NC 1980c-10 part out - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1980c-10 mybaby · 10-10-2011, 03:32 PM

All surface rust nothing through the metal... From what I can gather it's been in NC all it's life
Posted via Mobile Device

bluex · 10-12-2011, 01:48 AM

Ok, sounds good. Lmk when you have it ready and I will come check it out. As long as its straight consider it sold. I'm in no big hurry so don't strip it just for me. I can wait till you get the rest sold....
Posted via Mobile Device

1980c-10 mybaby · 10-12-2011, 07:33 PM

Quote:

Originally Posted by bluex

Ok, sounds good. Lmk when you have it ready and I will come check it out. As long as its straight consider it sold. I'm in no big hurry so don't strip it just for me. I can wait till you get the rest sold....
Posted via Mobile Device

Yeah i should have it all stripped this weekend and than we can go from there

1980c-10 mybaby

1980c-10 mybaby · 10-12-2011, 09:51 PM

lower control arms... uppers are already packed away ready for shipment

hotrod_991 · 10-12-2011, 10:15 PM

ok might have missed it but what are you wanting for all the bushings? You said everything? what is that?

1980c-10 mybaby · 10-12-2011, 11:16 PM

Quote:

Originally Posted by hotrod_991

ok might have missed it but what are you wanting for all the bushings? You said everything? what is that?

ive sold all the separate parts to the energy suspension kit... everything was installed into there respective area and i wouldnt get them out without damaging the product if i would have tried to remove them...

1980c-10 mybaby

Rochlow · 10-12-2011, 11:35 PM

Are the ball joints new and do they come with the castle nuts?
Posted via Mobile Device

1980c-10 mybaby · 10-13-2011, 07:28 AM

Yeah they are new and yeah the nuts will come with
Posted via Mobile Device

trout · 10-23-2011, 09:39 PM

great guy to deal with and very understanding it was good meeting you boss

1980c-10 mybaby · 10-23-2011, 10:10 PM

Quote:

Originally Posted by trout

great guy to deal with and very understanding it was good meeting you boss

thank you... it was great meeting with you and meeting another fellow square body member

turner16 · 10-27-2011, 06:45 AM

do you still have the cab mounts? Shipping to Toronto Canada M1C 2C6
thanks

1980c-10 mybaby · 10-27-2011, 06:52 AM

Quote:

Originally Posted by turner16

do you still have the cab mounts? Shipping to Toronto Canada M1C 2C6
thanks

No sir I don't have them anymore
Posted via Mobile Device

Kutzy · 10-28-2011, 01:19 AM

What rear end is in the truck?

If it's the 12 bolt and you want to sell the differential yoke let me know how much to 88003.

Thanks,
Kutzy

1980c-10 mybaby · 10-28-2011, 04:07 PM

Quote:

Originally Posted by Kutzy

What rear end is in the truck?

If it's the 12 bolt and you want to sell the differential yoke let me know how much to 88003.

Thanks,
Kutzy

im sorry mine is only the 10bolt rear end

1980c-10 mybaby · 11-01-2011, 09:39 PM

ok guys ive still got a lot of parts and they need good homes im willing to work on price to get this stuff gone the town just wrote me a ticket saying i need it gone by the end of the year... i still have

Cab
Bed
Drop shocks (front only)
Hood
Inner Fender Wells
Fenders
Grille Core Support
Headlights
HID wiring
Windshield (taken out of cab for a friend but he doesnt need it anymore)
Rear-End 10 bolt New brake hardware in drums
New rotors and calipers front
OEM dashpad Make offer i will ship if need be

help me out guys i need these things gone and im willing to work on price...

Prices are on first page will go lower from them though

1980c-10 mybaby

**michael bustamante** · 11-07-2011, 05:24 PM

What can you tell me about the fuel tank? Is it 25 or 31 gallon?

1980c-10 mybaby · 11-07-2011, 06:02 PM

Already sold
Posted via Mobile Device

niceandlo · 11-08-2011, 07:31 PM

Interested in the hid harness, the headers and was wondering if you have a WORKING headlight switch as my gauge lights dont work and if you have the heater control face so I can see my heat settings..

Pm me a price shipped to 98074
Posted via Mobile Device

1980c-10 mybaby · 11-09-2011, 12:22 AM

Quote:

Originally Posted by niceandlo

Interested in the hid harness, the headers and was wondering if you have a WORKING headlight switch as my gauge lights dont work and if you have the heater control face so I can see my heat settings..

Pm me a price shipped to 98074
Posted via Mobile Device

i will get pictures tomorrow when the suns out and we can go from there the headers have already been sold but everything else i have

niceandlo · 11-10-2011, 06:46 PM

Pics? Lol
Posted via Mobile Device

1980c-10 mybaby · 11-12-2011, 11:34 AM

Quote:

Originally Posted by niceandlo

Pics? Lol
Posted via Mobile Device

here are the pictures sorry for such a long wait my internet has been terrible lately

niceandlo · 11-12-2011, 12:47 PM

Awesome, the headlight switch does work 100 percent right? I need it for my gauge lights
Posted via Mobile Device

niceandlo · 11-12-2011, 12:48 PM

One last thing, do you have the wiper switch knob?
Posted via Mobile Device

1980c-10 mybaby · 11-12-2011, 04:27 PM

Quote:

Originally Posted by niceandlo

One last thing, do you have the wiper switch knob?
Posted via Mobile Device

it is the coloum but i still do

stockgp · 11-12-2011, 09:36 PM

if you can't sell the cab whole, would you be willing to cut some patch panels?

10-10-2011, 03:32 PM	#76
1980c-10 mybaby Registered User Join Date: Feb 2010 Location: charlotte nc Posts: 302	Re: 1980c-10 part out All surface rust nothing through the metal... From what I can gather it's been in NC all it's life Posted via Mobile Device __________________ 1980c-10 mybaby

10-12-2011, 01:48 AM	#77
bluex Registered User Join Date: Jun 2004 Location: Spartanburg, SC Posts: 1,963	Re: 1980c-10 part out Ok, sounds good. Lmk when you have it ready and I will come check it out. As long as its straight consider it sold. I'm in no big hurry so don't strip it just for me. I can wait till you get the rest sold.... Posted via Mobile Device __________________ Paul '78 GMC Serria 15 Heavy Half. 361/NV3500/3.73. Former LWB NV3500 swap Trailing arm swap '98 ECSB Z71 daily driver -traded '03 burb. Family cruiser http://upstategmtrucks.com/

10-12-2011, 09:51 PM	#79
1980c-10 mybaby Registered User Join Date: Feb 2010 Location: charlotte nc Posts: 302	Re: 1980c-10 part out lower control arms... uppers are already packed away ready for shipment Attached Images __________________ 1980c-10 mybaby

10-12-2011, 10:15 PM	#80
hotrod_991 Registered User Join Date: Jul 2009 Location: Thibodaux, LA Posts: 479	Re: 1980c-10 part out ok might have missed it but what are you wanting for all the bushings? You said everything? what is that? __________________ "Buckle up I wanna try somethin!!" "of course it will hold!, I welded it!" 1977 c10 under knife for full rebuild, 5.3l 4l60e drive rain swap, replacement frame and green repaint

10-12-2011, 11:35 PM	#82
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: 1980c-10 part out Are the ball joints new and do they come with the castle nuts? Posted via Mobile Device

10-13-2011, 07:28 AM	#83
1980c-10 mybaby Registered User Join Date: Feb 2010 Location: charlotte nc Posts: 302	Re: 1980c-10 part out Yeah they are new and yeah the nuts will come with Posted via Mobile Device __________________ 1980c-10 mybaby

10-23-2011, 09:39 PM	#84
trout Registered User Join Date: Jun 2010 Location: lexington, SC Posts: 1,276	Re: 1980c-10 part out great guy to deal with and very understanding it was good meeting you boss __________________ Edited by staff

10-27-2011, 06:45 AM	#86
turner16 Registered User Join Date: Sep 2010 Location: Ajax, Ontario Posts: 214	Re: 1980c-10 part out do you still have the cab mounts? Shipping to Toronto Canada M1C 2C6 thanks

10-28-2011, 01:19 AM	#88
Kutzy Registered User Join Date: Oct 2011 Location: Las Cruces, New Mexico Posts: 29	Re: 1980c-10 part out What rear end is in the truck? If it's the 12 bolt and you want to sell the differential yoke let me know how much to 88003. Thanks, Kutzy __________________ 1980 GMC C10 Pickup - SBC 350/Muncie SM465 A slow work in progress!

11-01-2011, 09:39 PM	#90
1980c-10 mybaby Registered User Join Date: Feb 2010 Location: charlotte nc Posts: 302	Re: 1980c-10 part out ok guys ive still got a lot of parts and they need good homes im willing to work on price to get this stuff gone the town just wrote me a ticket saying i need it gone by the end of the year... i still have Cab Bed Drop shocks (front only) Hood Inner Fender Wells Fenders Grille Core Support Headlights HID wiring Windshield (taken out of cab for a friend but he doesnt need it anymore) Rear-End 10 bolt New brake hardware in drums New rotors and calipers front OEM dashpad Make offer i will ship if need be help me out guys i need these things gone and im willing to work on price... Prices are on first page will go lower from them though 1980c-10 mybaby __________________ 1980c-10 mybaby

11-07-2011, 05:24 PM	#91
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,814	Re: 1980c-10 part out What can you tell me about the fuel tank? Is it 25 or 31 gallon? __________________ 1967custom

11-07-2011, 06:02 PM	#92
1980c-10 mybaby Registered User Join Date: Feb 2010 Location: charlotte nc Posts: 302	Re: 1980c-10 part out Already sold Posted via Mobile Device __________________ 1980c-10 mybaby

11-08-2011, 07:31 PM	#93
niceandlo Registered User Join Date: Nov 2011 Location: Redmond, Washington Posts: 23	Re: 1980c-10 part out Interested in the hid harness, the headers and was wondering if you have a WORKING headlight switch as my gauge lights dont work and if you have the heater control face so I can see my heat settings.. Pm me a price shipped to 98074 Posted via Mobile Device

11-10-2011, 06:46 PM	#95
niceandlo Registered User Join Date: Nov 2011 Location: Redmond, Washington Posts: 23	Re: 1980c-10 part out Pics? Lol Posted via Mobile Device

11-12-2011, 12:47 PM	#97
niceandlo Registered User Join Date: Nov 2011 Location: Redmond, Washington Posts: 23	Re: 1980c-10 part out Awesome, the headlight switch does work 100 percent right? I need it for my gauge lights Posted via Mobile Device



Register or Log In To remove these advertisements.

11-12-2011, 12:48 PM	#98
niceandlo Registered User Join Date: Nov 2011 Location: Redmond, Washington Posts: 23	Re: 1980c-10 part out One last thing, do you have the wiper switch knob? Posted via Mobile Device

11-12-2011, 09:36 PM	#100
stockgp Registered User Join Date: Oct 2011 Location: Steubenville, OH Posts: 28	Re: 1980c-10 part out if you can't sell the cab whole, would you be willing to cut some patch panels?

Register or Log In To remove these advertisements.