The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-21-2012, 03:44 PM   #26
LockDoc
The Original Thread Killer

 
LockDoc's Avatar
 
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 19,478
Re: Am I SOL? Where to buy one of these?

-
I will mail the one I have out in the morning. You should have it in a day or two. If you get more than one just pass it on...

LockDoc
__________________
Leon

Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles
LockDoc is offline   Reply With Quote
Old 10-21-2012, 11:15 PM   #27
Secret Squirrel
Registered User
 
Secret Squirrel's Avatar
 
Join Date: Mar 2010
Location: Cheyenne Wy
Posts: 208
Re: Am I SOL? Where to buy one of these?

I finally got the Anchor Pin broke loose. What a chore, I had to snap off the wheel cylinder and cut the bracket on top to get the penetrating oil into the anchor pin threads. It took a lot of heat 10 hours of oil soaking + 1 1/8 wrench + one BFH + dremel tool + chisel and about 10 hours of bad language but I did it.


As you can see from the picture the pin was destroyed in the process. The next time someone says "this 42 year old vehicle has 91,000 original miles" I'll have a different perspective on what that means!


Just think I potentially have three more to do ... are hobbies suppost to be fun?
Attached Images
 
__________________
________________________
72 Olds Cutlass w/442 option
69 C-10 Short Bed Fleet
1960 Biscayne Wagon/El Camino
1995 YJ 4.0 SOA SYE on 35s
01 Excursion Limited 7.3 PSD
06 Suzuki DRZ 400S
Secret Squirrel is offline   Reply With Quote
Old 10-21-2012, 11:31 PM   #28
Secret Squirrel
Registered User
 
Secret Squirrel's Avatar
 
Join Date: Mar 2010
Location: Cheyenne Wy
Posts: 208
Re: Am I SOL? Where to buy one of these?

Here is a pcture, just in case someone years down the road runs into the same problem
Attached Images
 
__________________
________________________
72 Olds Cutlass w/442 option
69 C-10 Short Bed Fleet
1960 Biscayne Wagon/El Camino
1995 YJ 4.0 SOA SYE on 35s
01 Excursion Limited 7.3 PSD
06 Suzuki DRZ 400S
Secret Squirrel is offline   Reply With Quote
Old 10-21-2012, 11:44 PM   #29
Secret Squirrel
Registered User
 
Secret Squirrel's Avatar
 
Join Date: Mar 2010
Location: Cheyenne Wy
Posts: 208
Re: Am I SOL? Where to buy one of these?

Quote:
Originally Posted by SS Tim View Post
Group 5.055 PIN, Brake Shoe Anchor
Looks like 3841719 or 3840699 are the part numbers depending on HD brakes or not. The applications might help someone shake a used one loose. One number runs from 60-72 for the HD and the other 64-71.
Thanks for the info! Edwards CA, I miss the Desert! From 13 until I joined the service I lived in Hesperia/Victorville area. I tried searching the net with the name supplied on your document. Still no luck, good thing you all helped me out! At least I know what it is called now.
__________________
________________________
72 Olds Cutlass w/442 option
69 C-10 Short Bed Fleet
1960 Biscayne Wagon/El Camino
1995 YJ 4.0 SOA SYE on 35s
01 Excursion Limited 7.3 PSD
06 Suzuki DRZ 400S
Secret Squirrel is offline   Reply With Quote
Old 10-26-2012, 04:43 PM   #30
SS Tim
Registered User
 
SS Tim's Avatar
 
Join Date: Aug 2010
Location: Edwards, CA
Posts: 7,505
Re: Am I SOL? Where to buy one of these?

Any progress? Driving yet? If you still don't have the correct pin, go through the applications and make a list for possible source vehicles at the local pick and pull.
SS Tim is offline   Reply With Quote
Old 10-26-2012, 04:52 PM   #31
GRX
Registered User
 
GRX's Avatar
 
Join Date: Jul 2010
Location: MD
Posts: 1,935
Thumbs up

This thread just epitomized what makes this forum great. Kudos to all.
GRX is offline   Reply With Quote
Old 10-26-2012, 04:55 PM   #32
Secret Squirrel
Registered User
 
Secret Squirrel's Avatar
 
Join Date: Mar 2010
Location: Cheyenne Wy
Posts: 208
Re: Am I SOL? Where to buy one of these?

Just got it back together a few minutes ago, LocDoc saved the day.

I looked at all the junkyards around here with no luck.

Thank you all for the help, I would have been SOL without your generosity.
__________________
________________________
72 Olds Cutlass w/442 option
69 C-10 Short Bed Fleet
1960 Biscayne Wagon/El Camino
1995 YJ 4.0 SOA SYE on 35s
01 Excursion Limited 7.3 PSD
06 Suzuki DRZ 400S
Secret Squirrel is offline   Reply With Quote
Old 02-28-2014, 11:33 PM   #33
BurgerMan
Registered User
 
Join Date: Dec 2013
Location: West Lafayette, IN
Posts: 49
Re: Am I SOL? Where to buy one of these?

Bringing up an old thread here. I am in the same boat, cept I got mine off easier, just tore up the threads. Anyone still got one laying around for the rear? Thanks!
__________________
1977 Chevy K20
1959 Chevy Apache 3200
BurgerMan is offline   Reply With Quote
Old 03-01-2014, 12:07 AM   #34
ClemsonChevy
8 vehicles only 4 that run
 
ClemsonChevy's Avatar
 
Join Date: Feb 2006
Location: Clemson, SC
Posts: 236
Re: Am I SOL? Where to buy one of these?

Quote:
Originally Posted by BurgerMan View Post
Bringing up an old thread here. I am in the same boat, cept I got mine off easier, just tore up the threads. Anyone still got one laying around for the rear? Thanks!
Year and type of truck, and rear axle type will be helpful to get you the correct part.
__________________
95 2500 350 w/ 3.73
72 GMC 1500 SWB stepside
65 Chevy C10 SWB stepside
72 Chevy C10 LWB fleetside
ClemsonChevy is offline   Reply With Quote
Old 03-01-2014, 12:51 AM   #35
BurgerMan
Registered User
 
Join Date: Dec 2013
Location: West Lafayette, IN
Posts: 49
Re: Am I SOL? Where to buy one of these?

Quote:
Originally Posted by ClemsonChevy View Post
Year and type of truck, and rear axle type will be helpful to get you the correct part.
My bad. Google pointed me to 67-72 board and I previously posted on the 47-59 board with no results. My bad for not looking!

It's a 59 3200 half ton, with the original H033 axle. I believe the axle was used from 55-62 in all half ton trucks. I'm just having a hell of a time finding the part. Thanks in advance!
__________________
1977 Chevy K20
1959 Chevy Apache 3200
BurgerMan is offline   Reply With Quote
Old 03-01-2014, 10:06 AM   #36
DGulliver
Registered User
 
DGulliver's Avatar
 
Join Date: Jul 2009
Location: Southern TN
Posts: 227
Re: Am I SOL? Where to buy one of these?

This forum rocks! Way to go everyone!
__________________
'72 Chevrolet Step Side 350/TH350, '63 C10 Step V8
'74 Trans Am 400, '80 Trans Am Indy Pace Car
Mercedes AMG S55, SLK230 Kompressor, GL450
'96 Dodge Indy Ram Official Indy Truck
'99 Porsche 911 Carrera
DGulliver is offline   Reply With Quote
Old 03-01-2014, 11:37 AM   #37
michael bustamante
Senior Member
 
michael bustamante's Avatar
 
Join Date: Sep 2007
Location: Albuquerque NM
Posts: 7,044
Re: Am I SOL? Where to buy one of these?

I go to new orleans on my honeymoon may 3rd pm me before then and ill meet you and give you a new assy. I just convrerted to disc brakes. Future wifes damily is from monroe so well be driving thru
__________________
1967custom
michael bustamante is offline   Reply With Quote
Old 03-02-2014, 01:42 AM   #38
BurgerMan
Registered User
 
Join Date: Dec 2013
Location: West Lafayette, IN
Posts: 49
Re: Am I SOL? Where to buy one of these?

Quote:
Originally Posted by michael bustamante View Post
I go to new orleans on my honeymoon may 3rd pm me before then and ill meet you and give you a new assy. I just convrerted to disc brakes. Future wifes damily is from monroe so well be driving thru
Must be one hell of a drive from New Mexico to Indiana and back down to Louisiana. Lol. I think you might have seen gotten my location mixed up with Lafayette, la. You'd be surprised how often that happens at my restaurant. People from Louisiana call for delivery and don't even realize the area code is different.

Anyways, I'd be more than happy to PayPal ya for shipping/the part if it is the right one?
__________________
1977 Chevy K20
1959 Chevy Apache 3200
BurgerMan is offline   Reply With Quote
Old 09-02-2014, 06:34 PM   #39
Jeff_Fall_City
Registered User
 
Join Date: Oct 2013
Location: Fall City, WA
Posts: 4
Re: Am I SOL? Where to buy one of these?

Hello Men. I made a similar mistake - my backing plates ended up in my scrap pile... I found some replacement plates, but I too need two Rear Drum Anchor Bolts. If any of you know where I can buy a couple I would greatly appreciate any leads. I'm located near Seattle. This is my first post of many to come! I recently got my frame back from powder coating. She's been in the family since '78, and was my high school truck. Everything has been going smoothly until I trashed the backing plates. I owe a lot to this forum and hope to contribute more than take someday.
Jeff_Fall_City is offline   Reply With Quote
Old 12-14-2016, 03:44 PM   #40
ABCNiceville
Registered User
 
Join Date: Dec 2016
Location: Niceville, FL
Posts: 3
Re: Am I SOL? Where to buy one of these?

I see this thread started in 2012, and now in 2016 this is probably even more unlikely to receive a positive outcome. However, I am trying to find a brake spring anchor pin for a 1966 Chevy C10 with a 5.3L engine. The picture LockDoc posted (I have reposted below) shows exactly what I need to get this truck back on the road. Does anybody have one or know where I could find one? They appear to be as rare as hen's teeth and a couple of hours of scouring the internet has given me this forum as the most likely place to hope for a positive answer. I've already spent weeks working with my favorite local parts store, other local parts stores, and various specialty junkyards to no avail. Hoping you folks might have the answer I'm looking for. Thanks!
Attached Images
 
ABCNiceville is offline   Reply With Quote
Old 12-14-2016, 08:40 PM   #41
Secret Squirrel
Registered User
 
Secret Squirrel's Avatar
 
Join Date: Mar 2010
Location: Cheyenne Wy
Posts: 208
Re: Am I SOL? Where to buy one of these?

I'll check to see if I have another. Give me a couple days.
__________________
________________________
72 Olds Cutlass w/442 option
69 C-10 Short Bed Fleet
1960 Biscayne Wagon/El Camino
1995 YJ 4.0 SOA SYE on 35s
01 Excursion Limited 7.3 PSD
06 Suzuki DRZ 400S
Secret Squirrel is offline   Reply With Quote
Old 12-14-2016, 08:50 PM   #42
LockDoc
The Original Thread Killer

 
LockDoc's Avatar
 
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 19,478
Re: Am I SOL? Where to buy one of these?

-
I don't have any more of them. The salvage yard that was close to me closed last spring so I'm pretty much out of luck for extra parts.....

LockDoc
__________________
Leon

Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles
LockDoc is offline   Reply With Quote
Old 12-15-2016, 02:23 PM   #43
ABCNiceville
Registered User
 
Join Date: Dec 2016
Location: Niceville, FL
Posts: 3
Re: Am I SOL? Where to buy one of these?

Hello Secret Squirrel and LockDoc,

I might, may, perhaps, possibly have a lead on an anchor pin. Thanks to LockDoc for the photo. I sent it to the source to verify sizing and it looks like it may be the one. We should be getting it to know for sure Monday. If it doesn't pan out, I would still like to avail myself of your assistance. If it works, though, I thank you for your willingness to help.
ABCNiceville is offline   Reply With Quote
Old 02-01-2017, 12:10 AM   #44
Secret Squirrel
Registered User
 
Secret Squirrel's Avatar
 
Join Date: Mar 2010
Location: Cheyenne Wy
Posts: 208
Re: Am I SOL? Where to buy one of these?

Did it work out? Sorry, totally spaced looking for the part. Let me know
__________________
________________________
72 Olds Cutlass w/442 option
69 C-10 Short Bed Fleet
1960 Biscayne Wagon/El Camino
1995 YJ 4.0 SOA SYE on 35s
01 Excursion Limited 7.3 PSD
06 Suzuki DRZ 400S
Secret Squirrel is offline   Reply With Quote
Old 02-01-2017, 01:29 AM   #45
Jeff_Fall_City
Registered User
 
Join Date: Oct 2013
Location: Fall City, WA
Posts: 4
Re: Am I SOL? Where to buy one of these?

ABCNiceville - My post was from 2014. I ended up using the pin from my front drums. I converted the front to disc, and luckily I didn't throw out the parts. Do you still need one? I can check my scrap pile...
__________________
1965 C10 Long Bed
Jeff_Fall_City is offline   Reply With Quote
Old 02-01-2017, 01:25 PM   #46
ABCNiceville
Registered User
 
Join Date: Dec 2016
Location: Niceville, FL
Posts: 3
Re: Am I SOL? Where to buy one of these?

Hello Secret Squirrel and Jeff_Fall_City!

I appreciate your replies to my inquiry. Ultimately, our customer ended up doing a disc brake conversion. I do thank you for trying to help.

Jenn
ABCNiceville is offline   Reply With Quote
Old 02-03-2017, 06:57 PM   #47
hotrodlemans
Registered User
 
Join Date: Feb 2017
Location: Stone Moutain,Georgia
Posts: 1
Re: Am I SOL? Where to buy one of these?

I have the problem I was able to get the old anchor bolt out but the threads are now shot, I cannot find one at any junkyard around me. If anyone has one for the front drum brakes I would really appreciate it I have had this truck sitting for more than 8 months now and that's the last pice I need to rebuild the brakes to be able to move the truck.
hotrodlemans is offline   Reply With Quote
Old 11-24-2018, 09:13 PM   #48
jcwren
Active Member
 
Join Date: Nov 2018
Location: Flowery Branch, GA
Posts: 116
Re: Am I SOL? Where to buy one of these?

Anyone know where to find the lock washers that go between the wheel cylinder and the anchor pin?
jcwren is offline   Reply With Quote
Old 11-24-2018, 10:39 PM   #49
jocko
Senior Member
 
jocko's Avatar
 
Join Date: Oct 2009
Location: Burleson, TX
Posts: 15,949
Re: Am I SOL? Where to buy one of these?

not sure if this is the right size, but it's a source (I think it's for cars, and it's a front, but it may be a common part with a 1/2 ton truck, who knows. Link includes measurements, so could at least compare it to a broken one if one needs it. I realize this post started 6 years ago, but folks keep coming back to it!

https://www.ebay.com/itm/1963-1970-C...4383.l4275.c10

jcwren, sorry, no idea on the lock washer, I'd post a WTB ad on the parts board.
jocko is offline   Reply With Quote
Old 11-24-2018, 10:44 PM   #50
LockDoc
The Original Thread Killer

 
LockDoc's Avatar
 
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 19,478
Re: Am I SOL? Where to buy one of these?

Quote:
Originally Posted by jcwren View Post
Anyone know where to find the lock washers that go between the wheel cylinder and the anchor pin?

You can make one out of a piece of sheet metal. Drill or cut the hole in it first, before cutting the outside diameter. Make sure you have it clamped down good if you are going to try and drill it (clamp it onto a board of some kind for a backer). It doesn't have to be pretty, just functional....

LockDoc
__________________
Leon

Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles
LockDoc is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:37 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com