Rack N Pinion on stock xmember, again...

[aggie91]

Originally Posted by 83 Silverado

I think the rack used in the No Limit kits is from a Chevy Colorado /GMC Canyon, it may be close for track width on your 66.

Nope, that's not correct.

Per Rob's post on another thread (63-72 rack and pinion):

"The racks start out as late model chevy truck (like 2000-2006 1/2 ton 2WD) We cut off the OE passenger side mount, and rotate the passenger side housing 180*. To fit up with the rotated housing, the formed pressure hard lines are custom made to fit. All of the consumable parts, boots, seals.... are from the 2000+chev 1/2T "

[83 Silverado]

Originally Posted by aggie91

Nope, that's not correct.

Per Rob's post on another thread (63-72 rack and pinion):

"The racks start out as late model chevy truck (like 2000-2006 1/2 ton 2WD) We cut off the OE passenger side mount, and rotate the passenger side housing 180*. To fit up with the rotated housing, the formed pressure hard lines are custom made to fit. All of the consumable parts, boots, seals.... are from the 2000+chev 1/2T "

That's bad info on my part, the rack in that kit looked close to rack in my 08 Canyon and to one I replaced in a friends truck, but looking back at the no limits one I can see the differences with the hard lines and an extra mount on the drivers side on the one in my truck.