Project Penicillin~ 68 crewcab build up! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rokcrln · 02-12-2006, 12:33 PM

The body mounts are removed and re-adjusted for a correct fit. If the frame is the same width all you have to do is re-locate them for the proper cab to body allignment.

From start to finish it was about 10-12hrs.

Kevin

SLIMJIM · 02-12-2006, 01:12 PM

Very nice work.

SLIMJIM

Long Roof · 02-12-2006, 09:42 PM

I will be keeping an eye on this one. I have a spare burb just sitting waiting for a crew cab treatment.

Keep the updates coming!

Aaron

Rokcrln · 02-12-2006, 09:47 PM

Well I only spent a few hours working on it today and most of that involved a cut off wheel! Looks like we are heading in the 4th door direction. After looking at options to fix the rear cab corner correctly I ended up cutting off the skin and finding tons more rust. After a bit of looking I think the 4th door will not be as hard as most people think. extd56 is looking for some more parts and we will put to gether a doner list of pieces.

Kevin

red71cheyenne · 02-13-2006, 12:01 AM

Kevin, more great work! Thanks for giving us the pics and updates. How do you weld your rockers on? Do you weld around the edges, or do you use pilot holes and fill weld? Thanks, Jeff.

Rokcrln · 02-13-2006, 12:53 AM

Quote:

Originally Posted by red71cheyenne

Kevin, more great work! Thanks for giving us the pics and updates. How do you weld your rockers on? Do you weld around the edges, or do you use pilot holes and fill weld? Thanks, Jeff.

Depends on how bad the structure is to begain with. This one was so bad in the front I welded everything solid for more suport. The rear was plug welded to the jamb and the threashold was also plug welded. If the front had been in good shape and ONLY needed a rocker cover I would just plug/spot weld it. Hope that answers your question.

Kevin

*SOMAD* · 02-13-2006, 09:39 AM

Looking good man its good to see others repairing stuff correctly instead of just covering rust up with new panels. Nice work man and on that 4th door u should be able to use a left door and just shorten it and use a door post outta truck in the rear and then just fab the center post,but im sure u got that figured out seeing the great work u do. THUMBSUP

**Yukon Jack** · 02-13-2006, 11:14 AM

I've said it before, you do awesome work! Incredible to see how much you get done in such short time.

red71cheyenne · 02-13-2006, 12:59 PM

That was what I was wondering. I am using plug/spot welding on mine and just wondered if you went the same route. Your welds are so good I can't see them. Mine aren't quite that good.

Thanks, Jeff.

72CREWCAB · 02-13-2006, 11:57 PM

Awsome work, Kevin! Love to watch a master at work, and still have the time to document so well! Should be awsome when finished. I'll be following closely. Jamie.

HuggerCST · 02-14-2006, 11:30 AM

It's funny that I just found this thead. I have been thinking about building myself a 4 door truck like this in the future as a daily driver, and found a suburban just last night, lol. Looks like someone is telling me to do it!. I'd be interested in seeing pics of how/where the rear panel was added on.

extd56 · 02-14-2006, 07:45 PM

Here are a few pictures of the donor truck that I found for the cab parts that Kevin needed.

LUV2XCLR8 · 02-14-2006, 08:25 PM

bojoe · 02-14-2006, 09:46 PM

Lookin sweet. Looks like the back window would have been a challenge to roll up and down with all the rust in the roller jam. It will be a head turner when you get it done, no doubt.

Rokcrln · 02-15-2006, 07:44 AM

So now if you have to work on Prez day it is double time right

Looks like I will get to have a busy four day week end!

Kevin

krue · 02-15-2006, 08:08 AM

Excellent job, both the metal work and the thread on it.

**Palf70Step** · 02-15-2006, 01:23 PM

Love watching your threads. Keeps me motivated on mine.

Rokcrln · 02-15-2006, 11:24 PM

Quote:

Originally Posted by Palf70Step

Love watching your threads. Keeps me motivated on mine.

Heck mine is sitting in the corner collecting dust as I am working on everyone elses. But I am getting motivated to finish mine, sell it and start a real wild project idea I have

More pics to come, I will be working on extd56's project over the long weekend and should get quite a bit of stuff roughed in. I will be starting to smooth the running boards Thursday night

Kevin

extd56 · 02-15-2006, 11:42 PM

I got the donor cab all cleaned up and unbolted from the frame, its ready to do its part to help out the crewcab.

Vince Putt · 02-16-2006, 11:41 PM

I'd like to see some pictures of the rear floor. I'm curious how much of the floor had to be notched to clear the frame rails. I'm thinking of using a 85 SWB frame under my 67 standard cab but the frame kicks up under the seat area on the 85 and the 67 frame kicks up after the cab requiring the notch.

Were the mounting brackets relocated on the frame to match the locations of the cab? If you could take some pictures of the bottom side it would be very helpful to me.

Rokcrln · 02-16-2006, 11:53 PM

Here are some shot of teh body notch for the newer frame. Yes all the body mounts were relocated and bolted in as needed to keep things mostly lined up.

Note: This was done by the P/O not by me!

Kevin

sixty8c10 · 02-17-2006, 07:25 AM

looking good

Rokcrln · 02-18-2006, 11:01 AM

Quote:

Originally Posted by SOMAD

Looking good man its good to see others repairing stuff correctly instead of just covering rust up with new panels. Nice work man and on that 4th door u should be able to use a left door and just shorten it and use a door post outta truck in the rear and then just fab the center post,but im sure u got that figured out seeing the great work u do. THUMBSUP

Thanks~ The PO liked fiber glass as a rust repair! I will be doing the 4th door in that direction you mentioned but take a close look at your B post on your burb. The owner wants the same door to door look on the drivers side as the passenger side. The pass side has different hinge placement on the second door as well as a diferent strike place and location on the pass front then the drivers side has for hinge clearance. I have started to fab the new post and door opening and by monday I should have some pics to post. It has tuned out to not be as simple as we first thought but it is very doable and will be a great addition once finished!

Kevin

70short/step · 02-18-2006, 11:44 AM

You do Awsome work! And very informative too. Love watching the build of this. You Rock!

rockinlocks · 02-18-2006, 12:34 PM

im curious to know the demensions for that inner rocker panel? im gonna need to make some as well.
thanks!

02-12-2006, 12:33 PM	#26
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Project Penicillin~ 68 crewcab build up! The body mounts are removed and re-adjusted for a correct fit. If the frame is the same width all you have to do is re-locate them for the proper cab to body allignment. From start to finish it was about 10-12hrs. Kevin

02-12-2006, 01:12 PM	#27
SLIMJIM Registered User Join Date: Sep 2005 Location: Charleston, South Carolina Posts: 285	Re: Project Penicillin~ 68 crewcab build up! Very nice work. SLIMJIM __________________ 1970 Chevrolet Blazer 2 wheel drive - SOLD

02-12-2006, 09:42 PM	#28
Long Roof Old School, New Style Join Date: Jun 2005 Location: Monroeville, Ohio Posts: 790	Re: Project Penicillin~ 68 crewcab build up! I will be keeping an eye on this one. I have a spare burb just sitting waiting for a crew cab treatment. Keep the updates coming! Aaron __________________ The Good: - 72 GMC Jimmy 4x4 - 307 cid / 350 th - 70 Chevy Suburban 1/2T 2wd - 454 cid /400 th - 96 Chevy Impala SS - mainly stock - 98 Chevy Tahoe LT 4x4 - all stock The Bad: - 86 Chevy Suburban 1/2T 4x4 - winter beater The Ugly: - 72 Chevy Suburban 1/2T 2wd - parts truck

02-12-2006, 09:47 PM	#29
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Project Penicillin~ 68 crewcab build up! Well I only spent a few hours working on it today and most of that involved a cut off wheel! Looks like we are heading in the 4th door direction. After looking at options to fix the rear cab corner correctly I ended up cutting off the skin and finding tons more rust. After a bit of looking I think the 4th door will not be as hard as most people think. extd56 is looking for some more parts and we will put to gether a doner list of pieces. Kevin Attached Images

02-13-2006, 12:01 AM	#30
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: Project Penicillin~ 68 crewcab build up! Kevin, more great work! Thanks for giving us the pics and updates. How do you weld your rockers on? Do you weld around the edges, or do you use pilot holes and fill weld? Thanks, Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

02-13-2006, 09:39 AM	#32
SOMAD Account Suspended Join Date: Dec 2005 Location: sallis,MS Posts: 47	Re: Project Penicillin~ 68 crewcab build up! Looking good man its good to see others repairing stuff correctly instead of just covering rust up with new panels. Nice work man and on that 4th door u should be able to use a left door and just shorten it and use a door post outta truck in the rear and then just fab the center post,but im sure u got that figured out seeing the great work u do. THUMBSUP

02-13-2006, 11:14 AM	#33
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Re: Project Penicillin~ 68 crewcab build up! I've said it before, you do awesome work! Incredible to see how much you get done in such short time. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

02-13-2006, 12:59 PM	#34
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: Project Penicillin~ 68 crewcab build up! That was what I was wondering. I am using plug/spot welding on mine and just wondered if you went the same route. Your welds are so good I can't see them. Mine aren't quite that good. Thanks, Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

02-13-2006, 11:57 PM	#35
72CREWCAB Registered User Join Date: May 2002 Location: homer ak Posts: 149	Re: Project Penicillin~ 68 crewcab build up! Awsome work, Kevin! Love to watch a master at work, and still have the time to document so well! Should be awsome when finished. I'll be following closely. Jamie.

02-14-2006, 11:30 AM	#36
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: Project Penicillin~ 68 crewcab build up! It's funny that I just found this thead. I have been thinking about building myself a 4 door truck like this in the future as a daily driver, and found a suburban just last night, lol. Looks like someone is telling me to do it!. I'd be interested in seeing pics of how/where the rear panel was added on. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

02-14-2006, 07:45 PM	#37
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: Project Penicillin~ 68 crewcab build up! Here are a few pictures of the donor truck that I found for the cab parts that Kevin needed. Attached Images Last edited by extd56; 02-14-2006 at 07:46 PM.

02-14-2006, 08:25 PM	#38
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	Re: Project Penicillin~ 68 crewcab build up! __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

02-14-2006, 09:46 PM	#39
bojoe Registered User Join Date: Dec 2005 Location: Benton, IL Posts: 95	Re: Project Penicillin~ 68 crewcab build up! Lookin sweet. Looks like the back window would have been a challenge to roll up and down with all the rust in the roller jam. It will be a head turner when you get it done, no doubt. __________________ 1985 GMC 1/2 ton 305/700R4 1975 Chevrolet 1/2 ton 350/350 1971 Chevrolet C-60 427/5+2 1981 Cadillac Deville 6.0/368cid 2003 Chevrolet Suburban(wife's ride) 2007 Peterbilt 379/How I make money More old John Deere tractors than I know what to do with.

02-15-2006, 07:44 AM	#40
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Project Penicillin~ 68 crewcab build up! So now if you have to work on Prez day it is double time right Looks like I will get to have a busy four day week end! Kevin

02-15-2006, 08:08 AM	#41
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: Project Penicillin~ 68 crewcab build up! Excellent job, both the metal work and the thread on it. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"



Register or Log In To remove these advertisements.

02-15-2006, 01:23 PM	#42
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,640	Re: Project Penicillin~ 68 crewcab build up! Love watching your threads. Keeps me motivated on mine. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

02-15-2006, 11:42 PM	#44
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: Project Penicillin~ 68 crewcab build up! I got the donor cab all cleaned up and unbolted from the frame, its ready to do its part to help out the crewcab.

02-16-2006, 11:41 PM	#45
Vince Putt Hippy Join Date: Sep 2004 Location: kaska, pa Posts: 95	Re: Project Penicillin~ 68 crewcab build up! I'd like to see some pictures of the rear floor. I'm curious how much of the floor had to be notched to clear the frame rails. I'm thinking of using a 85 SWB frame under my 67 standard cab but the frame kicks up under the seat area on the 85 and the 67 frame kicks up after the cab requiring the notch. Were the mounting brackets relocated on the frame to match the locations of the cab? If you could take some pictures of the bottom side it would be very helpful to me.

02-16-2006, 11:53 PM	#46
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Project Penicillin~ 68 crewcab build up! Here are some shot of teh body notch for the newer frame. Yes all the body mounts were relocated and bolted in as needed to keep things mostly lined up. Note: This was done by the P/O not by me! Kevin Attached Images

02-17-2006, 07:25 AM	#47
sixty8c10 MY EX DRIVES A BROOM Join Date: Nov 2003 Location: Herington, KS Posts: 869	Re: Project Penicillin~ 68 crewcab build up! looking good __________________ They say nobody's perfect. I'm a nobody, so I must be perfect. Building Nemo -1968 C10 Long Bed FRED -1947 KB-2 International

02-18-2006, 11:44 AM	#49
70short/step Registered User Join Date: Dec 2003 Location: Stockton, CA Posts: 1,579	Re: Project Penicillin~ 68 crewcab build up! You do Awsome work! And very informative too. Love watching the build of this. You Rock! __________________ For every person with a spark of genius, There are a hundred with ignition trouble. 70 Short/Step

02-18-2006, 12:34 PM	#50
rockinlocks Registered User Join Date: Nov 2005 Location: Maple Ridge B.C. Posts: 20	Re: Project Penicillin~ 68 crewcab build up! im curious to know the demensions for that inner rocker panel? im gonna need to make some as well. thanks!

Register or Log In To remove these advertisements.