|
12-17-2015, 01:58 PM
|
#1 |
|
Registered User
Join Date: Nov 2015
Location: Winnipeg, Manitoba, Canada
Posts: 5
|
Belltech 5353 springs
I recently purchased a set of rear drop springs for my 69 -910 and I'm having issues with fitting the bottom spring retainer. I'm using the 1"spacer on the bottom as I purchased the kit for a 3"drop rather than a 4" My problem is that when I go to install the factory retainer (Ive ordered a new set)the lower spacer which comes up the middle of the spring and interferes with the retainer placement. Anyone else have this problem. Thanks in advance
|
|
|
|
12-17-2015, 02:54 PM
|
#2 |
|
Senior Member
 
Join Date: Sep 2007
Location: Albuquerque NM
Posts: 7,814
|
Re: Belltech 5353 springs
I would think that the cup would sit on top of the spacer to sandwich the spring against it but youre going to need 5.5 inch bolts for that.
__________________
1967custom Last edited by michael bustamante; 12-17-2015 at 03:17 PM. |
|
|
|
|
12-17-2015, 06:54 PM
|
#3 |
|
Registered User
Join Date: Nov 2015
Location: Winnipeg, Manitoba, Canada
Posts: 5
|
Re: Belltech 5353 springs
I asssumed that would also be the case, I have attached a picture of what it looks like sitting on top of the 1"spacer
|
|
|
|
|
12-17-2015, 06:58 PM
|
#4 |
|
67-72 parts collector,…
Join Date: Nov 2002
Location: Mid-MO
Posts: 22,682
|
Re: Belltech 5353 springs
I dont think I would run a spacer there.
I would want it bolted solid to the trailing arm.
__________________
Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
