|
02-07-2019, 02:31 PM
|
#1 |
|
Registered User
Join Date: Dec 2018
Location: Dallas, PA
Posts: 546
|
Ram Horns ??
When I acquired my 64, it had a set of crappy rusted headers already installed, they look bad, and they hang pretty low.
I want to replace them. I have found, that I can get a set of cast iron aftermarket ram horn style manifolds, for a comparable price. I have a mild 350 4 BBL, that I'm happy with, no need for high performance. Also the cast manifolds should eliminate any clearance problems as well. Does anyone make a transition pipe to get from the ram horn manifolds , down under the truck ? Any comments or suggestions?? https://www.summitracing.com/parts/sum-g9200n/overview/ |
|
|
|
02-07-2019, 03:43 PM
|
#2 |
|
Moderator
  
Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
|
Re: Ram Horns ??
These have been known to work and come with the flanges, just cut as short as needed tack weld for fit and weld out when your happy:
https://www.speedwaymotors.com/Tight...teel,1722.html I don't know if these pre made units will fit the cross-member - https://pypesexhaust.com/i-12200745-...rn-dcc10s.html
__________________
Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? Last edited by The Rocknrod; 02-07-2019 at 04:05 PM. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
