spindle help asap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ed70 · 08-01-2012, 03:02 PM

will 90s chevy 2wd spindles work with a 67 chevy? i mean like lining up properly with balljoints and tie rods... i know 71 through 87 trucks will but havent heard anything and cant find anything about 88 and up.

SCOTI · 08-01-2012, 06:01 PM

I haven't ever tried but I doubt it. Someone would have already done it w/these trucks being around for as long as they been.

**lolife99** · 08-01-2012, 06:44 PM

There are some members using the light duty 3/4 ton 88-98 stuff to put 6-lug disc brakes on the 67-87 trucks.
This requires you to run a 3/4-ton (67-87) lower a-arm (larger balljoint hole),... 88-98 upper and lower ball joints,... and 88-98 outer tie rods.

I'm not a proponent of ths swap because the spindle geometry has to be different.
Some members have done it with success.
But I remember one member spending over $600 in parts to make this swap happen.

This info is also used to run 88-98 2wd LIFT spindles,... on the 67-87 trucks.

What is the reason you want to use the '90's spindle?
What is the condition of the front end of your truck?
Adding drop spindles?
5-lug?
6-lug?
What else can you tell us.

08-01-2012, 03:02 PM	#1
ed70 is very serious Join Date: Mar 2009 Location: moscow mills MO Posts: 154	spindle help asap will 90s chevy 2wd spindles work with a 67 chevy? i mean like lining up properly with balljoints and tie rods... i know 71 through 87 trucks will but havent heard anything and cant find anything about 88 and up. __________________ 1967 C-10 2wd fleetside LB 350 4spd (dads) - sold 1970 C-10 2wd fleetside LB 307 700r4 - sold 1969 C-10 2wd fleetside LB 327 3spd - sold 1969 C-10 2wd fleetside LB 350 th350 - sold 1967 C-10 2wd fleetside LB 250 th400 -project in progress Chevrolet=one who is dignified enough to expect every occasion is a special one and sees it fit to wear a bow tie... may others come under dressed.

08-01-2012, 06:01 PM	#2
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,910	Re: spindle help asap I haven't ever tried but I doubt it. Someone would have already done it w/these trucks being around for as long as they been. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

08-01-2012, 06:44 PM	#3
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,682	Re: spindle help asap There are some members using the light duty 3/4 ton 88-98 stuff to put 6-lug disc brakes on the 67-87 trucks. This requires you to run a 3/4-ton (67-87) lower a-arm (larger balljoint hole),... 88-98 upper and lower ball joints,... and 88-98 outer tie rods. I'm not a proponent of ths swap because the spindle geometry has to be different. Some members have done it with success. But I remember one member spending over $600 in parts to make this swap happen. This info is also used to run 88-98 2wd LIFT spindles,... on the 67-87 trucks. What is the reason you want to use the '90's spindle? What is the condition of the front end of your truck? Adding drop spindles? 5-lug? 6-lug? What else can you tell us. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.