CA Parting 77 Scottsdale 1/2 ton 4x4 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

twisted gear tim · 01-21-2012, 12:38 PM

if the other one you're gonna part out has the dome/cargo light that flips down, i'd be very interested.

KrazyRay · 01-21-2012, 08:24 PM

tim...I will check the other truck next week.

Bob... The gas tank doors look good, but there is primer on the outside. I don't think the po used bondo, but not 100% sure as the inside looks clean. $5 each door plus shipping and I'm still trying to unscrew the bolts...pb blaster.

Thanks,
Ray

JRANGER · 01-21-2012, 08:30 PM

How much for a good piece of the bed say 1.5ft x 1.5ft? Shipped to 37138 Yeah, I just need a small patch for the back right corner and not sure I want to hammer it right lol

KrazyRay · 01-21-2012, 08:36 PM

The bed is pretty clean on this one so I don't want to cut it up yet.
Thanks,
Ray

JRANGER · 01-21-2012, 08:38 PM

ok, maybe ill pound a piece out then lol

Rogue_Sentinel · 01-21-2012, 10:32 PM

any pics of the seatbelts and sun visor

KrazyRay · 01-22-2012, 01:21 AM

Sorry, they are junk.

KrazyRay · 01-22-2012, 04:27 PM

Brian, I pulled the heater box and it looks good. Shipping to MA is going to be $25 for a total of $55.
Thanks,
Ray

MilkyJoe · 01-22-2012, 06:42 PM

are the cargo tie downs on yhe bed still there?

madcow75 · 01-22-2012, 08:22 PM

Payment sent for cab light Thanks.

liftlawssuck · 01-23-2012, 01:54 PM

Looks and sounds good to me. I'll take it. Pm sent.

KrazyRay · 01-23-2012, 04:39 PM

Quote:

Originally Posted by MilkyJoe

are the cargo tie downs on yhe bed still there?

Yes, I just checked and all 6 are there. They have some scratches and some pitting, but look to be in good useable shape. $20 shipped for all 6.
Thanks,
Ray

liftlawssuck · 01-23-2012, 07:54 PM

Hey Ray, Payment sent through Paypal. Let me know if it didn't go through. Anything on the torx head srcews? Thanks, Brian

KrazyRay · 01-23-2012, 08:41 PM

Sorry, I forgot...they are phillips.
Thanks,
Ray

**old Rusty C10** · 01-24-2012, 06:23 PM

still waiting to hear about those gas doors if ya have time

JRANGER · 01-24-2012, 06:24 PM

He posted up the door at the top of the 2nd page

*Stew_Magoo* · 01-24-2012, 07:01 PM

Quote:

Originally Posted by KrazyRay

DMV penalties went through the roof. I

????????????????????????????????????

KrazyRay · 01-24-2012, 10:13 PM

Bob, I posted pics at the top of page 2. I am soaking the screws with pb and hope to have them pulled soon.
Stew...In CA, when you don't register your vehicle on time the DMV charges huge penalties especially after 3 years.

**old Rusty C10** · 01-25-2012, 09:52 AM

i didnt notice the pics sorry... ill definately take em both give me a quoate and i can paypal you or do amoney order whichever you prefer

KrazyRay · 01-25-2012, 11:40 AM

Bob, I will get you a shipping quote when they are pulled.
Thanks,
Ray

ECU PIRATE · 01-26-2012, 08:38 AM

Ray,

Are you interested in parting with the flywheel inspection cover? I am also looking for a clutch fork spring, cluthc fork push rod retainer spring, and some factory bolts to mount the bell housing to the block.

Thanks,
Mike

KrazyRay · 01-26-2012, 04:50 PM

I will check, but I think the only thing I have is the fork spring The bolts are buried.
Thanks,
Ray

KrazyRay · 01-28-2012, 02:00 AM

Here's the fork spring. I'm still trying to find a flywheel cover. $7 shipped for the spring.
Thanks,
Ray

**tkeduk8r** · 01-29-2012, 01:36 AM

radio any good????
--Mike

KrazyRay · 01-29-2012, 11:56 AM

Sorry, the radio is junk.
Thanks,
Ray

01-21-2012, 12:38 PM	#26
twisted gear tim Registered User Join Date: May 2010 Location: napoleon,oh Posts: 20	Re: Parting 77 Scottsdale 1/2 ton 4x4 if the other one you're gonna part out has the dome/cargo light that flips down, i'd be very interested. __________________ GAWD!!!! i sure hope mama dont find my parts receipts!!!!

01-21-2012, 08:24 PM	#27
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 77 Scottsdale 1/2 ton 4x4 tim...I will check the other truck next week. Bob... The gas tank doors look good, but there is primer on the outside. I don't think the po used bondo, but not 100% sure as the inside looks clean. $5 each door plus shipping and I'm still trying to unscrew the bolts...pb blaster. Thanks, Ray Attached Images

01-21-2012, 08:30 PM	#28
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: Parting 77 Scottsdale 1/2 ton 4x4 How much for a good piece of the bed say 1.5ft x 1.5ft? Shipped to 37138 Yeah, I just need a small patch for the back right corner and not sure I want to hammer it right lol __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

01-21-2012, 08:36 PM	#29
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 77 Scottsdale 1/2 ton 4x4 The bed is pretty clean on this one so I don't want to cut it up yet. Thanks, Ray

01-21-2012, 08:38 PM	#30
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: Parting 77 Scottsdale 1/2 ton 4x4 ok, maybe ill pound a piece out then lol __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

01-21-2012, 10:32 PM	#31
Rogue_Sentinel Registered User Join Date: Mar 2009 Location: nc, mount airy Posts: 376	Re: Parting 77 Scottsdale 1/2 ton 4x4 any pics of the seatbelts and sun visor __________________ "Myths and legends die hard in America. We love them for the extra dimension they provide, the illusion of near-infinite possibility to erase the narrow confines of most men's reality. Weird heroes and mould-breaking champions exist as living proof to those who need it that the tyranny of 'the rat race' is not yet final." Hunter S THompson

01-22-2012, 01:21 AM	#32
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 77 Scottsdale 1/2 ton 4x4 Sorry, they are junk.

01-22-2012, 04:27 PM	#33
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 77 Scottsdale 1/2 ton 4x4 Brian, I pulled the heater box and it looks good. Shipping to MA is going to be $25 for a total of $55. Thanks, Ray Attached Images

01-22-2012, 06:42 PM	#34
MilkyJoe Registered User Join Date: Oct 2011 Location: Fort Knox, Kentucky Posts: 91	Re: Parting 77 Scottsdale 1/2 ton 4x4 are the cargo tie downs on yhe bed still there?

01-22-2012, 08:22 PM	#35
madcow75 Registered User Join Date: Jun 2009 Location: Fort Erie , Ontario Posts: 525	Re: Parting 77 Scottsdale 1/2 ton 4x4 Payment sent for cab light Thanks.

01-23-2012, 01:54 PM	#36
liftlawssuck Registered User Join Date: Mar 2011 Location: MA Posts: 353	Re: Parting 77 Scottsdale 1/2 ton 4x4 Looks and sounds good to me. I'll take it. Pm sent.

01-23-2012, 07:54 PM	#38
liftlawssuck Registered User Join Date: Mar 2011 Location: MA Posts: 353	Re: Parting 77 Scottsdale 1/2 ton 4x4 Hey Ray, Payment sent through Paypal. Let me know if it didn't go through. Anything on the torx head srcews? Thanks, Brian

01-23-2012, 08:41 PM	#39
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 77 Scottsdale 1/2 ton 4x4 Sorry, I forgot...they are phillips. Thanks, Ray

01-24-2012, 06:23 PM	#40
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,261	Re: Parting 77 Scottsdale 1/2 ton 4x4 still waiting to hear about those gas doors if ya have time __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

01-24-2012, 06:24 PM	#41
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: Parting 77 Scottsdale 1/2 ton 4x4 He posted up the door at the top of the 2nd page __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper



Register or Log In To remove these advertisements.

01-24-2012, 10:13 PM	#43
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 77 Scottsdale 1/2 ton 4x4 Bob, I posted pics at the top of page 2. I am soaking the screws with pb and hope to have them pulled soon. Stew...In CA, when you don't register your vehicle on time the DMV charges huge penalties especially after 3 years.

01-25-2012, 09:52 AM	#44
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,261	Re: Parting 77 Scottsdale 1/2 ton 4x4 i didnt notice the pics sorry... ill definately take em both give me a quoate and i can paypal you or do amoney order whichever you prefer __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

01-25-2012, 11:40 AM	#45
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 77 Scottsdale 1/2 ton 4x4 Bob, I will get you a shipping quote when they are pulled. Thanks, Ray

01-26-2012, 08:38 AM	#46
ECU PIRATE Registered User Join Date: Apr 2009 Location: Centreville, Virginia Posts: 846	Re: Parting 77 Scottsdale 1/2 ton 4x4 Ray, Are you interested in parting with the flywheel inspection cover? I am also looking for a clutch fork spring, cluthc fork push rod retainer spring, and some factory bolts to mount the bell housing to the block. Thanks, Mike __________________ The Fleet........ 68' Camaro - 1st car (restored & still have it) 09' VW Tiguan (Wife's Daily Driver) 14' VW Passat SE TSI (my personal) 14' Ford Edge Sport (Daily Work Vehicle) 73' SWB Stepside - 77K org. miles 74' LWB 454/TH400 - drive train transplant for my (Sold) 98' SWB C1500 W/T - shop truck (Sold) 90' GMC Sierra SLE short step - aka " Jezabelle " (Sold)

01-26-2012, 04:50 PM	#47
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 77 Scottsdale 1/2 ton 4x4 I will check, but I think the only thing I have is the fork spring The bolts are buried. Thanks, Ray

01-28-2012, 02:00 AM	#48
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 77 Scottsdale 1/2 ton 4x4 Here's the fork spring. I'm still trying to find a flywheel cover. $7 shipped for the spring. Thanks, Ray Attached Images

01-29-2012, 01:36 AM	#49
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting 77 Scottsdale 1/2 ton 4x4 radio any good???? --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

01-29-2012, 11:56 AM	#50
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 77 Scottsdale 1/2 ton 4x4 Sorry, the radio is junk. Thanks, Ray

Register or Log In To remove these advertisements.