Looking for OE & Moog P/N's -Front Suspension - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mcmlxix · 09-24-2003, 04:53 PM

If someone has access to the GM part numbers and the Moog part numbers for the 71-72 1/2 ton front suspension with Power Steering, please help. I want to rebuild the front end with Moog and need the part numbers. I also think this would make a good FAQ.
.......................................GM Part Number.........Moog Part Number
Upper Ball Joints
Lower Ball Joints
Inner Tie Rod Ends
Outer Tie Rod Ends
Tie Rod Sleeves
Idler Arm
Pitman Arm
Upper Arm Shafts
Lower Arm Shafts
New Upper Arm Shaft Shims
Lower Arm Shaft U Bolts
Drag Link (if available)

This is what I need. If we make this a FAQ and someone has the info. list the same for NON Power Steering 71-72 and the 67-70

slam33 · 09-24-2003, 10:56 PM

I use carparts.com they have all the moog #'s

mcmlxix · 09-25-2003, 09:54 AM

ok. I went the carparts.com route to find part numbers. Then I went to Summitracing.com for pricing and it came out to $520 for everything listed below. 71 c/10 with Power Steering

Lower Ball Joint, Enhanced Design 2 Required .........K6117T
Upper Ball Joint 2 Required .........K6124
Inner Tie Rod End 2 Required .........ES403L
Outer Tie Rod End 2 Required ..........ES415RL
Adjusting Sleeve 2 Required ...........ES2004S
Lower Control Arm Shaft Kit 2 Required ............K6147
Upper Control Arm Shaft Kit 2 Required ............K6098
Idler Arm, Improved & Enhanced Design 1 Required ...........K6096T
Pitman Arm, With Power Steering 1 Required ............K6131

1971 Cheyenne · 09-27-2003, 01:13 PM

I think that you can get the whole kit from Carolina Classics for around 490 dollars??? somewhere around there. I got my kit from Early Classic Enterprises and I paid around 525 dollars for it I think. Great service and fast shipping though. If you want a great experience, go with Early Classic.

mcmlxix · 10-07-2003, 09:16 AM

I just orderd all the moog front end parts online from :
http://www.autopartsgiant.com/
They were the cheapest $465 with free shipping. (ground)
The only thing I didn't order from them was the tie rod adjusting sleeves. I found a billet set for $35. To me the originals just look weak. I know they lasted for the first 32 years but the billet ones look so much stonger, and nicer too.

boraxman · 10-07-2003, 09:42 AM

Good luck with autopartsgiant.com. I have had a nightmare time with them. I ordered some Moog ball joints and other stuff for my truck. The 2 lowers were in the correct box but 2 different ball joints. I order 2 more, shipping & handling again. I send the first ones back(my dime) still no credit after a week. Im about ready to complain to the BBB.

mcmlxix · 10-07-2003, 10:51 AM

great! now I'm scared. I trie buying them locally but they all wanted outrageous amounts of money. I was going to go with ECE or Carolina Classics but I found these guys on line and free shipping. Well I hope this turns out better then your experience. I usually end up screwing myself looking for the "best deal" !!
How did you ID the parts not being Moog? Are they stamped? I still have another 5-7 days before the parts arrive..... i hope .. i hope .. i hope ...

boraxman · 10-07-2003, 11:41 AM

Hopefully you have better luck than me. Be sure to check everything as soon as you get it. I waited till I was ready to install and then found out. They were Moog parts, just two different ones.

loweredd · 10-08-2003, 10:21 PM

We sell MOOG at work. If you buy over 4 parts, you get a 10% discount. I bet I beat all others prices.

loweredd · 10-08-2003, 10:23 PM

dang it I wish I got comission. LOL. I love selling parts to people for cheap. I only wish when I called other places, they wouldn't hose me.

boraxman · 10-09-2003, 12:13 AM

Quote:

Originally posted by loweredd
We sell MOOG at work. If you buy over 4 parts, you get a 10% discount. I bet I beat all others prices.

If only I knew.

loweredd · 10-09-2003, 12:18 AM

hehehehehe

mcmlxix · 10-09-2003, 12:25 AM

Well I already placed my order so DONT tell me if you can get them cheaper ....

....

loweredd · 10-09-2003, 10:45 AM

ROFL, OK.

Canada20 · 10-09-2003, 03:03 PM

so what does "improved design" refer to in the patrs mentioned above? Improved how?

Greg

cwilli84 · 10-15-2003, 12:49 PM

Mother truckers has a complete set from Moog also. Good stuff and great service.

10-21-2003, 08:54 PM

edelbrock makes a set of adjusters that look pretty nice to me.

boraxman · 10-21-2003, 09:00 PM

Does anyone know if the Moog ball joints are prelubed? Seems like theres some lube but do they need more?

loweredd · 10-21-2003, 11:00 PM

you need to "top them off" with grease when you get them all installed. The lube that's in there is mainly to stiffle rust as it sits on the shelf.

boraxman · 10-21-2003, 11:30 PM

Quote:

Originally posted by loweredd
you need to "top them off" with grease when you get them all installed. The lube that's in there is mainly to stiffle rust as it sits on the shelf.

Thanks.

09-24-2003, 04:53 PM	#1
mcmlxix Collector of Projects Join Date: Apr 2003 Location: Las Vegas Posts: 3,106	Looking for OE & Moog P/N's -Front Suspension If someone has access to the GM part numbers and the Moog part numbers for the 71-72 1/2 ton front suspension with Power Steering, please help. I want to rebuild the front end with Moog and need the part numbers. I also think this would make a good FAQ. .......................................GM Part Number.........Moog Part Number Upper Ball Joints Lower Ball Joints Inner Tie Rod Ends Outer Tie Rod Ends Tie Rod Sleeves Idler Arm Pitman Arm Upper Arm Shafts Lower Arm Shafts New Upper Arm Shaft Shims Lower Arm Shaft U Bolts Drag Link (if available) This is what I need. If we make this a FAQ and someone has the info. list the same for NON Power Steering 71-72 and the 67-70 __________________ Rich 1972 K5 Blazer CST Click HERE D60 BIG BRAKE UPGRADE Click HERE

09-24-2003, 10:56 PM	#2
slam33 Registered User Join Date: Aug 2001 Location: Long Beach, Ca Posts: 1,432	I use carparts.com they have all the moog #'s __________________ 71 LWB 350/350still working on it but it's going tp be sweet. www.geocities.com/stevemau/slam33page.html " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A>

09-25-2003, 09:54 AM	#3
mcmlxix Collector of Projects Join Date: Apr 2003 Location: Las Vegas Posts: 3,106	ok. I went the carparts.com route to find part numbers. Then I went to Summitracing.com for pricing and it came out to $520 for everything listed below. 71 c/10 with Power Steering Lower Ball Joint, Enhanced Design 2 Required .........K6117T Upper Ball Joint 2 Required .........K6124 Inner Tie Rod End 2 Required .........ES403L Outer Tie Rod End 2 Required ..........ES415RL Adjusting Sleeve 2 Required ...........ES2004S Lower Control Arm Shaft Kit 2 Required ............K6147 Upper Control Arm Shaft Kit 2 Required ............K6098 Idler Arm, Improved & Enhanced Design 1 Required ...........K6096T Pitman Arm, With Power Steering 1 Required ............K6131 __________________ Rich 1972 K5 Blazer CST Click HERE D60 BIG BRAKE UPGRADE Click HERE

09-27-2003, 01:13 PM	#4
1971 Cheyenne Registered User Join Date: Nov 2002 Location: Bellevue, WA Posts: 1,480	I think that you can get the whole kit from Carolina Classics for around 490 dollars??? somewhere around there. I got my kit from Early Classic Enterprises and I paid around 525 dollars for it I think. Great service and fast shipping though. If you want a great experience, go with Early Classic. __________________ Brian Pal 1971 Cheyenne 10 454/th400-Undergoing a full frame off resto. 1972 Chevy short/step 2wd, 350/th350 1983 M1009 CUCV Military K5 Blazer 1981 Dodge 1 ton 4x4 dually flatbed

10-07-2003, 09:16 AM	#5
mcmlxix Collector of Projects Join Date: Apr 2003 Location: Las Vegas Posts: 3,106	I just orderd all the moog front end parts online from : http://www.autopartsgiant.com/ They were the cheapest $465 with free shipping. (ground) The only thing I didn't order from them was the tie rod adjusting sleeves. I found a billet set for $35. To me the originals just look weak. I know they lasted for the first 32 years but the billet ones look so much stonger, and nicer too. __________________ Rich 1972 K5 Blazer CST Click HERE D60 BIG BRAKE UPGRADE Click HERE

10-07-2003, 09:42 AM	#6
boraxman Keepin an eye out Join Date: Feb 2003 Location: So.Cal Posts: 3,921	Good luck with autopartsgiant.com. I have had a nightmare time with them. I ordered some Moog ball joints and other stuff for my truck. The 2 lowers were in the correct box but 2 different ball joints. I order 2 more, shipping & handling again. I send the first ones back(my dime) still no credit after a week. Im about ready to complain to the BBB. __________________ 1970 Chevy C10 SWB 5.3 1996 Toyota Tacoma SR5 4x4 2007 Vespa GTS 250 Scooter ZIP 91351

10-07-2003, 10:51 AM	#7
mcmlxix Collector of Projects Join Date: Apr 2003 Location: Las Vegas Posts: 3,106	great! now I'm scared. I trie buying them locally but they all wanted outrageous amounts of money. I was going to go with ECE or Carolina Classics but I found these guys on line and free shipping. Well I hope this turns out better then your experience. I usually end up screwing myself looking for the "best deal" !! How did you ID the parts not being Moog? Are they stamped? I still have another 5-7 days before the parts arrive..... i hope .. i hope .. i hope ... __________________ Rich 1972 K5 Blazer CST Click HERE D60 BIG BRAKE UPGRADE Click HERE

10-07-2003, 11:41 AM	#8
boraxman Keepin an eye out Join Date: Feb 2003 Location: So.Cal Posts: 3,921	Hopefully you have better luck than me. Be sure to check everything as soon as you get it. I waited till I was ready to install and then found out. They were Moog parts, just two different ones. __________________ 1970 Chevy C10 SWB 5.3 1996 Toyota Tacoma SR5 4x4 2007 Vespa GTS 250 Scooter ZIP 91351

10-08-2003, 10:21 PM	#9
loweredd www.loweredd.com Join Date: Aug 2002 Location: Struble IA Posts: 808	We sell MOOG at work. If you buy over 4 parts, you get a 10% discount. I bet I beat all others prices.

10-08-2003, 10:23 PM	#10
loweredd www.loweredd.com Join Date: Aug 2002 Location: Struble IA Posts: 808	dang it I wish I got comission. LOL. I love selling parts to people for cheap. I only wish when I called other places, they wouldn't hose me.

10-09-2003, 12:18 AM	#12
loweredd www.loweredd.com Join Date: Aug 2002 Location: Struble IA Posts: 808	hehehehehe

10-09-2003, 12:25 AM	#13
mcmlxix Collector of Projects Join Date: Apr 2003 Location: Las Vegas Posts: 3,106	Well I already placed my order so DONT tell me if you can get them cheaper .... .... __________________ Rich 1972 K5 Blazer CST Click HERE D60 BIG BRAKE UPGRADE Click HERE

10-09-2003, 10:45 AM	#14
loweredd www.loweredd.com Join Date: Aug 2002 Location: Struble IA Posts: 808	ROFL, OK.

10-09-2003, 03:03 PM	#15
Canada20 Registered User Join Date: Jun 2001 Location: Calgary, Alberta, Canada Posts: 802	so what does "improved design" refer to in the patrs mentioned above? Improved how? Greg __________________ No such thing as a stupid question, right?

10-15-2003, 12:49 PM	#16
cwilli84 1FINE69 Join Date: Aug 2003 Location: Detroit, Michigan Posts: 239	Mother truckers has a complete set from Moog also. Good stuff and great service. __________________ Had a 69 swb fleetside 350zz3 w 400turbo trans oak lined bed with rhino coated sides red exterior. SOLD



Register or Log In To remove these advertisements.

10-21-2003, 08:54 PM	#17
Linus0014 Guest Posts: n/a	edelbrock makes a set of adjusters that look pretty nice to me. Attached Images

10-21-2003, 09:00 PM	#18
boraxman Keepin an eye out Join Date: Feb 2003 Location: So.Cal Posts: 3,921	Does anyone know if the Moog ball joints are prelubed? Seems like theres some lube but do they need more? __________________ 1970 Chevy C10 SWB 5.3 1996 Toyota Tacoma SR5 4x4 2007 Vespa GTS 250 Scooter ZIP 91351

10-21-2003, 11:00 PM	#19
loweredd www.loweredd.com Join Date: Aug 2002 Location: Struble IA Posts: 808	you need to "top them off" with grease when you get them all installed. The lube that's in there is mainly to stiffle rust as it sits on the shelf.

Register or Log In To remove these advertisements.