My '69 Chevelle/Winston cup car - The 1947 - Present Chevrolet & GMC Truck Message Board Network

884x4Sub · 04-03-2009, 11:07 AM

had this car in the mid 80s.....LOVED IT!.....had cut springs (no such thing as drop spindles in those days) I had the bodyshop cut out and move the fenderlips higher like a stock car....had 275/50/15 T/As on all corners....built 350 4 gear.....slid off the road in a freak Sept snowstorm and basically totalled the car.....always said I wanted to do it again

884x4Sub · 04-03-2009, 11:12 AM

last year I drove all the way to Mooresville NC and picked up this ex Cup/Arca '99 Monte carlo

884x4Sub · 04-03-2009, 11:22 AM

Im going to cut the body off the racecar and I have this '69 Chevelle and Im going to put that body on the racecar chassis and make a track and later a street car out of it.....

Im less than a half an hour from Mosport Park roadrace track......I want to take it out and do some track days with it....also my friend owns a 1/3 mi paved oval and i want to take it out there also and have at 'er.....

884x4Sub · 04-03-2009, 11:36 AM

I have a 300hp 350 that I'll put in the car to get it up and running.....once that is done we'll look fot the big hp "Bullet" prob somewhere between 5 and 600 hp.

Im getting at it in the garage......its really not that dark..must be the camera settings

imagine the last pic of the Nova as a 69 Chevelle and thats the look and stance Im going after.......

Frizzle Fry · 04-03-2009, 07:35 PM

Dude, that is Bad@ss! It would be cool to build some flares over those, but the "open" look is wicked too.

msgross · 04-03-2009, 08:05 PM

very cool project... put some turn signals on it and make it street legal!

OARNGESI · 04-03-2009, 08:32 PM

Cool project

884x4Sub · 08-16-2010, 01:01 AM

some updates....got the chevelle body on the racecar chassis now....the last pic shows how low the car is compared to my Montana

67ChevyRedneck · 08-16-2010, 02:14 AM

Holy crap that's awesome!

screamin_c10 · 08-16-2010, 02:39 AM

That is sick!

CSGAS · 08-16-2010, 03:13 AM

Makes me wish I still had my 68 Malibu...then again, I wish that a lot

cdowns · 08-16-2010, 07:05 AM

i remember back in the early 70's bobby allison used to run one of those in the modified/sportsman classes on the east coast// i'll look thru my pics and see if i still have a pic of his at langhorne

884x4Sub · 08-16-2010, 09:06 AM

Quote:

Originally Posted by cdowns

i remember back in the early 70's bobby allison used to run one of those in the modified/sportsman classes on the east coast// i'll look thru my pics and see if i still have a pic of his at langhorne

this one?...
thanks for the kudos btw guys....!

cdowns · 08-16-2010, 09:58 AM

that's it but never looked that great when he was racin it. i seem to remember alot of scrapped paint and his front bumper always seemed a bit beatup

nomrlz · 08-16-2010, 01:33 PM

that is a cool project. nice to see sumptin being built differing from the trends

**LEEVON** · 08-16-2010, 03:22 PM

I got your paint job.

Shake and Bake!

67ChevyRedneck · 08-16-2010, 03:27 PM

I hate what they did to that poor car. It looked killer! Of course, movies use several cars and the "Hero" car stays "pristine."

884x4Sub · 08-16-2010, 03:53 PM

Afew more pics, the brakes are Wilwood GT6000's and the exhaust is from a Hooters Cup car.

VA72C10 · 08-16-2010, 04:09 PM

awesome project!

**FRENCHBLUE72** · 08-23-2010, 09:57 AM

That is a gonna be a fun ride when she is done..

sleepertruck72 · 08-26-2010, 09:34 PM

That ride looks killer

djinva · 08-26-2010, 09:43 PM

I love your car, it reminds me of the 70 Monte Carlo in the opeing scene in Fast & Furious-Toyko Drift.

383Ram · 08-29-2010, 08:43 AM

This is cool on soooo many levels.

Get out in the garage and get at it, we need to see this one done---and soon.

jb1016 · 08-29-2010, 10:43 PM

Subscribed. Awesome project. And we should all be lucky enough to have a friend with a personal racetrack!

884x4Sub · 09-15-2010, 12:28 AM

hey thanks for all the replies.....should have known a bunch of truck guys would "get it" !.....in the last pics the body is just sitting on the chassis.....next order of business is to take the body to the media blasters and have the roof and some specific areas blasted, I'll go for a "driver paint job" as opposed to a "show winning paint job" I intend to drive the heck out of this car

I also need to freshen up the underside of the car (wire wheel/ prime/paint) then take the rolling chassis (only) to Peter Gibbons's race shop about 45 min from here and have him put what amounts to a road race set up in the car as opposed to the oval set up it has now so it can turn left AND right lol

I'll keep you guys posted thanks Doug

04-03-2009, 11:07 AM	#1
884x4Sub p p pullin' Join Date: Apr 2008 Location: oshawa ontario Posts: 373	My '69 Chevelle/Winston cup car had this car in the mid 80s.....LOVED IT!.....had cut springs (no such thing as drop spindles in those days) I had the bodyshop cut out and move the fenderlips higher like a stock car....had 275/50/15 T/As on all corners....built 350 4 gear.....slid off the road in a freak Sept snowstorm and basically totalled the car.....always said I wanted to do it again Attached Images __________________ doug

04-03-2009, 11:12 AM	#2
884x4Sub p p pullin' Join Date: Apr 2008 Location: oshawa ontario Posts: 373	Re: My '69 Chevelle/Winston cup car last year I drove all the way to Mooresville NC and picked up this ex Cup/Arca '99 Monte carlo Attached Images __________________ doug

04-03-2009, 11:22 AM	#3
884x4Sub p p pullin' Join Date: Apr 2008 Location: oshawa ontario Posts: 373	Re: My '69 Chevelle/Winston cup car Im going to cut the body off the racecar and I have this '69 Chevelle and Im going to put that body on the racecar chassis and make a track and later a street car out of it..... Im less than a half an hour from Mosport Park roadrace track......I want to take it out and do some track days with it....also my friend owns a 1/3 mi paved oval and i want to take it out there also and have at 'er..... Attached Images __________________ doug

04-03-2009, 11:36 AM	#4
884x4Sub p p pullin' Join Date: Apr 2008 Location: oshawa ontario Posts: 373	Re: My '69 Chevelle/Winston cup car I have a 300hp 350 that I'll put in the car to get it up and running.....once that is done we'll look fot the big hp "Bullet" prob somewhere between 5 and 600 hp. Im getting at it in the garage......its really not that dark..must be the camera settings imagine the last pic of the Nova as a 69 Chevelle and thats the look and stance Im going after....... Attached Images __________________ doug

04-03-2009, 07:35 PM	#5
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: My '69 Chevelle/Winston cup car Dude, that is Bad@ss! It would be cool to build some flares over those, but the "open" look is wicked too.

04-03-2009, 08:05 PM	#6
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: My '69 Chevelle/Winston cup car very cool project... put some turn signals on it and make it street legal! __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

04-03-2009, 08:32 PM	#7
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: My '69 Chevelle/Winston cup car Cool project __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

08-16-2010, 01:01 AM	#8
884x4Sub p p pullin' Join Date: Apr 2008 Location: oshawa ontario Posts: 373	Re: My '69 Chevelle/Winston cup car some updates....got the chevelle body on the racecar chassis now....the last pic shows how low the car is compared to my Montana Attached Images __________________ doug

08-16-2010, 02:14 AM	#9
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: My '69 Chevelle/Winston cup car Holy crap that's awesome! __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

08-16-2010, 02:39 AM	#10
screamin_c10 I dun gradjiated collij!!! Join Date: Jan 2006 Location: St. Helens Oregon Posts: 1,750	Re: My '69 Chevelle/Winston cup car That is sick! __________________ Built NOT Bought. Viper Red 1971 LWB C10 355 Vortec W/700R4 4/5 drop AKA Screamin' You are missed! 2006 F150 XLT 5.4L Triton Rollin' on 22s the "F1" 67 C20 PS/AC/327/TH400 we call 'er "Bessie" 67 Malibu PS/ZR1-LS1 Brakes/350 Vortec/700R4 2/2 drop on 18" 338s - Tracy's "Boo" Boosted '67 Cougar EFI 5.0 HO roller motor/T5/8.8 Tracloc/ 4 wheel disks - "Project Panther" 79 Honda Z50 - stretched, cafe'd and hotrodded 125CC Lifan/5spd FEAR THE MONKEY!

08-16-2010, 03:13 AM	#11
CSGAS optomistic ah-so Join Date: Mar 2009 Location: Charlotte, NC Posts: 544	Re: My '69 Chevelle/Winston cup car Makes me wish I still had my 68 Malibu...then again, I wish that a lot __________________ Rubbing is Racin' Ribbing is Bench Racin' 1970 C-10 lwb Fleetside. Originally 350 2-bbl 3-on-the-tree, m/b, m/w, m/s no a/c. Currently running on a '76 Camaro 305.

08-16-2010, 07:05 AM	#12
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: My '69 Chevelle/Winston cup car i remember back in the early 70's bobby allison used to run one of those in the modified/sportsman classes on the east coast// i'll look thru my pics and see if i still have a pic of his at langhorne __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

08-16-2010, 09:58 AM	#14
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: My '69 Chevelle/Winston cup car that's it but never looked that great when he was racin it. i seem to remember alot of scrapped paint and his front bumper always seemed a bit beatup __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

08-16-2010, 01:33 PM	#15
nomrlz Registered User Join Date: Jan 2010 Location: Wataga,IL Posts: 666	Re: My '69 Chevelle/Winston cup car that is a cool project. nice to see sumptin being built differing from the trends

08-16-2010, 03:22 PM	#16
LEEVON Registered User Join Date: Jul 2006 Location: Ozark, MO Posts: 4,887	Re: My '69 Chevelle/Winston cup car I got your paint job. Shake and Bake! __________________ '20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids



Register or Log In To remove these advertisements.

08-16-2010, 03:27 PM	#17
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: My '69 Chevelle/Winston cup car I hate what they did to that poor car. It looked killer! Of course, movies use several cars and the "Hero" car stays "pristine." __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

08-16-2010, 03:53 PM	#18
884x4Sub p p pullin' Join Date: Apr 2008 Location: oshawa ontario Posts: 373	Re: My '69 Chevelle/Winston cup car Afew more pics, the brakes are Wilwood GT6000's and the exhaust is from a Hooters Cup car. Attached Images __________________ doug

08-16-2010, 04:09 PM	#19
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: My '69 Chevelle/Winston cup car awesome project! __________________ Looking for a 67-72 swb or blazer project in or around VA.

08-23-2010, 09:57 AM	#20
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,589	Re: My '69 Chevelle/Winston cup car That is a gonna be a fun ride when she is done.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

08-26-2010, 09:34 PM	#21
sleepertruck72 Registered User Join Date: Nov 2007 Location: Turlock California 95380 Posts: 2,075	Re: My '69 Chevelle/Winston cup car That ride looks killer __________________ 72 C20 Longbed 05 1500 Z71

08-26-2010, 09:43 PM	#22
djinva Registered User Join Date: Jan 2010 Location: Dublin VA Posts: 168	Re: My '69 Chevelle/Winston cup car I love your car, it reminds me of the 70 Monte Carlo in the opeing scene in Fast & Furious-Toyko Drift.

08-29-2010, 08:43 AM	#23
383Ram Registered User Join Date: Apr 2009 Location: Truckville, The Capital of NY Posts: 217	Re: My '69 Chevelle/Winston cup car This is cool on soooo many levels. Get out in the garage and get at it, we need to see this one done---and soon. __________________ . 454/4 speed, '85 Dodge Ram hybrid build in progress 454, PP heads, Dual 500 CFM cabs, 'Vette manifolds. First time out---spinning for half track Slooowww build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=348050 Engine build thread at: http://www.chevelles.com/forums/showthread.php?t=326289 Last edited by 383Ram; 08-29-2010 at 08:43 AM.

09-15-2010, 12:28 AM	#25
884x4Sub p p pullin' Join Date: Apr 2008 Location: oshawa ontario Posts: 373	Re: My '69 Chevelle/Winston cup car hey thanks for all the replies.....should have known a bunch of truck guys would "get it" !.....in the last pics the body is just sitting on the chassis.....next order of business is to take the body to the media blasters and have the roof and some specific areas blasted, I'll go for a "driver paint job" as opposed to a "show winning paint job" I intend to drive the heck out of this car I also need to freshen up the underside of the car (wire wheel/ prime/paint) then take the rolling chassis (only) to Peter Gibbons's race shop about 45 min from here and have him put what amounts to a road race set up in the car as opposed to the oval set up it has now so it can turn left AND right lol I'll keep you guys posted thanks Doug __________________ doug Last edited by 884x4Sub; 09-15-2010 at 12:29 AM.

Register or Log In To remove these advertisements.