Rant: 4 fenders are junk :( - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Billla* · 01-21-2006, 08:13 PM

Having a lousy day - I just blasted the fenders from the parts truck I bought as "no rust, no bondo" - they're junk; so much body work they're useless. When I asked the seller about it, he said "yeah, well...I gave you two extra fenders, and they're GREAT. I just blasted those, TSP'd 'em and was putting etch on...they looked really good...and then I noticed someone had cut the inner top out - the place where the hood hinge mounts. Just cut it right out - for a lowrider I would guess. So...4 fenders, all junk. Looks like it's time for a Goodmark order

It's my fault - I let my father-in-law look at the truck instead of going myself. BUT, the guy is on this board, and I understand that we don't out people 1:1 but I'd hate to think someone else would buy from him and get screwed...so if he's reading it here's a big, fat

for him.

Yark.

shifty · 01-21-2006, 08:37 PM

Sorry about your luck man. At least make sure an admin knows about your transaction that way if things like this happen again to others, that person can be banned from the site at least.

JAKES 68GMC · 01-21-2006, 09:00 PM

Ouch. Bedsides aren't too cheap, but front fender are reasonable, aren't they? Around 150 bucks?? Sorry to hear about your misfortune.

krue · 01-21-2006, 09:01 PM

If you think you got screwed, you may wanna pm Josh or Liz. BTW you CAN write a Review on ANY one stating the FACTS about the transaction (try not to make it TOO personal) in the Review Board, just so everyone else goes into a deal with both eyes open.

hotrodhomi · 01-22-2006, 12:40 AM

if you bought somehing and didn't look at it first, it is your fault. I learned that lesson a few times. Better luck next time

krue · 01-22-2006, 12:48 AM

Quote:

Originally Posted by hotrodhomi

if you bought somehing and didn't look at it first, it is your fault. I learned that lesson a few times. Better luck next time

Actually if it is misrepresented it's the sellers responsibility to make it right. Otherwise we'll have to quit buying and selling here.

shifty · 01-22-2006, 12:43 AM

hotrod, normally I would agree with you, but I also recognize two things:

1) here on the forum, you don't expect that another member would blatantly rip you off

2) when doing transactions on the internet, it's really hard to look at things sometimes. .... he sent someone out...and the combination of trusting a fellow board member and sending someone out to boot should be enough.

**special-K** · 01-22-2006, 01:29 AM

Were they bought from a board member from off of the site or are you both board members that made a deal lpcally outside of the board?If it was offsite,it`s between you two.
I don`t think there`s any excuse for selling crap as usable parts.Even if the buyer looks right at it and doesn`t realize it`s not useable.Some people still trust.Is that wrong?

CG · 01-22-2006, 01:49 AM

did you talk to him first when you found out the stuff wasnt as represented or did you come to the forum right away? i sold some stuff i thought was rust free and wasnt. he went over it with a fine tooth comb and i hadnt done that when i purchased it originally. i offered to pay the guys expense from getting from his place to mine. we worked it out though, i lowered my price a bit, he got what he wanted and we didnt have to air anything out in public. simple.

krue · 01-22-2006, 02:10 AM

Since he hasn't mentioned anyones name yet I'm guessing this isn't a pissing match, yet anyways.

**tnblazerk5** · 01-22-2006, 02:12 AM

Quote:

Originally Posted by krue

Since he hasn't mentioned anyones name yet I'm guessing this isn't a pissing match, yet anyways.

i have to agree there

Striker169 · 01-22-2006, 02:30 AM

dam I hate it when **** like that happens one persons oppenion doesnt allways go with anothers

OJOE · 01-22-2006, 09:41 AM

did you see them before you had them blasted? if you did and liked them, maybe that is the way the seller seen before he sent them to you

Solver · 01-22-2006, 12:49 PM

Without knowing more I would have to agree with OJOE on this one.Many times I have bought parts that looked good only to blast and find all kinds of crap. Sand blasting can punch holes through metal that is maybe a little weak after 35 years and good body work is obviously impossible to see. As far as the cut fenders if it took you the whole process of working on them before finding the missing parts he could just have easily not seen the missing parts.I guess All I'm saying is that how could he have known? Is it unfortunate yes-- Is it his fault well maybe not! Does this make him a untrustworthy seller - If he (and you) couldn't know whats under the paint - probably not
Since you posted on board I have to assume you have already tried to get a refund or compensation and he said no. Do we need to know his name so we don't buy from him-- Kind of sounds like a little blackmail to me
No not my sale --just wanted to point out for the other side of the coin.

*1969owner* · 01-22-2006, 12:52 PM

the first thing i would do is pm josh or liz. thatll take care of it.

pat · 01-22-2006, 03:55 PM

Quote:

Originally Posted by Billla

Having a lousy day - I just blasted the fenders from the parts truck I bought as "no rust, no bondo" - they're junk; so much body work they're useless.

Hey, at least it wasnt a whole truck, like the one I bought.

01-21-2006, 08:13 PM	#1
Billla Account Suspended Join Date: Sep 2005 Location: Monroe, WA Posts: 3,815	Rant: 4 fenders are junk :( Having a lousy day - I just blasted the fenders from the parts truck I bought as "no rust, no bondo" - they're junk; so much body work they're useless. When I asked the seller about it, he said "yeah, well...I gave you two extra fenders, and they're GREAT. I just blasted those, TSP'd 'em and was putting etch on...they looked really good...and then I noticed someone had cut the inner top out - the place where the hood hinge mounts. Just cut it right out - for a lowrider I would guess. So...4 fenders, all junk. Looks like it's time for a Goodmark order It's my fault - I let my father-in-law look at the truck instead of going myself. BUT, the guy is on this board, and I understand that we don't out people 1:1 but I'd hate to think someone else would buy from him and get screwed...so if he's reading it here's a big, fat for him. Yark.

01-21-2006, 08:37 PM	#2
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,376	Re: Rant: 4 fenders are junk :( Sorry about your luck man. At least make sure an admin knows about your transaction that way if things like this happen again to others, that person can be banned from the site at least. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

01-21-2006, 09:00 PM	#3
JAKES 68GMC Aluminum slot wheels rule... Join Date: Jan 2006 Location: Maine Posts: 6,212	Re: Rant: 4 fenders are junk :( Ouch. Bedsides aren't too cheap, but front fender are reasonable, aren't they? Around 150 bucks?? Sorry to hear about your misfortune.

01-21-2006, 09:01 PM	#4
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: Rant: 4 fenders are junk :( If you think you got screwed, you may wanna pm Josh or Liz. BTW you CAN write a Review on ANY one stating the FACTS about the transaction (try not to make it TOO personal) in the Review Board, just so everyone else goes into a deal with both eyes open. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

01-22-2006, 12:40 AM	#5
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: Rant: 4 fenders are junk :( if you bought somehing and didn't look at it first, it is your fault. I learned that lesson a few times. Better luck next time __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht

01-22-2006, 12:43 AM	#7
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,376	Re: Rant: 4 fenders are junk :( hotrod, normally I would agree with you, but I also recognize two things: 1) here on the forum, you don't expect that another member would blatantly rip you off 2) when doing transactions on the internet, it's really hard to look at things sometimes. .... he sent someone out...and the combination of trusting a fellow board member and sending someone out to boot should be enough. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

01-22-2006, 01:29 AM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Rant: 4 fenders are junk :( Were they bought from a board member from off of the site or are you both board members that made a deal lpcally outside of the board?If it was offsite,it`s between you two. I don`t think there`s any excuse for selling crap as usable parts.Even if the buyer looks right at it and doesn`t realize it`s not useable.Some people still trust.Is that wrong? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-22-2006, 01:49 AM	#9
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,789	Re: Rant: 4 fenders are junk :( did you talk to him first when you found out the stuff wasnt as represented or did you come to the forum right away? i sold some stuff i thought was rust free and wasnt. he went over it with a fine tooth comb and i hadnt done that when i purchased it originally. i offered to pay the guys expense from getting from his place to mine. we worked it out though, i lowered my price a bit, he got what he wanted and we didnt have to air anything out in public. simple.

01-22-2006, 02:10 AM	#10
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: Rant: 4 fenders are junk :( Since he hasn't mentioned anyones name yet I'm guessing this isn't a pissing match, yet anyways. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

01-22-2006, 02:30 AM	#12
Striker169 Car O'Holic Join Date: Jan 2005 Location: Austin, Tx. Posts: 692	Re: Rant: 4 fenders are junk :( dam I hate it when **** like that happens one persons oppenion doesnt allways go with anothers

01-22-2006, 09:41 AM	#13
OJOE Crew Cut Join Date: Dec 2005 Location: MONTGOMERY,AL Posts: 757	Re: Rant: 4 fenders are junk :( did you see them before you had them blasted? if you did and liked them, maybe that is the way the seller seen before he sent them to you __________________ 85 SWB 1/2 TON CREWCAB/5.3 03 CHEV 3500 DURAMAX CREW CAB 85 CHEV SWB/TPI 06 CHEV TAHOE (WIFES) 30 MODEL A HOT ROD 07 HARLEY DAVIDSON BAGGER 09 STREET GLIDE AN D A LOT MORE JUNK

01-22-2006, 12:49 PM	#14
Solver Registered User Join Date: May 2000 Location: Storm Lake, Ia Posts: 1,449	Re: Rant: 4 fenders are junk :( Without knowing more I would have to agree with OJOE on this one.Many times I have bought parts that looked good only to blast and find all kinds of crap. Sand blasting can punch holes through metal that is maybe a little weak after 35 years and good body work is obviously impossible to see. As far as the cut fenders if it took you the whole process of working on them before finding the missing parts he could just have easily not seen the missing parts.I guess All I'm saying is that how could he have known? Is it unfortunate yes-- Is it his fault well maybe not! Does this make him a untrustworthy seller - If he (and you) couldn't know whats under the paint - probably not Since you posted on board I have to assume you have already tried to get a refund or compensation and he said no. Do we need to know his name so we don't buy from him-- Kind of sounds like a little blackmail to me No not my sale --just wanted to point out for the other side of the coin. __________________ 1972 Cheyenne Super 20 LWB-Blue 1972 Cheyenne Super 10 LWB-Black 1972 Cheyenne Super 10 LWB-Red 1972 Cheyenne Super 10 LWB-green 1972 GMC 4x4 LWB-White 1971 Cheyenne 10 LWB-Ochre 1971 Cheyenne 20 Longhorn-Copper 1971 Cheyenne 20 Longhorn-Black 1969 Custom 10 LWB-lt blue 1968 GMC 3/4 ton-green 1968 1/2 ton swb stepside-silver 1967 Chevrolet CST 10 LWB-green 1967 Chevrolet custom 20 LWB-Maroon

01-22-2006, 12:52 PM	#15
1969owner Account Suspended Join Date: Dec 2005 Location: martin georgia Posts: 568	Re: Rant: 4 fenders are junk :( the first thing i would do is pm josh or liz. thatll take care of it. Last edited by 1969owner; 01-22-2006 at 12:52 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.