Spring Bushings 1968 GMC 9/10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

freeride4011 · 08-30-2009, 02:33 PM

Guys can anyone tell me where I can get a complete set of new bushings for my springs?
I ordered a set from Energy ----- but when they showed up they where for 2.5" wide springs (American) apparently my truck is Canadian version 3" wide springs and Energy does not make bushing for the 3" Canadian version.

You think they would have asked that - Can or American when I ordered.

But I guess that is just me.

Chevy1TonFun · 08-30-2009, 07:49 PM

Try Early Classic Enterprises.

Big-Blue · 08-30-2009, 10:14 PM

I could very well be wrong on this...but I think that 67-68 rear springs were 3" and 69-72 were 2 1/2. I don't believe that Canada had much to do with it. I am sure that someone will weigh in with a 67 or 68 though.

In any case, LMC has 67-68 ones for around $20...each I believe...ouch!

You can probably order poly ones from any lift company such as Skyjacker but seems like they are a bit stiff. Just what I have heard, no personal experience with them.

Good luck.

msgross · 08-30-2009, 10:56 PM

call Energy and tell them what you need. They will send the right setup... I had to convince them that my 68 had the HD setup on the front and they sent what I needed for free.

08-30-2009, 02:33 PM	#1
freeride4011 Registered User Join Date: Apr 2008 Location: Alberta, Canada Posts: 21	Spring Bushings 1968 GMC 9/10 Guys can anyone tell me where I can get a complete set of new bushings for my springs? I ordered a set from Energy ----- but when they showed up they where for 2.5" wide springs (American) apparently my truck is Canadian version 3" wide springs and Energy does not make bushing for the 3" Canadian version. You think they would have asked that - Can or American when I ordered. But I guess that is just me.

08-30-2009, 07:49 PM	#2
Chevy1TonFun Grease Monkey Join Date: Oct 2007 Location: Fresno CA Posts: 750	Re: Spring Bushings 1968 GMC 9/10 Try Early Classic Enterprises. __________________ Tow Rig: 2012 Chevy 2500HD CCSB LTZ Z71 4x4 Duramax Ultimate Offroad Build: 1978 Chevy Silverado K30 Crewcab Build Link http://67-72chevytrucks.com/vboard/s...d.php?t=654053 Mud Truck: 1972 Chevy Cheyenne K30 4x4, 468/400/205, D60/D70HD, 18" Custom Lift, 17x39" IROKs FOR SALE http://67-72chevytrucks.com/vboard/c...ton-4x4&cat=12

08-30-2009, 10:14 PM	#3
Big-Blue Registered User Join Date: Dec 2008 Location: highland village, TX Posts: 309	Re: Spring Bushings 1968 GMC 9/10 I could very well be wrong on this...but I think that 67-68 rear springs were 3" and 69-72 were 2 1/2. I don't believe that Canada had much to do with it. I am sure that someone will weigh in with a 67 or 68 though. In any case, LMC has 67-68 ones for around $20...each I believe...ouch! You can probably order poly ones from any lift company such as Skyjacker but seems like they are a bit stiff. Just what I have heard, no personal experience with them. Good luck.

08-30-2009, 10:56 PM	#4
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Spring Bushings 1968 GMC 9/10 call Energy and tell them what you need. They will send the right setup... I had to convince them that my 68 had the HD setup on the front and they sent what I needed for free. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.