'49 chevy with s-10

[rollinrooster]

Originally Posted by youngrodder

My rims are 20 x 10 with a BS of 4". I should have explained that it was the outside edge of the tire that would have hit the edge of the fender. It my be the 3/4" that made a difference.

Here is a pic.

I also have a 4 link so I'm not concerned as I don't have any side to side movement.

Marc

Marc,

What gas tank did you go with?

[xpickup]

rollinrooster, your frame is looking great. Keep up the great work.

Shannon

[youngrodder]

Originally Posted by rollinrooster

Marc,

What gas tank did you go with?

Rooster-

I don't recall. My frame uses a modified G-body frame and I looked through catalogs to find something from a G-body that had the correct filler location. I had to cut the filler neck down. Mine fills from behind the license plate. I also sent the tank out Rockvalley and had a fuel pump retrofitted inside it. This is because I'm running an LT1.

Thanks
Marc

[eventytoo]

looking good!

Please more info on the brakes and spindles in the front.

Do you plan on running front shocks?

[rollinrooster]

Originally Posted by eventytoo

looking good!

Please more info on the brakes and spindles in the front.

Do you plan on running front shocks?

Thanks... the front end is a kit i got from McGaughys. As for the front shocks i have some brackets that a friend gave me just need to buy shocks and put them on.

[iehotrod]

subscribed

[rollinrooster]

Got some more time to work on the brake lines. Finally finished the frame part. fixn to start on the accuair for the chassis.