|
11-17-2011, 12:16 PM
|
#1 |
|
Registered User
Join Date: Oct 2010
Location: Hallsville, MO
Posts: 271
|
4L80 to a NP205
I'd like t install a 4L80 to a NP205. Advanced Adapters makes a kit http://www.advanceadapters.com/products/pn-50-0410/ for $570. Is there any other way to do this? I do not own the 4L80 or NP205 yet, so I can buy any version.
|
|
|
|
11-25-2011, 04:05 AM
|
#2 |
|
Registered User
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
|
Re: 4L80 to a NP205
I know that the 1991 one ton crew cabs have that set up, I have one. But I'm not sure how hard it is to find the stock adapter since as far as I know it was one year only.
__________________
 CHEVY ONLY
|
|
|
|
|
11-25-2011, 05:53 AM
|
#3 |
|
Collector of Projects
Join Date: Apr 2003
Location: Las Vegas
Posts: 3,106
|
Re: 4L80 to a NP205
I'm doing the same thing.... Picked up the rare 1991 NP205 with round pattern and VSS a few months ago and grabbed a 4L80e on Tuesday...
The stock adapter is almost impossible to find. If you do find one its big bucks. There is a universal kit that I found on another site and posted over HERE. It will basically allow you to use any NP205. The only difference on the NP205 will be needing a 32 spline input shaft.... HERE You will need to figure out your own shift lever(s) with the universal kit. North West Fab has a nice cable shift twin stick setup. not cheap but a nice looking part... HERE Here is a link to the original post on the Pirate4x site that has more pictures.... BE WARNED: Only read over there... posting/asking basic questions will get you verbally abused.. CLICK HERE . |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
