if you mix and match them

http://www.pirate4x4.com/tech/billav...ble/index.html has a LOT of info on the subject

Devillusion · 12-11-2010, 12:45 AM

I thought that too, but I had a few people "set me straight" that there was only the two, I always thought there were three as well. I thought there was one that the front tire of the dually lined up with the outer rear, one that lined up with the center of the rear duallys (mine), and one that the front lined up with the inner (typical dually with box/fenders).

Guess I should be starting a new thread...this one is starting to hijack a little to much....sorry.

Either way I would appreciate the half ton measurements...

qu1cks1lver56 · 12-11-2010, 12:46 AM

Think I passed this beast on the I-10 in Pensacola a little while ago, more like a month or so ago now, I was going west you were going east. Was it you? lol

justpball · 12-11-2010, 09:05 AM

Yea i was headed to panama city for a car show, I live just across the line in bama.

**kev2809** · 12-13-2010, 12:42 PM

man how did i miss this one! sick burban man..do you have a pn for that knuckle in your steering shaft? i have an extra crossmember that im thinking of getting chopped but i was wondering how much the knuckle was too. thanks!

justpball · 12-17-2010, 07:50 AM

I got it out of a van in the junk yard, most vans have them, and a lot of the newer trucks do to
Posted via Mobile Device

qu1cks1lver56 · 12-17-2010, 11:50 AM

Quote:

Originally Posted by justpball

Yea i was headed to panama city for a car show, I live just across the line in bama.

Cool man, I'll have to catch you next time you're out this way to check this thing out

cable666guy · 12-19-2010, 02:48 PM

Cool burb, man!! The attn to detail is first rate...the lace on the side stripe is really cool, I've seen that before and I know it's not easy...Keep it up!!

justpball · 12-31-2010, 09:23 AM

The lace is skulls...LOL
here are my new shoes!

texasfunk · 12-31-2010, 10:12 AM

Lookin good!! Love the 225's!!!! 20x10 on all four?
Posted via Mobile Device

**lolife99** · 12-31-2010, 11:55 AM

Wheels look great!
What size tires?

11-16-2010, 10:05 AM	#176
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: late build thread...LOL he made the holes in the sheetmetal kikke , you probably can drill them in the mdf and then put them against the door and drill trough __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

11-16-2010, 02:35 PM	#178
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: late build thread...LOL Drill holes in the door and reach in put nuts on the back side Posted via Mobile Device __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

11-17-2010, 04:33 AM	#180
kikkegek Registered User Join Date: Aug 2010 Location: Netherlands, The Hague Posts: 1,518	Re: late build thread...LOL he man! I really love your midconsole and the way it curves. Does your 91 model also have the floor heater in the middle under the dash? if so, what did you do to it when placing/building the mid console? __________________ My dreamride / project:1977 GMC C15 Suburban In storage: Monster - 1974 GMC Suburban 25hundred Sold : Chevrolet Suburban K20 Silverado 1986 Guide: real HID projectors for 4x6 headlights link: DIY LED TAILLIGHTS

11-17-2010, 06:45 AM	#181
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: late build thread...LOL yea it does, if you look close right below the steering wheel in the pic you can see a little notch that lets the heat out...it is about 6in long and 3/4 in high __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

12-08-2010, 12:47 AM	#183
Devillusion Registered User Join Date: Jan 2010 Location: Brandon, Manitoba, Canada Posts: 782	Re: late build thread...LOL Loving what your doing with it, giving me some crazy ideas for the crew cab/short box project. Keep up the great work. Can't believe I missed this till now... Any idea what your WMS to WMS is front and rear on this thing? I want to compare with my 1 ton single wheel measurements to see if I can manage a 20x12 in the rear. And skinnys up front. thanks!!!

12-09-2010, 05:07 PM	#184
LivNLo94 Registered User Join Date: Jun 2010 Location: Odessa TX Posts: 83	Re: late build thread...LOL thanks for all the info on your crewcab. i really like the stance so i ordered a djm 5/7 lowering kit, eagle alloy 225's in 20x8.5 255/35r20 and 20x10 295/30r20, my wheels should arrive today at discount tire. what size rear tire are you runnng on your suburban?

12-10-2010, 09:43 PM	#185
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: late build thread...LOL Devillusion what is WMS? Burb has 285/30/20 all the way around... __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

12-10-2010, 10:00 PM	#188
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: late build thread...LOL i can check for ya bro! __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

12-10-2010, 11:28 PM	#189
Devillusion Registered User Join Date: Jan 2010 Location: Brandon, Manitoba, Canada Posts: 782	Re: late build thread...LOL Thank you very much.....I appreciate it ALOT! I know this will cause you some work, so I truly do appreciate it. Unless someone out there has some information to save him some labour? Again...TY!!! __________________ 1967 K30 4x4/12v Cummins/getrag/D60/D70/355s 1967 GMC suburban 4x4/LS swap 5.3/4500/205/10 bolt/14 bolt full floater 1963 C10 reg cab long box 1970 Chevelle 1968 Biscayne 2dr post "...there is no excuse for what I am about to do, but dangit....it's gonna be fun!"

12-11-2010, 12:45 AM	#191
Devillusion Registered User Join Date: Jan 2010 Location: Brandon, Manitoba, Canada Posts: 782	Re: late build thread...LOL I thought that too, but I had a few people "set me straight" that there was only the two, I always thought there were three as well. I thought there was one that the front tire of the dually lined up with the outer rear, one that lined up with the center of the rear duallys (mine), and one that the front lined up with the inner (typical dually with box/fenders). Guess I should be starting a new thread...this one is starting to hijack a little to much....sorry. Either way I would appreciate the half ton measurements... __________________ 1967 K30 4x4/12v Cummins/getrag/D60/D70/355s 1967 GMC suburban 4x4/LS swap 5.3/4500/205/10 bolt/14 bolt full floater 1963 C10 reg cab long box 1970 Chevelle 1968 Biscayne 2dr post "...there is no excuse for what I am about to do, but dangit....it's gonna be fun!"

12-11-2010, 12:46 AM	#192
qu1cks1lver56 Registered User Join Date: Dec 2009 Location: Milton, FL Posts: 733	Re: late build thread...LOL Think I passed this beast on the I-10 in Pensacola a little while ago, more like a month or so ago now, I was going west you were going east. Was it you? lol __________________ My 86 http://67-72chevytrucks.com/vboard/s...d.php?t=375526

12-11-2010, 09:05 AM	#193
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: late build thread...LOL Yea i was headed to panama city for a car show, I live just across the line in bama. __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

12-13-2010, 12:42 PM	#194
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,133	Re: late build thread...LOL man how did i miss this one! sick burban man..do you have a pn for that knuckle in your steering shaft? i have an extra crossmember that im thinking of getting chopped but i was wondering how much the knuckle was too. thanks! __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

12-17-2010, 07:50 AM	#195
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: late build thread...LOL I got it out of a van in the junk yard, most vans have them, and a lot of the newer trucks do to Posted via Mobile Device __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

12-19-2010, 02:48 PM	#197
cable666guy Registered User Join Date: Sep 2008 Location: Willow Grove, PA Posts: 299	Re: late build thread...LOL Cool burb, man!! The attn to detail is first rate...the lace on the side stripe is really cool, I've seen that before and I know it's not easy...Keep it up!!



Register or Log In To remove these advertisements.

12-31-2010, 09:23 AM	#198
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: late build thread...LOL The lace is skulls...LOL here are my new shoes! __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

12-31-2010, 10:12 AM	#199
texasfunk Registered User Join Date: Jun 2009 Location: Lubbock, TX Posts: 1,671	Re: late build thread...LOL Lookin good!! Love the 225's!!!! 20x10 on all four? Posted via Mobile Device __________________ 2006 GMC Sierra CCSB, 6.0 swap 2000 Chevy C3500 Crew Cab shortbed dually 1999 Chevy c2500 Crew Cab shortbed 1982 El Camino 350/350 1979 K5 2wd blazer bagged/bodied 1986 Monte Carlo SS 1991 Chevy CK SWB-67 clip and tailgate, bagged 350/700r4 1955 Chevy Bel Air 2014 Chevy Silverado ccsb

12-31-2010, 11:55 AM	#200
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,682	Re: late build thread...LOL Wheels look great! What size tires? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

Register or Log In To remove these advertisements.