Board members mini meet - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68C15 · 02-03-2009, 07:29 AM

Quote:

Originally Posted by 71swb4x4

now I have a one-ton to tow with. Ready to hit the road Todd? Where are we going this time?

remember that yellow tandem axle we saw?

haulnrat · 02-03-2009, 10:03 PM

Leon,

Let me know when you have one of those Iowa mini-meets again. I wouldn't mind showing up and meeting some of the other people on this sight. The '72 burb is my daily and if the weather is nice I will bring the red/white short box.

Thanks

**LockDoc** · 02-04-2009, 12:39 AM

Quote:

Originally Posted by haulnrat

Leon,

Let me know when you have one of those Iowa mini-meets again. I wouldn't mind showing up and meeting some of the other people on this sight. The '72 burb is my daily and if the weather is nice I will bring the red/white short box.

Thanks

I will certainly do that. I plan on having a "meet & greet" at my place this spring. A meet & greet is just a one day informal get together and is a good place to meet members and have time to visit.

LockDoc

**70C10Toejam** · 02-05-2009, 09:48 PM

All that build up, and it turns out to be a pretty uneventfull trip.

I was comming back from the greater Omaha area in the '92 GMC 1500 I used to have at work with 2-2000lb batteries on a car trailer and lost the ground for the trailer brakes. That was a fun ride back. Not as much weight as that dumptruck, but still a blast.

68C10---I got the perfect idea for that dump truck. Turn it into a flatbed carrier. You know those roll-off container trucks that have a big "J" hook that hooks to to the container behind the cab? A forklift dealer in town converted one of those to a flatbed. They lay the whole bed on the ground, drive the forklift onto it and then lift the front and retract/drive back underneath the the bed. No need to try to get it up some ramps.

**tkeduk8r** · 02-06-2009, 06:04 PM

wow... I pulled my one ton home too, but it was SUMMER and I had a 3/4 ext bcab 98 chevy WITH trailer brakes... BUT YET still got 6 mpg!!! Glad you guys made it home and now I know I have one less potential buyer for my 68 c30 when I ma done with it... I highly recommend one of those 1 ton dumps... dont know how I got by before without it!!! Shawn, keep us posted on the build of it!!!
--Mike

71swb4x4 · 02-06-2009, 08:34 PM

Hey Mike, I didn't start my post with "I am the smartest man in the world."

This trip could easily qualify as a "What not to do" trip.
I spent a few minutes on the truck today and will start a thread later.

Leon - let me know when you have a meet. I would love to head out that way again, this time in a more comfortable vehicle. If you plan it around something else that's happening that would be a bonus too. Like a swap meet, races, a quilt show for Todd, or a burnout contest in Newton.

**LockDoc** · 02-07-2009, 12:36 AM

Quote:

Originally Posted by 71swb4x4

Hey Mike, I didn't start my post with "I am the smartest man in the world."

This trip could easily qualify as a "What not to do" trip.
I spent a few minutes on the truck today and will start a thread later.

Leon - let me know when you have a meet. I would love to head out that way again, this time in a more comfortable vehicle. If you plan it around something else that's happening that would be a bonus too. Like a swap meet, races, a quilt show for Todd, or a burnout contest in Newton.

It will be good to see a thread on the truck. I will post it up when I come up with a date for a get together. Todd could take in the quilting bee at the local nursing home while he's here.... He'd be a shoe in for the Quilter Queen trophy.

Everyone knows they don't make smoke in Newton they just blow it....

LockDoc

68C15 · 02-07-2009, 07:45 AM

HEY!!!! what's with the quilting buzz? I prefer crocheting instead. it keeps me busy while I am driving. LOL

I am actually thinking of taking my bike to the DM area this summer. any ride-a-longs?

but then again if there is a swap meet we could take Shawn's dually. then on the way back we could get that yellow C50 tandem axle dumper we saw. JK

edit; on Sept. 20 there is a drag day at the airport in Estherville, according to Green Machine. I would like to take my truck to that.

**tkeduk8r** · 02-07-2009, 04:04 PM

GM sent me the same invite I think that will be a good time and Im gonna try like he** to make it happen... looking forward to your post Shawn, might inspire me to do the cab corners and rockers on my 1ton...
--Mike

Bob 68327 · 02-07-2009, 05:30 PM

Quote:

Originally Posted by LockDoc

It will be good to see a thread on the truck. I will post it up when I come up with a date for a get together. Todd could take in the quilting bee at the local nursing home while he's here.... He'd be a shoe in for the Quilter Queen trophy.

Everyone knows they don't make smoke in Newton they just blow it....

LockDoc

We just blow smoke huh !

Bob 68327 · 02-07-2009, 05:33 PM

Quote:

Originally Posted by 68C15

HEY!!!! what's with the quilting buzz? I prefer crocheting instead. it keeps me busy while I am driving. LOL

I am actually thinking of taking my bike to the DM area this summer. any ride-a-longs?

but then again if there is a swap meet we could take Shawn's dually. then on the way back we could get that yellow C50 tandem axle dumper we saw. JK

edit; on Sept. 20 there is a drag day at the airport in Estherville, according to Green Machine. I would like to take my truck to that.

They have Street legal drags @ Iowa speedway about every week also . I don't have the dates for this year yet last year it was on Friday nights . Maybe you could crochet me a blanket

Bob

**Louisvillekytruck** · 01-16-2024, 04:58 PM

Looked like a great time

jumpsoffrock · 01-16-2024, 06:45 PM

heh, you bumped a thread from ~15 years ago.

Wonder what ever became of the C30

**Louisvillekytruck** · 01-16-2024, 06:57 PM

Quote:

Originally Posted by jumpsoffrock

heh, you bumped a thread from ~15 years ago.

Wonder what ever became of the C30

Sorry I just saw this today

**LockDoc** · 01-17-2024, 01:31 AM

-
I just wanted to poke those guys is why I posted it in the birthday thread.....

Hey, it's still a good read and a lesson on what not to do....

Oh, and yes we did have a good time, and good food.

Wow, I didn't even notice I just passed 25,000 posts. I will have to post it in GD.

LockDoc

**special-K** · 01-17-2024, 09:08 AM

Nothing ever wrong with pulling up an way back post. That's why they all remain. In the parts forums, that's another story for obvious reasons. Check the date when searching up parts. I especially enjoy seeing "people" threads pilled up from the past. Many here we don't see anymore and it's great to be reminded of them. Plus.... there was a time when gatherings of members was fairly often around the country. It seems things have changed. Maybe it's the newness of forums wearing off. In the early days it was great to find out about others with the same interest in trucks in your region you would otherwise never known about. Maybe we take that for granted or maybe so many are into these trucks now it's not such a novelty to know others share the interest. I don't know, but here in Maryland we had some gatherings. I had a few here. I don't think any of those guys are even on here anymore.

Husker · 01-17-2024, 11:08 AM

Nice old post
Ron

**LockDoc** · 01-17-2024, 11:26 AM

Quote:

Originally Posted by Husker

I have met ToeJam, nice guy. Very cool meet up.
Ron

Yep, Chad is a nice guy and has an all original looking '70 driver. He hasn't been on the board since 2016. I have his number, I will have to give him a call....

68Gold/white · 01-17-2024, 11:41 AM

Leon,
Maybe this could happen again???
If you had a gathering around the 4th of July, I might be able to attend!!!
Jeff

**LockDoc** · 01-17-2024, 12:52 PM

Quote:

Originally Posted by 68Gold/white

Leon,
Maybe this could happen again???
If you had a gathering around the 4th of July, I might be able to attend!!!
Jeff

Something like that might be doable. I will have to check the calendar. We have a family get together around the 4th every year but it is just a one day thing.

68Gold/white · 01-26-2024, 12:01 PM

Leon,
The 4th this year is on a Thursday.
I have a family deal too. Maybe the weekend of 13th and 14th...?
Pick a day when most can come...I can take off any time.
Thanks, however this works out!!!
I need an excuse to visit Iowa!!!
Jeff

**LockDoc** · 01-26-2024, 02:00 PM

Quote:

Originally Posted by 68Gold/white

Leon,
The 4th this year is on a Thursday.
I have a family deal too. Maybe the weekend of 13th and 14th...?
Pick a day when most can come...I can take off any time.
Thanks, however this works out!!!
I need an excuse to visit Iowa!!!
Jeff

I will check with Pat and see what she is planning for the 4th next summer.
.

67C10Step · 01-26-2024, 02:49 PM

Leon,
Dang it! I totally forgot you were in Montezuma, IA. I just got back yesterday from three days in Marshalltown. Next time I am heading up that way I will have to reach out in advance and see what you have going on.

**LockDoc** · 01-26-2024, 11:55 PM

Quote:

Originally Posted by 67C10Step

Leon,
Dang it! I totally forgot you were in Montezuma, IA. I just got back yesterday from three days in Marshalltown. Next time I am heading up that way I will have to reach out in advance and see what you have going on.

For sure let me know. I will PM you my phone number.

**MikeB** · 01-27-2024, 02:11 PM

Pretty cool, man! We could probably get at least 20 guys in North Texas. Maybe I should try to set it up. We have a Buc-ee's north of Fort Worth near Texas Motor Speedway that would be perfect. No restaurant, but they do make deli and BBQ sandwiches. And I would shoot for springtime!

02-03-2009, 10:03 PM	#27
haulnrat Registered User Join Date: Oct 2005 Location: Iowa Posts: 136	Re: Board members mini meet Leon, Let me know when you have one of those Iowa mini-meets again. I wouldn't mind showing up and meeting some of the other people on this sight. The '72 burb is my daily and if the weather is nice I will bring the red/white short box. Thanks

02-05-2009, 09:48 PM	#29
70C10Toejam Hellasick Join Date: Jul 2006 Location: Death Moans, IA Posts: 876	Re: Board members mini meet All that build up, and it turns out to be a pretty uneventfull trip. I was comming back from the greater Omaha area in the '92 GMC 1500 I used to have at work with 2-2000lb batteries on a car trailer and lost the ground for the trailer brakes. That was a fun ride back. Not as much weight as that dumptruck, but still a blast. 68C10---I got the perfect idea for that dump truck. Turn it into a flatbed carrier. You know those roll-off container trucks that have a big "J" hook that hooks to to the container behind the cab? A forklift dealer in town converted one of those to a flatbed. They lay the whole bed on the ground, drive the forklift onto it and then lift the front and retract/drive back underneath the the bed. No need to try to get it up some ramps. __________________ I keep two MAGNUMS in my desk. One's a gun, and I keep it loaded. The other's a bottle and it keeps ME loaded. I'm Tracer Bullet. (Calvin and Hobbes) This life was a test. It was only a test. If this had been an actual life, you would have received instructions on where to go and what to do. RED meat is not bad for you...FUZZY BLUE/GREEN MEAT is bad for you!!!!!!!!!!!!! BUILT FORD TOUGH WITH CHEVY STUFF--sticker at Goodguys

02-06-2009, 06:04 PM	#30
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Board members mini meet wow... I pulled my one ton home too, but it was SUMMER and I had a 3/4 ext bcab 98 chevy WITH trailer brakes... BUT YET still got 6 mpg!!! Glad you guys made it home and now I know I have one less potential buyer for my 68 c30 when I ma done with it... I highly recommend one of those 1 ton dumps... dont know how I got by before without it!!! Shawn, keep us posted on the build of it!!! --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

02-06-2009, 08:34 PM	#31
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: Board members mini meet Hey Mike, I didn't start my post with "I am the smartest man in the world." This trip could easily qualify as a "What not to do" trip. I spent a few minutes on the truck today and will start a thread later. Leon - let me know when you have a meet. I would love to head out that way again, this time in a more comfortable vehicle. If you plan it around something else that's happening that would be a bonus too. Like a swap meet, races, a quilt show for Todd, or a burnout contest in Newton. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

02-07-2009, 07:45 AM	#33
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	Re: Board members mini meet HEY!!!! what's with the quilting buzz? I prefer crocheting instead. it keeps me busy while I am driving. LOL I am actually thinking of taking my bike to the DM area this summer. any ride-a-longs? but then again if there is a swap meet we could take Shawn's dually. then on the way back we could get that yellow C50 tandem axle dumper we saw. JK edit; on Sept. 20 there is a drag day at the airport in Estherville, according to Green Machine. I would like to take my truck to that. Last edited by 68C15; 02-07-2009 at 07:47 AM.

02-07-2009, 04:04 PM	#34
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Board members mini meet GM sent me the same invite I think that will be a good time and Im gonna try like he** to make it happen... looking forward to your post Shawn, might inspire me to do the cab corners and rockers on my 1ton... --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

01-16-2024, 04:58 PM	#37
Louisvillekytruck Senior Member Join Date: Jun 2019 Location: Louisville ky Posts: 1,206	Re: Board members mini meet Looked like a great time

01-16-2024, 06:45 PM	#38
jumpsoffrock Registered User Join Date: Apr 2014 Location: California Posts: 921	Re: Board members mini meet heh, you bumped a thread from ~15 years ago. Wonder what ever became of the C30

01-17-2024, 01:31 AM	#40
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,331	Re: Board members mini meet - I just wanted to poke those guys is why I posted it in the birthday thread..... Hey, it's still a good read and a lesson on what not to do.... Oh, and yes we did have a good time, and good food. Wow, I didn't even notice I just passed 25,000 posts. I will have to post it in GD. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 01-17-2024 at 01:56 AM.

01-17-2024, 09:08 AM	#41
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Board members mini meet Nothing ever wrong with pulling up an way back post. That's why they all remain. In the parts forums, that's another story for obvious reasons. Check the date when searching up parts. I especially enjoy seeing "people" threads pilled up from the past. Many here we don't see anymore and it's great to be reminded of them. Plus.... there was a time when gatherings of members was fairly often around the country. It seems things have changed. Maybe it's the newness of forums wearing off. In the early days it was great to find out about others with the same interest in trucks in your region you would otherwise never known about. Maybe we take that for granted or maybe so many are into these trucks now it's not such a novelty to know others share the interest. I don't know, but here in Maryland we had some gatherings. I had a few here. I don't think any of those guys are even on here anymore. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-17-2024, 11:08 AM	#42
Husker Registered User Join Date: Dec 1999 Location: Mid NE USA Posts: 2,212	Re: Board members mini meet Nice old post Ron

01-17-2024, 11:41 AM	#44
68Gold/white Registered User Join Date: Sep 2011 Location: Ark City, Kansas Posts: 3,280	Re: Board members mini meet Leon, Maybe this could happen again??? If you had a gathering around the 4th of July, I might be able to attend!!! Jeff

01-26-2024, 12:01 PM	#46
68Gold/white Registered User Join Date: Sep 2011 Location: Ark City, Kansas Posts: 3,280	Re: Board members mini meet Leon, The 4th this year is on a Thursday. I have a family deal too. Maybe the weekend of 13th and 14th...? Pick a day when most can come...I can take off any time. Thanks, however this works out!!! I need an excuse to visit Iowa!!! Jeff

01-26-2024, 02:49 PM	#48
67C10Step Registered User Join Date: Jul 2019 Location: Beebe, AR Posts: 2,407	Re: Board members mini meet Leon, Dang it! I totally forgot you were in Montezuma, IA. I just got back yesterday from three days in Marshalltown. Next time I am heading up that way I will have to reach out in advance and see what you have going on. __________________ 1967 C10 1980 Jeep CJ5 2020 Toyota 4Runner 2020 Toyota CH-R 2020 Acura MDX

01-27-2024, 02:11 PM	#50
MikeB Senior Member Join Date: Jul 2000 Location: North Texas Posts: 3,425	Re: Board members mini meet Pretty cool, man! We could probably get at least 20 guys in North Texas. Maybe I should try to set it up. We have a Buc-ee's north of Fort Worth near Texas Motor Speedway that would be perfect. No restaurant, but they do make deli and BBQ sandwiches. And I would shoot for springtime! __________________ Mike 1969 C10 LWB -- owned for 34 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 23 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.