CA Parting 77 Scottsdale 1/2 ton 4x4 - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dale440rt · 01-29-2012, 10:28 PM

How much for the trailer brake controller that is mounted under the dash on the left hand side?

ECU PIRATE · 01-30-2012, 02:07 PM

Quote:

Originally Posted by KrazyRay

Here's the fork spring. I'm still trying to find a flywheel cover. $7 shipped for the spring.
Thanks,
Ray

Thanks Ray. That sounds more than fair. Let's see if we can do a package deal if you can find the inspection cover.

Mike

KrazyRay · 01-30-2012, 05:40 PM

Mike, I found the inspection cover. It was buried under some fenders. $5 plus shipping on it. I'm happy to do a package deal. We're looking at a medium box for the cover and spring for $21 shipped. There is a lot of room in that box to add more without additional shipping cost.
Thanks,
Ray

ECU PIRATE · 01-30-2012, 07:25 PM

Sounds real good Ray. Would you happen to still have the bolts to attach it to the bell housing? I guess I need to think of some more stuff to fill up the box...........I still have your address of the last package. Just in case, I will PM you tomorrow for you address. I could use the bell housing to engine block bolts if you can find them..

Quote:

Originally Posted by KrazyRay

Mike, I found the inspection cover. It was buried under some fenders. $5 plus shipping on it. I'm happy to do a package deal. We're looking at a medium box for the cover and spring for $21 shipped. There is a lot of room in that box to add more without additional shipping cost.
Thanks,
Ray

Posted via Mobile Device

JRANGER · 01-30-2012, 07:59 PM

Passenger side front fender any good? Fit my 78 GMC?

KrazyRay · 01-30-2012, 08:03 PM

It will be around $100 shipped via greyhound. I will get some pics.
Thanks,
Ray

JRANGER · 01-30-2012, 08:05 PM

Quote:

Originally Posted by KrazyRay

It will be around $100 shipped via greyhound. I will get some pics.
Thanks,
Ray

That about the fender?

KrazyRay · 01-30-2012, 08:10 PM

Are you asking about the inner?

KrazyRay · 01-30-2012, 08:13 PM

Quote:

Originally Posted by Dale440rt

How much for the trailer brake controller that is mounted under the dash on the left hand side?

I can do $15 shipped and I will coil up the hydraulic line to fit in a small flat rate box.
Thanks,
Ray

JRANGER · 01-30-2012, 08:14 PM

Quote:

Originally Posted by KrazyRay

Are you asking about the inner?

No you already told me about the inner fender on the other truck which i ill prob hit you up friday about since I think i have my truck working again..Im talking about the real fender lol

KrazyRay · 01-30-2012, 08:23 PM

The outer fender will cost at least $65 to ship greyhound and I was hoping to get around $35 before shipping.

JRANGER · 01-30-2012, 08:26 PM

Sounds good! The fenders on the chevy are the same as GMC right? I have a 78 GMC C15 High Sierra...Either way Ill hit you up Friday and see what you have and what I can afford to get off you...Cant wait for those hinges as is haha

KrazyRay · 01-30-2012, 08:43 PM

pics

KrazyRay · 01-30-2012, 08:51 PM

more

JRANGER · 01-30-2012, 09:08 PM

nice...Cant wait for those Hinges to get here...hehe Fender looks good....

81C10LS3 · 01-31-2012, 10:44 AM

radiator core support pic/price/shipping to 70460

KrazyRay · 01-31-2012, 11:21 AM

Sorry. The core support is sold to madcow.
Thanks,
Ray

Dale440rt · 01-31-2012, 01:30 PM

Quote:

Originally Posted by KrazyRay

I can do $15 shipped and I will coil up the hydraulic line to fit in a small flat rate box.
Thanks,
Ray

I will take it......PM sent!

KrazyRay · 02-01-2012, 02:45 PM

pics for madcow

madcow75 · 02-01-2012, 06:15 PM

Payment sent Thanks. Dustin

78K20 · 02-03-2012, 12:28 AM

If the passenger fender deal don't happin', I'll take it.

KrazyRay · 02-03-2012, 12:47 AM

It doesn't look like JRANGER wants it. This fender is solid, but it does need some body work as seen in pics and there is damage where the po welded a battery tray. see pic^
pm sent
Thanks,
Ray

JRANGER · 02-03-2012, 12:52 AM

Quote:

Originally Posted by KrazyRay

It doesn't look like JRANGER wants it. This fender is solid, but it does need some body work as seen in pics and there is damage where the po welded a battery tray. see pic^
pm sent
Thanks,
Ray

Yeah, i cant...Dont have the money...

Do you still have the inner fenders?

X Baldwin Motion · 02-03-2012, 07:11 AM

any chance those tow hooks are bolted in factory location?

pics?

thanks

KrazyRay · 02-03-2012, 12:17 PM

I still have inners.
Those are NOT factory hooks.

Thanks,
Ray

01-29-2012, 10:28 PM	#51
Dale440rt Active Member Join Date: Oct 2006 Location: Chicago Posts: 48	Re: Parting 77 Scottsdale 1/2 ton 4x4 How much for the trailer brake controller that is mounted under the dash on the left hand side? __________________

01-30-2012, 05:40 PM	#53
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 77 Scottsdale 1/2 ton 4x4 Mike, I found the inspection cover. It was buried under some fenders. $5 plus shipping on it. I'm happy to do a package deal. We're looking at a medium box for the cover and spring for $21 shipped. There is a lot of room in that box to add more without additional shipping cost. Thanks, Ray

01-30-2012, 07:59 PM	#55
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: Parting 77 Scottsdale 1/2 ton 4x4 Passenger side front fender any good? Fit my 78 GMC? __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

01-30-2012, 08:03 PM	#56
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 77 Scottsdale 1/2 ton 4x4 It will be around $100 shipped via greyhound. I will get some pics. Thanks, Ray

01-30-2012, 08:10 PM	#58
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 77 Scottsdale 1/2 ton 4x4 Are you asking about the inner?

01-30-2012, 08:23 PM	#61
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 77 Scottsdale 1/2 ton 4x4 The outer fender will cost at least $65 to ship greyhound and I was hoping to get around $35 before shipping.

01-30-2012, 08:26 PM	#62
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: Parting 77 Scottsdale 1/2 ton 4x4 Sounds good! The fenders on the chevy are the same as GMC right? I have a 78 GMC C15 High Sierra...Either way Ill hit you up Friday and see what you have and what I can afford to get off you...Cant wait for those hinges as is haha __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

01-30-2012, 08:43 PM	#63
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 77 Scottsdale 1/2 ton 4x4 pics Attached Images

01-30-2012, 08:51 PM	#64
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 77 Scottsdale 1/2 ton 4x4 more Attached Images

01-30-2012, 09:08 PM	#65
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: Parting 77 Scottsdale 1/2 ton 4x4 nice...Cant wait for those Hinges to get here...hehe Fender looks good.... __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

01-31-2012, 10:44 AM	#66
81C10LS3 Registered User Join Date: Jun 2010 Location: Slidell, La Posts: 38	Re: Parting 77 Scottsdale 1/2 ton 4x4 radiator core support pic/price/shipping to 70460 __________________ 81 C10 LS3/6L80 - frame off - in progress

01-31-2012, 11:21 AM	#67
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 77 Scottsdale 1/2 ton 4x4 Sorry. The core support is sold to madcow. Thanks, Ray

02-01-2012, 02:45 PM	#69
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 77 Scottsdale 1/2 ton 4x4 pics for madcow Attached Images

02-01-2012, 06:15 PM	#70
madcow75 Registered User Join Date: Jun 2009 Location: Fort Erie , Ontario Posts: 525	Re: Parting 77 Scottsdale 1/2 ton 4x4 Payment sent Thanks. Dustin

02-03-2012, 12:28 AM	#71
78K20 Registered User Join Date: Apr 2005 Location: LaPorte, Indiana Posts: 109	Re: Parting 77 Scottsdale 1/2 ton 4x4 If the passenger fender deal don't happin', I'll take it. __________________ 78K20 350 / 400TH 3:73's, Dual Polly tanks, my old plow Trk. Now parting out. 84K20 6.2 "J" Code Diesel / 700R / 4:10's 78K20 454/400TH 3:73's Dual tanks (my new plow rig)



Register or Log In To remove these advertisements.

02-03-2012, 12:47 AM	#72
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 77 Scottsdale 1/2 ton 4x4 It doesn't look like JRANGER wants it. This fender is solid, but it does need some body work as seen in pics and there is damage where the po welded a battery tray. see pic^ pm sent Thanks, Ray

02-03-2012, 07:11 AM	#74
X Baldwin Motion Registered User Join Date: Oct 2010 Location: Sag Harbor NY Posts: 103	Re: Parting 77 Scottsdale 1/2 ton 4x4 any chance those tow hooks are bolted in factory location? pics? thanks __________________ 1985 Custom Deluxe long bed 305 3 on tree 2015 Silverado "Great White"1987 K20 dump and plow 1968 K20 327 long bed 4spd big blue 68K20 SuburPan 4spd 79C30 L96 6L90e 86 K10 plow

02-03-2012, 12:17 PM	#75
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 77 Scottsdale 1/2 ton 4x4 I still have inners. Those are NOT factory hooks. Thanks, Ray

Register or Log In To remove these advertisements.