CPP Drop Spindle Special - Page 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BigMike608 · 05-14-2013, 01:52 PM

2.5" drop spindles for 87 shipped to 75201

Scottshotrods · 05-14-2013, 02:11 PM

Quote:

Originally Posted by BigMike608

2.5" drop spindles for 87 shipped to 75201

p/m sent

Justin

BBC Motorhead · 05-22-2013, 01:11 PM

Hey Justin, just wondering what a set of 5" rear drop springs for 71 c10 would run me shipped to 58501? Thanks

Scottshotrods · 05-22-2013, 02:29 PM

Quote:

Originally Posted by BBC Motorhead

Hey Justin, just wondering what a set of 5" rear drop springs for 71 c10 would run me shipped to 58501? Thanks

p/m sent

Justin

woodfork1 · 06-27-2013, 07:27 PM

PM me a price for 2 1/2 drop and springs if you have them for a 71 C 10

Scottshotrods · 06-27-2013, 08:45 PM

Quote:

Originally Posted by woodfork1

PM me a price for 2 1/2 drop and springs if you have them for a 71 C 10

p/m sent

Justin

Rusty69 · 06-29-2013, 05:41 PM

Drop spindles for a 69? Has disc brakes up front. May be 71 spindles. Sent to 36092
Posted via Mobile Device

STOCKISH · 06-30-2013, 08:49 PM

Interested in a price for the new style drop spindles that dont increase trac width for a 72 as well as 2" drop front springs, and 6" drop rear springs if possible. Shipping is to 27616

Scottshotrods · 07-01-2013, 10:45 AM

Quote:

Originally Posted by Rusty69

Drop spindles for a 69? Has disc brakes up front. May be 71 spindles. Sent to 36092
Posted via Mobile Device

p/m sent

Justin

Scottshotrods · 07-01-2013, 10:50 AM

Quote:

Originally Posted by 1972SuperCheyenne

Interested in a price for the new style drop spindles that dont increase trac width for a 72 as well as 2" drop front springs, and 6" drop rear springs if possible. Shipping is to 27616

p/m sent

Justin

MUNCH72 · 07-02-2013, 02:00 PM

Could you pm me a price on a set of the new style drop spindles for a 72 shipped to 35630?

Scottshotrods · 07-02-2013, 02:12 PM

Quote:

Originally Posted by MUNCH72

Could you pm me a price on a set of the new style drop spindles for a 72 shipped to 35630?

I was informed by a member this morning that on e-bay you get these dropped spindals for $225.00 and free shipping.

I am sorry we cannot sell them at this price and give free shipping

Justin

MUNCH72 · 07-02-2013, 04:01 PM

Quote:

Originally Posted by Scottshotrods

I was informed by a member this morning that on e-bay you get these dropped spindals for $225.00 and free shipping.

I am sorry we cannot sell them at this price and give free shipping

Justin

What can you sell them for?
Posted via Mobile Device

Scottshotrods · 07-02-2013, 04:19 PM

Quote:

Originally Posted by MUNCH72

What can you sell them for?
Posted via Mobile Device

p/m sent

Justin

70c10stepper · 08-01-2013, 07:55 PM

Can you price a Grand Slam Kit 4/5 drop w/upgraded drilled & slotted rotors & red calipers for a 70 c10 stepside shipped to 38852?

Thanks

**68bowtie** · 10-23-2013, 07:53 PM

pm sent

weircc · 10-28-2013, 10:32 PM

How about camaro parts? 70 a arms black

smallblocks350 · 12-12-2013, 08:15 PM

Can you PM me a price on CPP drop spindles for a 85 GMC C1500 to 72761?

Thank you

C10agent · 03-08-2014, 07:31 PM

Interested in Trac Bar (6572DTBK) and Shock Relocation (6372SRK) shipped to 77868. Thanks, Neil

**michael bustamante** · 03-09-2014, 12:33 PM

You selling 6 lug rotors too? Ship to 87121

Twisted78SS · 10-08-2014, 04:55 PM

Not sure if this was ever put to bed, (didn't read the entire thread again), but I just stumbled on this article which appears to show the amount of change in track width from a stock 72 disc brake truck with typical drop spindles to swapping those with the modular's.

Drop Spindle install

**lolife99** · 10-08-2014, 05:27 PM

This topic should be very easy to answer,... but no one seems to know.
There are 4 different track widths
1) Stock drum brake spindle
2) 71-87 factory disc brake spindle width
3) "standard" style 2.5" and 3" drop spindles
4) CPP Modular spindles

All would be measured from wheel mounting surface on the same truck, or on a fabricated fixture.
No bags.
No different springs.
Same set up used for all measurements.
That would put all the rumors to rest.

harleyhouser · 10-13-2014, 11:39 AM

price for 72 c-10
4/6 drop
modular spindles
shock relocator/ rear
trac bar
drilled/slotted rotors&calipers
shipped to 74764

gringoloco · 08-02-2015, 02:55 AM

Quote:

Originally Posted by lolife99

This topic should be very easy to answer,... but no one seems to know.
There are 4 different track widths
1) Stock drum brake spindle
2) 71-87 factory disc brake spindle width
3) "standard" style 2.5" and 3" drop spindles
4) CPP Modular spindles

All would be measured from wheel mounting surface on the same truck, or on a fabricated fixture.
No bags.
No different springs.
Same set up used for all measurements.
That would put all the rumors to rest.

This would be easy enough if one had each of the spindles on hand. Have a stable fixture for the ball joint holes and a framing square to measure wms. Just a matter of rounding up the spindles; maybe a vendor could do this?

**lolife99** · 08-02-2015, 09:21 AM

Quote:

Originally Posted by gringoloco

This would be easy enough if one had each of the spindles on hand. Have a stable fixture for the ball joint holes and a framing square to measure wms. Just a matter of rounding up the spindles; maybe a vendor could do this?

I 100% agree with you.

You would need:
1) 63-70 stock drum brake assembled spindle.
2) 71-72 stock disc brake assembly
(and maybe the 73-87 version to rule out any differences)
3) 63-70, 71-72, or 73-87 conventional DROP spindle
4) 63-70, 71-72, or 73-87 MODULAR drop spindle from CPP.
(both drop spindles would need to be measured with the same rotor installed)

Any vendors have the ability to do this?

05-14-2013, 01:52 PM	#226
BigMike608 Registered User Join Date: Oct 2010 Location: Dallas, TX Posts: 432	Re: CPP Drop Spindle Special 2.5" drop spindles for 87 shipped to 75201 __________________ 1977 SWB C10 - "Woodson": 5.3 Vortec LS Swap, 4L60e Trans, 4.5/5 drop

05-22-2013, 01:11 PM	#228
BBC Motorhead Registered User Join Date: Nov 2010 Location: Bismarck North Dakota Posts: 71	Re: CPP Drop Spindle Special Hey Justin, just wondering what a set of 5" rear drop springs for 71 c10 would run me shipped to 58501? Thanks

06-27-2013, 07:27 PM	#230
woodfork1 Registered User Join Date: Dec 2012 Location: Houma, LA Posts: 95	Re: CPP Drop Spindle Special PM me a price for 2 1/2 drop and springs if you have them for a 71 C 10

06-29-2013, 05:41 PM	#232
Rusty69 Registered User Join Date: Jun 2013 Location: Wetumpka, al Posts: 76	Re: CPP Drop Spindle Special Drop spindles for a 69? Has disc brakes up front. May be 71 spindles. Sent to 36092 Posted via Mobile Device

06-30-2013, 08:49 PM	#233
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: CPP Drop Spindle Special Interested in a price for the new style drop spindles that dont increase trac width for a 72 as well as 2" drop front springs, and 6" drop rear springs if possible. Shipping is to 27616 __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

07-02-2013, 02:00 PM	#236
MUNCH72 Registered User Join Date: Apr 2013 Location: Florence Al Posts: 36	Re: CPP Drop Spindle Special Could you pm me a price on a set of the new style drop spindles for a 72 shipped to 35630? __________________ Michael

08-01-2013, 07:55 PM	#240
70c10stepper Registered User Join Date: Apr 2013 Location: Iuka, MS Posts: 22	Re: CPP Drop Spindle Special Can you price a Grand Slam Kit 4/5 drop w/upgraded drilled & slotted rotors & red calipers for a 70 c10 stepside shipped to 38852? Thanks

10-23-2013, 07:53 PM	#241
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,360	Re: CPP Drop Spindle Special pm sent __________________ I live in California, but identify as a Texan "If a job's worth doing, it's worth doing well" Project "Little Sister" (70 c10 blue original paint refresh) Project "C10 Fever" (68 factory black 396 swb) Project "Blue Bomb" (70 c30 blue original paint refresh) Project "Vitamin C" (71 c10 orange original paint refresh)

10-28-2013, 10:32 PM	#242
weircc Registered User Join Date: Dec 2008 Location: richmond, MO Posts: 794	Re: CPP Drop Spindle Special How about camaro parts? 70 a arms black __________________ 1971 rs camaro under the knife ls3 6 speed swap 1970 396 big block shorty fleet 67 clone 2010 rs/ss camaro

12-12-2013, 08:15 PM	#243
smallblocks350 Registered User Join Date: Aug 2013 Location: Siloam Springs Posts: 1	Re: CPP Drop Spindle Special Can you PM me a price on CPP drop spindles for a 85 GMC C1500 to 72761? Thank you

03-08-2014, 07:31 PM	#244
C10agent Registered User Join Date: Aug 2013 Location: Navasota, TX Posts: 708	Re: CPP Drop Spindle Special Interested in Trac Bar (6572DTBK) and Shock Relocation (6372SRK) shipped to 77868. Thanks, Neil __________________ Neil............... 1972 C10 SWB - Shop Truck in the Works 5.3 LS / Full Air Ride / Rear Notch 20" American Racing Daytonas IG - neilioustx - pictures of build/progress Born and Raised in the Promised Land.... TEXAS Y'ALL!! Last edited by C10agent; 03-09-2014 at 12:48 PM.

03-09-2014, 12:33 PM	#245
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,814	Re: CPP Drop Spindle Special You selling 6 lug rotors too? Ship to 87121 __________________ 1967custom

10-08-2014, 04:55 PM	#246
Twisted78SS Wide n'Low Join Date: Jan 2007 Location: La Center, WA Posts: 1,511	Re: CPP Drop Spindle Special Not sure if this was ever put to bed, (didn't read the entire thread again), but I just stumbled on this article which appears to show the amount of change in track width from a stock 72 disc brake truck with typical drop spindles to swapping those with the modular's. Drop Spindle install __________________ Trippin Hazard.. 67 swb, Gold Member.. 68 Suburban Air Force Retired

10-08-2014, 05:27 PM	#247
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,682	Re: CPP Drop Spindle Special This topic should be very easy to answer,... but no one seems to know. There are 4 different track widths 1) Stock drum brake spindle 2) 71-87 factory disc brake spindle width 3) "standard" style 2.5" and 3" drop spindles 4) CPP Modular spindles All would be measured from wheel mounting surface on the same truck, or on a fabricated fixture. No bags. No different springs. Same set up used for all measurements. That would put all the rumors to rest. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

10-13-2014, 11:39 AM	#248
harleyhouser Registered User Join Date: Jul 2011 Location: valliant oklahoma Posts: 97	Re: CPP Drop Spindle Special price for 72 c-10 4/6 drop modular spindles shock relocator/ rear trac bar drilled/slotted rotors&calipers shipped to 74764



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.