67 cheby's Dropmember build thread (CLOUD 9) - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**67cheby** · 01-20-2010, 12:26 PM

slow progress but... it is progress

0331grunt · 01-20-2010, 12:36 PM

Pretty slick work..

98L150 · 01-20-2010, 02:32 PM

looking good. where did you get the fron wheel tubs or did yo make them?

**67cheby** · 01-20-2010, 02:43 PM

the tubs are 34 inch , from Suicide Doors

72BlckButy · 01-20-2010, 03:42 PM

Nice progress!

**67cheby** · 01-26-2010, 10:39 AM

here are some pics i wanted to see when i was considering laying my truck out, i have 20 inch wheels with 29 inch overall my frame is flat on the ground , i took these pics so you could see how much above the frame the axle is when it is aired out.. basically it sets right on top of the frame

hgs_notes · 01-26-2010, 01:55 PM

That's going to need more than a frame notch. Wow!

**67cheby** · 01-26-2010, 02:00 PM

i was hoping the bolt in notch would still work....LOL

0331grunt · 01-27-2010, 12:46 PM

Looks pretty good to me...

**67cheby** · 01-27-2010, 01:13 PM

its not the exact look i was hoping for but , its the best i have been able to come up with , they will be welded in place and finished out around them ...i will probably paint them black to make them look somewhat factory

**67cheby** · 02-03-2010, 10:44 AM

a little more progress with firewall tubs and started working on the step notch

nuke1 · 02-03-2010, 11:51 AM

nice truck, love the way you are doing this truck, will be one heck of a ride. Good progress so far, keep it up.

**67cheby** · 02-03-2010, 12:09 PM

thanks i appreciate the complements from all of you others with the same addiction !!

Ronm909 · 02-04-2010, 12:26 AM

awesome build!!! its like like into the future of what I would love to do with my project.

**67cheby** · 02-04-2010, 10:30 AM

thanks, mine is going to be silver is yours staying silver

BigShoe24 · 02-06-2010, 12:40 AM

Very Cool!!!! Keep it up

Bazooka · 02-06-2010, 02:26 AM

Looking really good. Keep it up!

nastyc10 · 02-06-2010, 04:27 AM

sweet!

**67cheby** · 02-10-2010, 10:26 AM

little more progress, notch will be done by the end of the week, getting the hood hinge mounts ready to weld on

GraybealGarage · 02-10-2010, 12:47 PM

Looking Good!

72BlckButy · 02-10-2010, 03:25 PM

Coming right along, nice work!

jasonhall · 02-10-2010, 11:12 PM

How do you like that hood hinge kit? Have any tips or tricks on what you have done so far?

**67cheby** · 02-11-2010, 10:38 AM

it is a sweet kit , easy installation, one tip just check and make sure your templates match the front of the hinge pocket before you drill the holes !! i assumed ... and you know what that does

woodwright · 02-13-2010, 01:04 AM

subscribing.

**67cheby** · 02-16-2010, 10:40 AM

a little more welding progress, thanks Brian, my 2 cents for anyone looking if you are buying one of the notches save yourself a lot of time and headache and buy the pre welded one !!

01-20-2010, 12:26 PM	#151
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67cheby DM 3.2 install, W/PB 4link, PB hood hinges slow progress but... it is progress __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-20-2010, 12:36 PM	#152
0331grunt Now what?? Join Date: Sep 2009 Location: Webbers Falls, OK Posts: 579	Re: Raising the bed floor 67cheby Pretty slick work.. __________________ 69 Long Fleet - Project 06 Ram 1ton Cummins 4x4-DD 01 Tahoe- wifes "The quality of a persons life is in direct proportion to their commitment to excellence, regardless of their chosen field of endeavor." ~ Vince Lombardi "A dream doesn't become reality through magic, it takes sweat, determination and hard work." ~ Colin Powell my, um, build USMC OIF Veteran SEMPER FI!

01-20-2010, 02:32 PM	#153
98L150 ///Relaxed Atmosphere Join Date: Apr 2003 Location: Hockley, TX Posts: 657	Re: 67cheby DM 3.2 install, W/PB 4link, PB hood hinges looking good. where did you get the fron wheel tubs or did yo make them? __________________ 72 Suburban 64 Chevy short fleet 04 Chevy Colorado Sport Reg Cab 2012 Chevy Avalanche 2003 Chevy S10 Blazer Xtreme http://www.hubgarage.com/mygarage/RA_Jeff 64 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=295915

01-20-2010, 02:43 PM	#154
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67cheby DM 3.2 install, W/PB 4link, PB hood hinges the tubs are 34 inch , from Suicide Doors __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-20-2010, 03:42 PM	#155
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 67cheby DM 3.2 install, W/PB 4link, PB hood hinges Nice progress! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

01-26-2010, 10:39 AM	#156
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67cheby DM 3.2 install, W/PB 4link, PB hood hinges here are some pics i wanted to see when i was considering laying my truck out, i have 20 inch wheels with 29 inch overall my frame is flat on the ground , i took these pics so you could see how much above the frame the axle is when it is aired out.. basically it sets right on top of the frame Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-26-2010, 01:55 PM	#157
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,107	Re: Raising the bed floor 67cheby That's going to need more than a frame notch. Wow! __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

01-26-2010, 02:00 PM	#158
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Raising the bed floor 67cheby i was hoping the bolt in notch would still work....LOL __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-27-2010, 12:46 PM	#159
0331grunt Now what?? Join Date: Sep 2009 Location: Webbers Falls, OK Posts: 579	Re: Raising the bed floor 67cheby Looks pretty good to me... __________________ 69 Long Fleet - Project 06 Ram 1ton Cummins 4x4-DD 01 Tahoe- wifes "The quality of a persons life is in direct proportion to their commitment to excellence, regardless of their chosen field of endeavor." ~ Vince Lombardi "A dream doesn't become reality through magic, it takes sweat, determination and hard work." ~ Colin Powell my, um, build USMC OIF Veteran SEMPER FI!

01-27-2010, 01:13 PM	#160
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Raising the bed floor 67cheby its not the exact look i was hoping for but , its the best i have been able to come up with , they will be welded in place and finished out around them ...i will probably paint them black to make them look somewhat factory __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-03-2010, 10:44 AM	#161
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67cheby DM 3.2 install, W/PB 4link, PB hood hinges a little more progress with firewall tubs and started working on the step notch Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-03-2010, 11:51 AM	#162
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: Raising the bed floor 67cheby nice truck, love the way you are doing this truck, will be one heck of a ride. Good progress so far, keep it up. __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

02-03-2010, 12:09 PM	#163
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Raising the bed floor 67cheby thanks i appreciate the complements from all of you others with the same addiction !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-04-2010, 12:26 AM	#164
Ronm909 67GMC Slammed Join Date: Feb 2009 Location: Rancho Cucamonga, Ca Posts: 255	Re: Raising the bed floor 67cheby awesome build!!! its like like into the future of what I would love to do with my project. __________________ my dropmembered 67 GMC build thread http://67-72chevytrucks.com/vboard/s...d.php?t=383215

02-04-2010, 10:30 AM	#165
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Raising the bed floor 67cheby thanks, mine is going to be silver is yours staying silver __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172



Register or Log In To remove these advertisements.

02-06-2010, 12:40 AM	#166
BigShoe24 True Addiction Join Date: Nov 2005 Location: FTL Posts: 415	Re: 67cheby DM 3.2 install, W/PB 4link, PB hood hinges Very Cool!!!! Keep it up __________________ RCC

02-06-2010, 02:26 AM	#167
Bazooka Keepin it old school Join Date: Jul 2008 Location: Ca Posts: 672	Re: 67cheby DM 3.2 install, W/PB 4link, PB hood hinges Looking really good. Keep it up!

02-06-2010, 04:27 AM	#168
nastyc10 Registered User Join Date: Aug 2009 Location: Austin, Tx Posts: 516	Re: 67cheby DM 3.2 install, W/PB 4link, PB hood hinges sweet!

02-10-2010, 10:26 AM	#169
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67cheby DM 3.2 install, W/PB 4link, PB hood hinges little more progress, notch will be done by the end of the week, getting the hood hinge mounts ready to weld on Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-10-2010, 12:47 PM	#170
GraybealGarage Registered User Join Date: Jul 2005 Location: Pendleton, OR Posts: 150	Re: 67cheby DM 3.2 install, W/PB 4link, PB hood hinges Looking Good! __________________ Jason 1971 SWB currently reconstructing... Dropmembers, 20/22 rushforths... Build: http://67-72chevytrucks.com/vboard/s...d.php?t=467329

02-10-2010, 03:25 PM	#171
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 67cheby DM 3.2 install, W/PB 4link, PB hood hinges Coming right along, nice work! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

02-10-2010, 11:12 PM	#172
jasonhall Registered User Join Date: May 2008 Location: Stillwater Oklahoma Posts: 829	Re: 67cheby DM 3.2 install, W/PB 4link, PB hood hinges How do you like that hood hinge kit? Have any tips or tricks on what you have done so far?

02-11-2010, 10:38 AM	#173
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67cheby DM 3.2 install, W/PB 4link, PB hood hinges it is a sweet kit , easy installation, one tip just check and make sure your templates match the front of the hinge pocket before you drill the holes !! i assumed ... and you know what that does __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-13-2010, 01:04 AM	#174
woodwright Enjoying left field Join Date: Jun 2008 Location: Dillon Montana Posts: 900	Re: 67cheby DM 3.2 install, W/PB 4link, PB hood hinges subscribing. __________________ Clint 70 Chevy 4WD "Ultimate Work Truck" SOLD

02-16-2010, 10:40 AM	#175
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67cheby DM 3.2 install, W/PB 4link, PB hood hinges a little more welding progress, thanks Brian, my 2 cents for anyone looking if you are buying one of the notches save yourself a lot of time and headache and buy the pre welded one !! Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

Register or Log In To remove these advertisements.