Polyester Primer Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mosel70 · 04-01-2018, 10:22 AM

Giving my '70 Chevy C10 a full repaint, int and ext.

I'm using Eastwood's Contour Polyester Primer-Surfacer. Mostly over sanded OEM paint, but a few small spots of bondo and bare metal and a few new parts (hood, front fenders, tail gate) .
https://www.eastwood.com/eastwood-co...-surfacer.html

I used 2 gallons of primer, 2.5 tip, 20oz primer, 1oz hardener, 3 oz acetone, 80 degrees, 15% humidity. Sprayed on nice. But, I ran out of primer before giving everything its first coat.

2 questions
a. will it hurt to give panels their second coat a week after the first coat dried?

b. should I sand the first coat before applying the second coat of primer?

04-01-2018, 10:22 AM	#1
mosel70 Registered User Join Date: Jul 2016 Location: Las Vegas, NV Posts: 116	Polyester Primer Question Giving my '70 Chevy C10 a full repaint, int and ext. I'm using Eastwood's Contour Polyester Primer-Surfacer. Mostly over sanded OEM paint, but a few small spots of bondo and bare metal and a few new parts (hood, front fenders, tail gate) . https://www.eastwood.com/eastwood-co...-surfacer.html I used 2 gallons of primer, 2.5 tip, 20oz primer, 1oz hardener, 3 oz acetone, 80 degrees, 15% humidity. Sprayed on nice. But, I ran out of primer before giving everything its first coat. 2 questions a. will it hurt to give panels their second coat a week after the first coat dried? b. should I sand the first coat before applying the second coat of primer?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.