Canada WTB the aftermarket hooks found on Fleetside's - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**aerotruk63** · 02-21-2019, 07:42 PM

You see these old hooks that are held by two fasteners usually installed on an angle on the sides of Fleetside beds. Simple fish hook design. Have holes in my box and thought , what the heck , I'll try and find some to fill these holes.

**aerotruk63** · 02-21-2019, 07:54 PM

Photo as reference.

**Ironhorse** · 02-21-2019, 08:21 PM

May have a few of those in the garage. I know I removed some from a truck bed I scrapped out years ago. Not for sure I kept them but will look. How many of them are you needing?

1960chevypanel · 02-21-2019, 11:46 PM

I keep getting stuck to a couple of my trucks when I walk past them, so yeah I think I have some.. How many do you need?

tchevs · 02-22-2019, 09:01 AM

I have some, how many do you need?

**aerotruk63** · 02-23-2019, 06:18 AM

I need four to cover the four sets of holes that I have. The fastener spacing is 1 1/4" center to center. The fasteners would be interesting to see what was used.

**aerotruk63** · 02-23-2019, 07:44 AM

**The Rocknrod** · 02-23-2019, 09:28 AM

Just some ideas on what to look for in case you dont find them:
http://boxertiedown.com/wholesale/-c...ope-hook-p-423
https://www.buyersproducts.com/product/tarp-hook-673
https://www.uscargocontrol.com/Rope-...Zinc-3000-Lbs-

tchevs · 02-23-2019, 10:01 AM

Maybe the ones I have are different. I took these off a 65 gmc. C-C is only 1-3/16”. Bolts were regular 1/4-20.

**Ironhorse** · 02-23-2019, 11:32 AM

The ones I have are same as tchevs in center to center dimension. Also have four larger ones that measure 1 13/16'' center to center. Sorry, can't help with the center to center size you need.

Killer Bee · 02-23-2019, 02:19 PM

OP, not sure what look you're going for but they make these today as master chief pointed out..

I have some hanging in my desk drawer at work, google 'tarp hooks' and a bunch should show up..

just need to find your mounting centers but 1/16" doesn't seem like much, probably wiggle in there..

as far as the rusty ones offered up, you mind if I ask for some after you get yours figured out?

I was actually asking for rusty tarp hooks for my rusty 65 from a few guys I've bought parts from but never found any..

thanks and good luck!

**aerotruk63** · 02-23-2019, 06:28 PM

As you stated Killer Bee , 1/16 is not a lot of difference. A Patina'd washer could cover that easy. lol.

Thank You Ironhorse for looking , perhaps you can help Killer Bee out.

tchevs How much am I looking at?

The Rocknrod , great info as always. I'll go with the rust to keep the vintage look. Really hard not to go to town as I did on my Blue one. Restraint required....lol

**Ironhorse** · 02-23-2019, 06:43 PM

aerotruk63, looks like your getting set up with the hooks you need. When all said and done I'll offer the ones I have to Killer Bee. I'm on stand by right now with the rusty patina hooks I have.

Killer Bee · 02-23-2019, 06:47 PM

I agree completely, after OP receives a good set that fits his needs..

please let us know and then I'd be happy to buy a set of 4 or even 6 if available.. long bed

good luck, hope they fit right up!

tchevs · 02-23-2019, 07:00 PM

Hey guys. My short bed came with two broken and six like you see them. Although rusty trucks look badass, it is not for me. Since you’re in Canada figure out the shipping and pay me what you think is fair for the hooks. Just glad someone can use them.

**aerotruk63** · 02-23-2019, 07:38 PM

Would $15 shipped get them sent to a New York State address?

**aerotruk63** · 02-23-2019, 07:45 PM

Shipping is a ***** these days so if we need to adjust!
Zip is 12953. 20 minutes from my place but so much easier on everyone.

tchevs · 02-23-2019, 07:56 PM

Small flat rate box should get it to New York.

**aerotruk63** · 02-23-2019, 08:43 PM

Let me know for payment after you check on shipping cost please.

tchevs · 02-26-2019, 09:08 AM

Quote:

Originally Posted by aerotruk63

Let me know for payment after you check on shipping cost please.

Pm sent

**aerotruk63** · 02-27-2019, 07:21 AM

No PM received.

tchevs · 02-27-2019, 11:46 PM

Received your payment. I’ll need that New York address. Thank you

**aerotruk63** · 02-28-2019, 06:48 AM

PM sent with address. Thanks.

**Ironhorse** · 03-01-2019, 09:28 AM

aerotruk63, glad things worked out for you and you got the hooks you need headed your way.

Killer Bee, looks as if things have worked out for aerotruk63 to get his hooks. If still have an interest in the ones I have let me know. Have four larger hooks and two smaller hooks as in the picture from tchevs. Think the thing to do is start a new thread rather than coat tail along on here. Will do so with some pics if still have an interest in mine.

Killer Bee · 03-01-2019, 05:42 PM

^ yes interested, sending pm

02-21-2019, 07:42 PM	#1
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	WTB the aftermarket hooks found on Fleetside's You see these old hooks that are held by two fasteners usually installed on an angle on the sides of Fleetside beds. Simple fish hook design. Have holes in my box and thought , what the heck , I'll try and find some to fill these holes. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

02-21-2019, 07:54 PM	#2
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: WTB the aftermarket hooks found on Fleetside's Photo as reference. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

02-21-2019, 08:21 PM	#3
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,028	Re: WTB the aftermarket hooks found on Fleetside's May have a few of those in the garage. I know I removed some from a truck bed I scrapped out years ago. Not for sure I kept them but will look. How many of them are you needing? __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

02-21-2019, 11:46 PM	#4
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,605	Re: WTB the aftermarket hooks found on Fleetside's I keep getting stuck to a couple of my trucks when I walk past them, so yeah I think I have some.. How many do you need?

02-22-2019, 09:01 AM	#5
tchevs Registered User Join Date: Feb 2017 Location: Castroville California Posts: 492	Re: WTB the aftermarket hooks found on Fleetside's I have some, how many do you need?

02-23-2019, 06:18 AM	#6
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: WTB the aftermarket hooks found on Fleetside's I need four to cover the four sets of holes that I have. The fastener spacing is 1 1/4" center to center. The fasteners would be interesting to see what was used. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

02-23-2019, 07:44 AM	#7
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: WTB the aftermarket hooks found on Fleetside's __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

02-23-2019, 09:28 AM	#8
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: WTB the aftermarket hooks found on Fleetside's Just some ideas on what to look for in case you dont find them: http://boxertiedown.com/wholesale/-c...ope-hook-p-423 https://www.buyersproducts.com/product/tarp-hook-673 https://www.uscargocontrol.com/Rope-...Zinc-3000-Lbs- __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

02-23-2019, 10:01 AM	#9
tchevs Registered User Join Date: Feb 2017 Location: Castroville California Posts: 492	Re: WTB the aftermarket hooks found on Fleetside's Maybe the ones I have are different. I took these off a 65 gmc. C-C is only 1-3/16”. Bolts were regular 1/4-20. Attached Images

02-23-2019, 11:32 AM	#10
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,028	Re: WTB the aftermarket hooks found on Fleetside's The ones I have are same as tchevs in center to center dimension. Also have four larger ones that measure 1 13/16'' center to center. Sorry, can't help with the center to center size you need. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

02-23-2019, 02:19 PM	#11
Killer Bee Registered User Join Date: Jan 2016 Location: Barber City, CA Posts: 4,728	Re: WTB the aftermarket hooks found on Fleetside's OP, not sure what look you're going for but they make these today as master chief pointed out.. I have some hanging in my desk drawer at work, google 'tarp hooks' and a bunch should show up.. just need to find your mounting centers but 1/16" doesn't seem like much, probably wiggle in there.. as far as the rusty ones offered up, you mind if I ask for some after you get yours figured out? I was actually asking for rusty tarp hooks for my rusty 65 from a few guys I've bought parts from but never found any.. thanks and good luck! __________________ *I started out with nothing - and I still have most of it*

02-23-2019, 06:28 PM	#12
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: WTB the aftermarket hooks found on Fleetside's As you stated Killer Bee , 1/16 is not a lot of difference. A Patina'd washer could cover that easy. lol. Thank You Ironhorse for looking , perhaps you can help Killer Bee out. tchevs How much am I looking at? The Rocknrod , great info as always. I'll go with the rust to keep the vintage look. Really hard not to go to town as I did on my Blue one. Restraint required....lol __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

02-23-2019, 06:43 PM	#13
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,028	Re: WTB the aftermarket hooks found on Fleetside's aerotruk63, looks like your getting set up with the hooks you need. When all said and done I'll offer the ones I have to Killer Bee. I'm on stand by right now with the rusty patina hooks I have. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

02-23-2019, 06:47 PM	#14
Killer Bee Registered User Join Date: Jan 2016 Location: Barber City, CA Posts: 4,728	Re: WTB the aftermarket hooks found on Fleetside's I agree completely, after OP receives a good set that fits his needs.. please let us know and then I'd be happy to buy a set of 4 or even 6 if available.. long bed good luck, hope they fit right up! __________________ *I started out with nothing - and I still have most of it*

02-23-2019, 07:00 PM	#15
tchevs Registered User Join Date: Feb 2017 Location: Castroville California Posts: 492	Re: WTB the aftermarket hooks found on Fleetside's Hey guys. My short bed came with two broken and six like you see them. Although rusty trucks look badass, it is not for me. Since you’re in Canada figure out the shipping and pay me what you think is fair for the hooks. Just glad someone can use them.



Register or Log In To remove these advertisements.

02-23-2019, 07:38 PM	#16
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: WTB the aftermarket hooks found on Fleetside's Would $15 shipped get them sent to a New York State address? __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

02-23-2019, 07:45 PM	#17
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: WTB the aftermarket hooks found on Fleetside's Shipping is a *** these days so if we need to adjust! Zip is 12953. 20 minutes from my place but so much easier on everyone. __________________ 1963 Chevrolet Truck Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original Chevrolet Truck** Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

02-23-2019, 07:56 PM	#18
tchevs Registered User Join Date: Feb 2017 Location: Castroville California Posts: 492	Re: WTB the aftermarket hooks found on Fleetside's Small flat rate box should get it to New York.

02-23-2019, 08:43 PM	#19
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: WTB the aftermarket hooks found on Fleetside's Let me know for payment after you check on shipping cost please. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

02-27-2019, 07:21 AM	#21
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: WTB the aftermarket hooks found on Fleetside's No PM received. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

02-27-2019, 11:46 PM	#22
tchevs Registered User Join Date: Feb 2017 Location: Castroville California Posts: 492	Re: WTB the aftermarket hooks found on Fleetside's Received your payment. I’ll need that New York address. Thank you

02-28-2019, 06:48 AM	#23
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: WTB the aftermarket hooks found on Fleetside's PM sent with address. Thanks. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

03-01-2019, 09:28 AM	#24
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,028	Re: WTB the aftermarket hooks found on Fleetside's aerotruk63, glad things worked out for you and you got the hooks you need headed your way. Killer Bee, looks as if things have worked out for aerotruk63 to get his hooks. If still have an interest in the ones I have let me know. Have four larger hooks and two smaller hooks as in the picture from tchevs. Think the thing to do is start a new thread rather than coat tail along on here. Will do so with some pics if still have an interest in mine. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

03-01-2019, 05:42 PM	#25
Killer Bee Registered User Join Date: Jan 2016 Location: Barber City, CA Posts: 4,728	Re: WTB the aftermarket hooks found on Fleetside's ^ yes interested, sending pm __________________ *I started out with nothing - and I still have most of it*

Register or Log In To remove these advertisements.