Any wheels ideas for 8 lug one ton chevy axle? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LuckyScott · 01-16-2020, 12:03 AM

Looking to get new wheels for a 8 lug axle from a chevy one ton truck.
Any ideas ?

**68bowtie** · 01-16-2020, 01:36 AM

I like 19.5” P30’s. If you’re looking for aftermarket, Vision 181’s.

Name: C7BEADD2-660C-4882-A706-B5604989AC26.jpeg
Views: 275
Size: 32.9 KB

Name: 277017D7-5704-4197-AAD8-E60D90315902.jpeg
Views: 269
Size: 14.3 KB

**special-K** · 01-16-2020, 07:21 AM

Single wheel? What's on front?

Mike C · 01-16-2020, 08:41 AM

My favorite wheel is steel the Alcoa Super Single. I just put my set on my ‘83 crew cab truck. This is the 4th truck they have been on! My ‘70 GMC Sierra Grande, my ‘02 GMC 2500HD, an ‘85 crew cab truck and now the ‘83. And they look good on any year IMO. They are forged as well. If they have anything going against them is you have to polish them every so often.

notsolo · 01-16-2020, 08:58 AM

You are looking to put these on a Blazer?....these are 17 x 10.

01-16-2020, 09:15 AM

I have struggled to find a wheel that i like for my C20. There were some very expensive options but that didn’t work into the budget right now. I bought some wheels on Craigslist that I actually really like.
Let me know what you find.

LuckyScott · 01-16-2020, 12:29 PM

"You are looking to put these on a Blazer?....these are 17 x 10."

I have those exact wheels but they are 16 inch. Not a lot of tires for a 16 inch rim that are not off road.
Where can I get those in 17"?

notsolo · 01-16-2020, 01:55 PM

Don't know where they came from originally, I can sell you these, shipping 3000 miles would be awful.

**Richard** · 01-16-2020, 03:38 PM

If you like the old slot mag style the US Mags Indy U101 Is available in 8 lug 17x10. Just purchased a set from Summit. Oddly US Mags does not have center caps for the wheel. Found some generic 5.12" center caps that fit though.

01-16-2020, 12:03 AM	#1
LuckyScott Registered User Join Date: Jun 2010 Location: Anaheim, Calif. Posts: 361	Any wheels ideas for 8 lug one ton chevy axle? Looking to get new wheels for a 8 lug axle from a chevy one ton truck. Any ideas ?

01-16-2020, 01:36 AM	#2
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,400	Re: Any wheels ideas for 8 lug one ton chevy axle? I like 19.5” P30’s. If you’re looking for aftermarket, Vision 181’s. __________________ I live in California, but identify as a Texan "If a job's worth doing, it's worth doing well" Project "Little Sister" (70 c10 blue original paint refresh) Project "C10 Fever" (68 factory black 396 swb) Project "Blue Bomb" (70 c30 blue original paint refresh) Project "Vitamin C" (71 c10 orange original paint refresh)

01-16-2020, 07:21 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Any wheels ideas for 8 lug one ton chevy axle? Single wheel? What's on front? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-16-2020, 08:41 AM	#4
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,713	Re: Any wheels ideas for 8 lug one ton chevy axle? My favorite wheel is steel the Alcoa Super Single. I just put my set on my ‘83 crew cab truck. This is the 4th truck they have been on! My ‘70 GMC Sierra Grande, my ‘02 GMC 2500HD, an ‘85 crew cab truck and now the ‘83. And they look good on any year IMO. They are forged as well. If they have anything going against them is you have to polish them every so often. __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax

01-16-2020, 08:58 AM	#5
notsolo Registered User Join Date: Apr 2008 Location: Md Posts: 2,451	Re: Any wheels ideas for 8 lug one ton chevy axle? You are looking to put these on a Blazer?....these are 17 x 10. Attached Images __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=635605

01-16-2020, 09:15 AM	#6
letsgofast Guest Posts: n/a	Re: Any wheels ideas for 8 lug one ton chevy axle? I have struggled to find a wheel that i like for my C20. There were some very expensive options but that didn’t work into the budget right now. I bought some wheels on Craigslist that I actually really like. Let me know what you find. Attached Images

01-16-2020, 12:29 PM	#7
LuckyScott Registered User Join Date: Jun 2010 Location: Anaheim, Calif. Posts: 361	Re: Any wheels ideas for 8 lug one ton chevy axle? "You are looking to put these on a Blazer?....these are 17 x 10." I have those exact wheels but they are 16 inch. Not a lot of tires for a 16 inch rim that are not off road. Where can I get those in 17"?

01-16-2020, 01:55 PM	#8
notsolo Registered User Join Date: Apr 2008 Location: Md Posts: 2,451	Re: Any wheels ideas for 8 lug one ton chevy axle? Don't know where they came from originally, I can sell you these, shipping 3000 miles would be awful. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=635605

01-16-2020, 03:38 PM	#9
Richard Senior Member Join Date: Dec 1999 Location: Southern California Posts: 2,705	Re: Any wheels ideas for 8 lug one ton chevy axle? If you like the old slot mag style the US Mags Indy U101 Is available in 8 lug 17x10. Just purchased a set from Summit. Oddly US Mags does not have center caps for the wheel. Found some generic 5.12" center caps that fit though. __________________ Richard 1972 K10 Custom Deluxe SWB Fleetside My build https://67-72chevytrucks.com/vboard/...d.php?t=800746



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.