1973 GMC Sierra parting out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**RPOZ11** · 01-10-2009, 07:30 PM

Some parts left; its rolling.

1.00 to whatever depending upon what you are looking for.

Is an A/C truck.

Kinda used hard but parts are there.

PM or post yours needs here.

Thanx!

bigblock73 · 01-10-2009, 09:37 PM

If it has the sport rear bumper, I would be interested in the brackets.

I am also interested in the front bumper brackets.

Can you post a few pics of the truck?

**RPOZ11** · 01-10-2009, 09:41 PM

Quote:

Originally Posted by bigblock73

If it has the sport rear bumper, I would be interested in the brackets.

I am also interested in the front bumper brackets.

Can you post a few pics of the truck?

Hi!

No sport bumper but I think it has that heavy step unit out the back we typically see.

On the front brackets, I should have those bolted to the bumper I pulled from it.

Be patient as I have it stored about 45 minutes from here and will need to go take pics of it.

bigblock73 · 01-10-2009, 09:49 PM

Bummer about the rear bumper, but if pics are possible...that would be great. There are other parts I may be interested in, just need to see the truck first.

**RPOZ11** · 01-10-2009, 09:58 PM

I dont think I have ever seen a sport rear for the early 73 era trucks.

Got a pic of one???

I have the 72 units for the rears; are they alike in appearance???

This thing is a roller.

I pulled the 454 & TH400 from it and what's left is the cab with whatever is left to pick from.

The bed is there bad badly beaten, so thats a loss.

Interior stuff probably and some A/C stuff I suppose.

Core support.

Fenders werent too great but I guess could be used.

Might have a nice hood from it + an extra hood as well if I remember correctly.

There's a 14-bolt in the back.

Good for parts before it goes off to the metal scrapper!

Conundrum · 01-10-2009, 10:46 PM

What about the grill?

**RPOZ11** · 01-10-2009, 10:49 PM

Quote:

Originally Posted by Conundrum

What about the grill?

Actually, I have the one from it and a spare one I believe that is nice.

kevinr1970 · 01-11-2009, 12:08 AM

Cab trim? With GMC emblems?

Walts_restoration · 01-11-2009, 05:20 AM

grille and motor mount stands, if con passes on the grille, and if you dont plan on reusing the motor stands.

**N2TRUX** · 01-11-2009, 11:33 AM

Please post prices per forum rules.

Conundrum · 01-11-2009, 08:36 PM

Could I get some pics?

pokethesmot · 01-11-2009, 10:14 PM

do you have a gas cap

**RPOZ11** · 01-11-2009, 10:39 PM

Quote:

Originally Posted by N2TRUX

Please post prices per forum rules.

It's a whole truck, so should I post as pieces are asked for.

I dont know what some will need.

Willing to follow the rules!

bigblock73 · 01-11-2009, 11:18 PM

List a few things you know the truck has that are sellable , and a price for them...that should be acceptable and follow the forum rules.

Here is a pic of the sport bumper on my 73.

**RPOZ11** · 01-12-2009, 01:25 AM

Quote:

Originally Posted by Walts_restoration

grille and motor mount stands, if con passes on the grille, and if you dont plan on reusing the motor stands.

Motor stand that bolt to the frame: $20.00

**RPOZ11** · 01-12-2009, 01:25 AM

Quote:

Originally Posted by kevinr1970

Cab trim? With GMC emblems?

Let me see if they are still there.

I will be at this truck sometime this week.

$20.00

**RPOZ11** · 01-12-2009, 01:27 AM

Quote:

Originally Posted by Conundrum

What about the grill?

Conundrum has first dibs on the grills.

$75.00 each.

One I am sure is really good the other probably just a runner.

**RPOZ11** · 01-12-2009, 01:28 AM

Rolling frame as is: $75.00
and whatever else is still mounted to it.

This is located in SoCal.

Misc items left over are 10.00 to 20.00

Walts_restoration · 01-12-2009, 01:53 AM

454 frame towers right? were they the same as 2wd or 4wd? if you dont know ill find out. And can that be 20 shipped to 66049?

**RPOZ11** · 01-12-2009, 01:55 AM

Quote:

Originally Posted by Walts_restoration

454 frame towers right? were they the same as 2wd or 4wd? if you dont know ill find out. And can that be 20 shipped to 66049?

I am unaware that they were different from SBC ones.

I was under the idea that GM changed it in the rubber motor mount design and not the frame stands like they had in 71 and 72 respectively!

I thought that the 73 and up's were the same frame stand.

If so, I will have to go and look first before I can correctly answer this!

**RPOZ11** · 01-12-2009, 01:59 AM

Quote:

Originally Posted by bigblock73

List a few things you know the truck has that are sellable , and a price for them...that should be acceptable and follow the forum rules.

Here is a pic of the sport bumper on my 73.

Nice!

Looks like the suburban unit to me, but I get it!

I don't have that bumper; only the heavy rear dealer unit.

Are the frame brackets to this bumper different than the suburban ones????

Walts_restoration · 01-12-2009, 02:24 AM

you dont happen to won an rpoz11 do you? just noticed your username. In my dads time, he knew of one motor and one car. both dissapeared about ten years back. One of the guys had a cracked head off it, they kept blowing a headgasket when they ran the motor in the guys track car, me and my dad talked to the guy a few years back and last he knew it was on a hedgerow, then gone. Crazy cars in theri day.

And yes, from what i understand the framestands are different going to a bigblock, if not i dont need them. Ill search myself.

**RPOZ11** · 01-12-2009, 02:35 AM

Quote:

Originally Posted by Walts_restoration

And yes, from what i understand the framestands are different going to a bigblock, if not i dont need them. Ill search myself.

I understand!!!

I will research this and post a reply directly on this for you!!!

**RPOZ11** · 01-12-2009, 02:37 AM

Quote:

Originally Posted by Walts_restoration

you dont happen to won an rpoz11 do you? .

There are 2 GM RPO: Z11's

1 was the 409 Impala / Biscayne cars
1 was the RPO: Z11 used for the Camaro PaceCars

I own the latter

VN Built L34 M20 #'s matching

**RPOZ11** · 01-14-2009, 05:13 PM

Pics

01-10-2009, 07:30 PM	#1
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	1973 GMC Sierra parting out Some parts left; its rolling. 1.00 to whatever depending upon what you are looking for. Is an A/C truck. Kinda used hard but parts are there. PM or post yours needs here. Thanx! __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS

01-10-2009, 09:37 PM	#2
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Re: 1973 GMC Sierra parting out If it has the sport rear bumper, I would be interested in the brackets. I am also interested in the front bumper brackets. Can you post a few pics of the truck? __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

01-10-2009, 09:49 PM	#4
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Re: 1973 GMC Sierra parting out Bummer about the rear bumper, but if pics are possible...that would be great. There are other parts I may be interested in, just need to see the truck first. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

01-10-2009, 09:58 PM	#5
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	Re: 1973 GMC Sierra parting out I dont think I have ever seen a sport rear for the early 73 era trucks. Got a pic of one??? I have the 72 units for the rears; are they alike in appearance??? This thing is a roller. I pulled the 454 & TH400 from it and what's left is the cab with whatever is left to pick from. The bed is there bad badly beaten, so thats a loss. Interior stuff probably and some A/C stuff I suppose. Core support. Fenders werent too great but I guess could be used. Might have a nice hood from it + an extra hood as well if I remember correctly. There's a 14-bolt in the back. Good for parts before it goes off to the metal scrapper! __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS

01-10-2009, 10:46 PM	#6
Conundrum Registered User Join Date: Oct 2008 Location: Parsons, KS Posts: 652	Re: 1973 GMC Sierra parting out What about the grill? __________________ 74 GMC SWB Project "Sin-thia" Static Dropped 8"f/10"r http://67-72chevytrucks.com/vboard/s...d.php?t=460030 97 GMC reg cab short bed, 4.3V6 / 5spd, daily driver 220,000 miles, all stock for now

01-11-2009, 12:08 AM	#8
kevinr1970 Senior Member Join Date: Aug 2004 Location: Everett, WA Posts: 2,316	Re: 1973 GMC Sierra parting out Cab trim? With GMC emblems? __________________ 2009 Honda Fit CfC (bsf 44.9 mpg) 2000 Tahoe Limited 1991 GMC CrewCab Dually 2wd, will end up swb, not dually and replace CCswb below 1991 GMC CrewCab Dually 4x4, just going to fix things up for now 1982/1989 K5/GMC Jimmy 2wd 1987 GMC 1/2 ton swb 2wd Crew (sold)

01-11-2009, 05:20 AM	#9
Walts_restoration Real Projects never die Join Date: Jan 2007 Location: Lawrence, kansas Posts: 1,508	Re: 1973 GMC Sierra parting out grille and motor mount stands, if con passes on the grille, and if you dont plan on reusing the motor stands. __________________ Ill put it this way, ive got a few lawn ornaments My name tag says Ryan KansasTwister On other forums

01-11-2009, 11:33 AM	#10
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: 1973 GMC Sierra parting out Please post prices per forum rules. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

01-11-2009, 08:36 PM	#11
Conundrum Registered User Join Date: Oct 2008 Location: Parsons, KS Posts: 652	Re: 1973 GMC Sierra parting out Could I get some pics? __________________ 74 GMC SWB Project "Sin-thia" Static Dropped 8"f/10"r http://67-72chevytrucks.com/vboard/s...d.php?t=460030 97 GMC reg cab short bed, 4.3V6 / 5spd, daily driver 220,000 miles, all stock for now

01-11-2009, 10:14 PM	#12
pokethesmot profeshinaly unimployed Join Date: Dec 2008 Location: hazlehurst, GA Posts: 1,232	Re: 1973 GMC Sierra parting out do you have a gas cap __________________ my ride click here my myspace "having mud flaps is like asking for a smaller trophy"

01-11-2009, 11:18 PM	#14
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Re: 1973 GMC Sierra parting out List a few things you know the truck has that are sellable , and a price for them...that should be acceptable and follow the forum rules. Here is a pic of the sport bumper on my 73. Attached Images __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale Last edited by bigblock73; 01-11-2009 at 11:19 PM.

01-12-2009, 01:28 AM	#18
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	Re: 1973 GMC Sierra parting out Rolling frame as is: $75.00 and whatever else is still mounted to it. This is located in SoCal. Misc items left over are 10.00 to 20.00 __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS

01-12-2009, 01:53 AM	#19
Walts_restoration Real Projects never die Join Date: Jan 2007 Location: Lawrence, kansas Posts: 1,508	Re: 1973 GMC Sierra parting out 454 frame towers right? were they the same as 2wd or 4wd? if you dont know ill find out. And can that be 20 shipped to 66049? __________________ Ill put it this way, ive got a few lawn ornaments My name tag says Ryan KansasTwister On other forums

01-12-2009, 02:24 AM	#22
Walts_restoration Real Projects never die Join Date: Jan 2007 Location: Lawrence, kansas Posts: 1,508	Re: 1973 GMC Sierra parting out you dont happen to won an rpoz11 do you? just noticed your username. In my dads time, he knew of one motor and one car. both dissapeared about ten years back. One of the guys had a cracked head off it, they kept blowing a headgasket when they ran the motor in the guys track car, me and my dad talked to the guy a few years back and last he knew it was on a hedgerow, then gone. Crazy cars in theri day. And yes, from what i understand the framestands are different going to a bigblock, if not i dont need them. Ill search myself. __________________ Ill put it this way, ive got a few lawn ornaments My name tag says Ryan KansasTwister On other forums Last edited by Walts_restoration; 01-12-2009 at 02:24 AM.

01-14-2009, 05:13 PM	#25
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	Re: 1973 GMC Sierra parting out Pics __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.