My Facetruck thread. - Page 141 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 01-30-2023, 08:23 AM

I saw a temperature map and it showed the cold scooting across the US hanging north to pass above us, except further south along the Appalachians and your mountain ranges. We will getting a big dip in the jet stream this week to 'cool' things off a bit. I hope that misses you all.

**GOPAPA** · 01-30-2023, 10:31 AM

Larry Did you go with TGI's for floor joist ? Last job I used them on was my nephews house and he wasnt to sure about them until I got them in place with all the centering parts and the 1-1/8th Plywood on top of them.. could drive a car on it ,, now its OSB not quite as strong ,, but way cheaper.. as for metal studs . .I wouldnt want them in my house because if you ever had a fire ..it all will fall down .

**davischevy** · 02-09-2023, 11:42 PM

I finally put upholstery in the trunk of my 55.

**special-K** · 02-10-2023, 07:29 AM

Nice finishing touch. Is this local custom work? I'm a sucker for roll & pleat. My '67 interior will be done that way, in black.

**davischevy** · 02-21-2023, 10:53 PM

Quote:

Originally Posted by special-K

Nice finishing touch. Is this local custom work? I'm a sucker for roll & pleat. My '67 interior will be done that way, in black.

It came from TMI. The little woman bought it for me for Christmas.

**davischevy** · 02-21-2023, 10:57 PM

We have walls, now waiting for roof trusses.

**3757chevy** · 02-21-2023, 10:58 PM

Quote:

Originally Posted by davischevy

I finally put upholstery in the trunk of my 55.

Quote:

Originally Posted by davischevy

It came from TMI. The little woman bought it for me for Christmas.

Very nice.

my56chevytruck · 02-22-2023, 08:38 AM

Quote:

Originally Posted by davischevy

We have walls, now waiting for roof trusses.

looks like a good size house, where's the shop going to be??

**special-K** · 02-22-2023, 09:13 AM

Yeehaw! I can see that place is going to set back in there real nice with it's surroundings

**davischevy** · 02-22-2023, 01:33 PM

Quote:

Originally Posted by my56chevytruck

looks like a good size house, where's the shop going to be??

Right where I was standing when I took the picture. I plan to start it soon. I'm still counting my pennies to see what I can afford.

**special-K** · 02-22-2023, 06:59 PM

I thought you were going to say same place as it's been, but I shoulda known you had one planned out your door, and a short walk

**davischevy** · 02-28-2023, 11:27 PM

We are building a new field house at the school. After school my grandson came out and asked if we had something he could do.

Killer Bee · 02-28-2023, 11:48 PM

looking good on the sheepfoot!

**davischevy** · 02-28-2023, 11:56 PM

Quote:

Originally Posted by Killer Bee

looking good on the sheepfoot!

Much better than a video game.

**Chevyland** · 03-01-2023, 12:12 AM

Quote:

Originally Posted by davischevy

We are building a new field house at the school. After school my grandson came out and asked if we had something he could do.

Love it…
Keep that boy engaged
Before
All us w….(Radio edit)’ Old’ boys
Become‘extinct’’’’
.
.
.
Edit

**special-K** · 03-01-2023, 07:56 AM

What? You let him play before doing his homework??

That picture is priceless!

Killer Bee · 03-01-2023, 08:02 AM

Quote:

Originally Posted by davischevy

Much better than a video game.

your wisdom spanning two generations is commendable - hats off to you my friend!

**davischevy** · 03-01-2023, 09:02 PM

Quote:

Originally Posted by Killer Bee

your wisdom spanning two generations is commendable - hats off to you my friend!

That boys dad is driving a Chevrolet 2500 HD with a 6.0. They were pulling a trailer and the dad mumbled "this thing won't pull at all.". The boy said "Well, it sounds like it's trying."

**special-K** · 03-01-2023, 09:29 PM

The wisdom of youth

Killer Bee · 03-01-2023, 10:33 PM

that kid's talented and optimistic!

**GOPAPA** · 03-02-2023, 10:22 AM

I bet the other boys and girls in this school with your grandson sure wish they had a grandpa like you. I can see that in your family every one gets to learn equipment when young including you Larry ..Right?

**davischevy** · 03-02-2023, 12:09 PM

Quote:

Originally Posted by GOPAPA

I bet the other boys and girls in this school with your grandson sure wish they had a grandpa like you. I can see that in your family every one gets to learn equipment when young including you Larry ..Right?

It wasn't very safe when I was learning. I look back at some of the things that I survived and it was only by the Grace of God that I'm still here.

**72 tigger** · 03-02-2023, 09:48 PM

Quote:

Originally Posted by davischevy

It wasn't very safe when I was learning. I look back at some of the things that I survived and it was only by the Grace of God that I'm still here.

Glad you survived! I’m sure it was a steep learning curve

Is he wearing a seatbelt?

**davischevy** · 03-02-2023, 10:19 PM

Quote:

Originally Posted by 72 tigger

Glad you survived! I’m sure it was a steep learning curve

Is he wearing a seatbelt?

Yes.

**Advanced Design** · 03-05-2023, 10:17 AM

Your new home looks large and I am sure it will be beautiful, Larry. Would you mind sharing any drawings of what you are building?

It was 3 years ago right now we were building our new house. We had an excellent contractor who made the process fun and pretty easy for us. I am guessing you have an excellent contractor too….

01-30-2023, 08:23 AM	#3501
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: My Facetruck thread. I saw a temperature map and it showed the cold scooting across the US hanging north to pass above us, except further south along the Appalachians and your mountain ranges. We will getting a big dip in the jet stream this week to 'cool' things off a bit. I hope that misses you all. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-30-2023, 10:31 AM	#3502
GOPAPA "Tail Gate Best Seat In House" Join Date: Oct 2007 Location: Nampa Idaho Posts: 7,357	Re: My Facetruck thread. Larry Did you go with TGI's for floor joist ? Last job I used them on was my nephews house and he wasnt to sure about them until I got them in place with all the centering parts and the 1-1/8th Plywood on top of them.. could drive a car on it ,, now its OSB not quite as strong ,, but way cheaper.. as for metal studs . .I wouldnt want them in my house because if you ever had a fire ..it all will fall down . __________________ When you learn a thing a day you store up smart.

02-09-2023, 11:42 PM	#3503
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,790	Re: My Facetruck thread. I finally put upholstery in the trunk of my 55. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

02-10-2023, 07:29 AM	#3504
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: My Facetruck thread. Nice finishing touch. Is this local custom work? I'm a sucker for roll & pleat. My '67 interior will be done that way, in black. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-21-2023, 10:57 PM	#3506
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,790	Re: My Facetruck thread. We have walls, now waiting for roof trusses. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

02-22-2023, 09:13 AM	#3509
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: My Facetruck thread. Yeehaw! I can see that place is going to set back in there real nice with it's surroundings __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-22-2023, 06:59 PM	#3511
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: My Facetruck thread. I thought you were going to say same place as it's been, but I shoulda known you had one planned out your door, and a short walk __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-28-2023, 11:27 PM	#3512
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,790	Re: My Facetruck thread. We are building a new field house at the school. After school my grandson came out and asked if we had something he could do. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

02-28-2023, 11:48 PM	#3513
Killer Bee Registered User Join Date: Jan 2016 Location: Barber City, CA Posts: 4,729	Re: My Facetruck thread. looking good on the sheepfoot! __________________ *I started out with nothing - and I still have most of it*

03-01-2023, 07:56 AM	#3516
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: My Facetruck thread. What? You let him play before doing his homework?? That picture is priceless! __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 03-01-2023 at 08:01 AM.

03-01-2023, 09:29 PM	#3519
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: My Facetruck thread. The wisdom of youth __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-01-2023, 10:33 PM	#3520
Killer Bee Registered User Join Date: Jan 2016 Location: Barber City, CA Posts: 4,729	Re: My Facetruck thread. that kid's talented and optimistic! __________________ *I started out with nothing - and I still have most of it*

03-02-2023, 10:22 AM	#3521
GOPAPA "Tail Gate Best Seat In House" Join Date: Oct 2007 Location: Nampa Idaho Posts: 7,357	Re: My Facetruck thread. I bet the other boys and girls in this school with your grandson sure wish they had a grandpa like you. I can see that in your family every one gets to learn equipment when young including you Larry ..Right? __________________ When you learn a thing a day you store up smart.

03-05-2023, 10:17 AM	#3525
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,017	Re: My Facetruck thread. Your new home looks large and I am sure it will be beautiful, Larry. Would you mind sharing any drawings of what you are building? It was 3 years ago right now we were building our new house. We had an excellent contractor who made the process fun and pretty easy for us. I am guessing you have an excellent contractor too…. __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.