Slot lovers unite! - Page 12 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 12-23-2015, 12:26 AM

Quote:

Originally Posted by Mapearso

I'll play

From eyeballing them I think I've got 15x7 and 15x8.5 or 9 or maybe even 10?

I just got the truck today so I haven't even had a chance to pull off the wheels

I think those rears are 10", but could be wrong

Quote:

Originally Posted by CG

Excellent thread! If anyone has a pair of 16.5 X 9.75 Chevy 8 lug slots with a 5 inch backspace I would consider taking those off your hands if you asked real nice =)

I'll be on the lookout.

Here is my '72 with 9.75s:

**LockDoc** · 12-23-2015, 12:57 AM

-
Here is a set I had a local guy polish for me. I just haven't decided what I want to put them on yet.... They are all 8.5 x 15

LockDoc

**jocko** · 12-23-2015, 01:08 AM

I could kick myself... Sold my 72 vintage 8 lug slots for $80 a couple years ago to make room in the garage (I needed it though). I miss em, one of the best lookin wheels that can go on these trucks in my book, other than steelies - and even better than steelies in some cases. Well, if the guy I sold em to is somewhere out there, I'd gladly buy them back for $90.

**special-K** · 12-23-2015, 09:55 AM

These are a hot looking, and tough, wheel polished out. But on the right truck, especially 4wds, I prefer them dulled out. Gives them a built for function look, while being undeniably handsome. most custom wheels these days look so frail to me, more like for a car (except so many are yucky black now)

CG · 12-23-2015, 10:22 AM

Quote:

Originally Posted by special-K

These are a hot looking, and tough, wheel polished out. But on the right truck, especially 4wds, I prefer them dulled out. Gives them a built for function look, while being undeniably handsome. most custom wheels these days look so frail to me, more like for a car (except so many are yucky black now)

You know its your fault I got the itch for the 8 luggers again

I had totally written them off ages ago until you told me where I could get 16.5 tires.

If nothing pans out by the time Im ready to deal with tires and wheels Ill be going with 16 inch white steel wheels ... I love that look too.

**68350** · 12-23-2015, 12:34 PM

Here's a few trucks of mine with slots

BluTrukker · 12-23-2015, 12:58 PM

I love my slots, now I need some better tires to compliment them!

ChainGang · 01-08-2016, 12:33 AM

Here is my 1973 Sigman Pitman slots.

CG · 01-08-2016, 12:36 AM

Ugh, not this thread again ... drooool!

cleszkie should post a pic of his blazer. Im just dreaming here

**cericd** · 01-08-2016, 12:39 AM

Quote:

Originally Posted by ChainGang

Here is my 1973 Sigman Pitman slots.

Sweet 70's vibe!

**72gmguy** · 01-08-2016, 08:17 AM

Here is a set on a truck I purchased a few months ago.

Name: image.jpg
Views: 814
Size: 73.3 KB

Jose's 69 · 01-09-2016, 02:32 AM

Has anyone ever painted a set of these?

Voodoo556 · 01-09-2016, 03:46 AM

I've got a set of 4 - 15"x9.75" US Indy Mags 8 lug For sale. Not polished. Have 32 lug nuts as well.
I took them off my '70 k20. Have a potential buyer but if he passes they will be available. No shipping.

Possmguts · 01-09-2016, 11:22 AM

I would do a set of those... cant find them in the 8 and 10 inch wides I want for the 5 lugs though...

Possmguts · 01-09-2016, 11:22 AM

Quote:

Originally Posted by Jose's 69

Has anyone ever painted a set of these?

Ive seen them in powder coat different colors

**CanadianK10** · 02-26-2016, 12:45 PM

Excited to finally get these on my truck

- Adam

**72 Super** · 02-26-2016, 01:09 PM

Quote:

Originally Posted by CanadianK10

Excited to finally get these on my truck

- Adam

They look good on there. Nice truck also!

Ray

CG · 02-26-2016, 02:13 PM

Quote:

Originally Posted by Jose's 69

Has anyone ever painted a set of these?

I remember seeing them back in the 70s where the flat part inside of the slot holes were painted body color. Its pretty subtle, but I like it.

**WIDESIDE72** · 02-26-2016, 03:06 PM

Ive got a long way to go...

El Dorado Jim · 02-26-2016, 03:43 PM

Quote:

Originally Posted by CanadianK10

Excited to finally get these on my truck

- Adam

beautiful truck and I love the old school slot mags, that is what I had in high school and still have on a couple of my vehicles...

El Dorado Jim · 02-26-2016, 03:46 PM

Quote:

Originally Posted by stevewhitmore

For the old slots om my 69, I bought
7/16 x 3/4 long shaft lug nuts from Auto Zone but they were like a $1.00 a piece

love your truck, hate the way guys are lowering their trucks now

HeavyD · 02-26-2016, 03:47 PM

US wheel makes new slots that are very sinilar to the old ones, unlike the american racing replicas that had a much shallower look. Well worth checking out their website.

hayseed71 · 03-08-2016, 10:03 AM

I have always loved slots. Put a set on my first car, a 77 Cutlass, and had an 8 lug 16.5x9.75 set on a 3/4 ton 79 ford. I just bought a 65 c10 about 3 weeks ago and have been looking for a set for it. Last night I found a set of four 15x8 slots for 100 bucks on craigslist. Looks like im taking the 65 on a 250 mile road trip today to go get them. Ill post pictures when I get them on.

MikeB69C10 · 03-08-2016, 10:38 AM

Here are my 6 lug slots, but I'm pulling them off the truck next month.

fun in dirt · 03-08-2016, 01:21 PM

Love this thread!
See where it was 6 yrs ago mine were sitting in the shed waiting to put on after ton axel conversion. Well all that has been done & have rocked them the last 5 years. Aluminum doesn't stay all pretty from the use & mud, which is okay too. So, while summer time tires with steelies are on, the slots are getting some polish love. Still think slots are the shiznit!!!

12-23-2015, 12:57 AM	#277
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,331	Re: Slot lovers unite! - Here is a set I had a local guy polish for me. I just haven't decided what I want to put them on yet.... They are all 8.5 x 15 LockDoc Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

12-23-2015, 01:08 AM	#278
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,934	Re: Slot lovers unite! I could kick myself... Sold my 72 vintage 8 lug slots for $80 a couple years ago to make room in the garage (I needed it though). I miss em, one of the best lookin wheels that can go on these trucks in my book, other than steelies - and even better than steelies in some cases. Well, if the guy I sold em to is somewhere out there, I'd gladly buy them back for $90.

12-23-2015, 09:55 AM	#279
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Slot lovers unite! These are a hot looking, and tough, wheel polished out. But on the right truck, especially 4wds, I prefer them dulled out. Gives them a built for function look, while being undeniably handsome. most custom wheels these days look so frail to me, more like for a car (except so many are yucky black now) __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

12-23-2015, 12:34 PM	#281
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: Slot lovers unite! Here's a few trucks of mine with slots Attached Images __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

12-23-2015, 12:58 PM	#282
BluTrukker BOHICA Join Date: Mar 2008 Location: Stewartville, MN Posts: 440	Re: Slot lovers unite! I love my slots, now I need some better tires to compliment them! Attached Images __________________ Trying to save someone from their own stupidity is like teaching a pig to dance. It is a waste of your time, and it annoys the pig!

01-08-2016, 12:33 AM	#283
ChainGang Registered User Join Date: Mar 2013 Location: Weatherford okla Posts: 32	Re: Slot lovers unite! Here is my 1973 Sigman Pitman slots. Attached Images

01-08-2016, 12:36 AM	#284
CG BlahBlahBlah Join Date: Feb 2002 Location: Monroe, Wa. Posts: 19,782	Re: Slot lovers unite! Ugh, not this thread again ... drooool! cleszkie should post a pic of his blazer. Im just dreaming here __________________ … … … … … … … … ... … … … … … … … … … … … Monroe Swap meet May 18-19. Mike has the same spots for the NW guys he's had forever. Lunch time BBQ at the spaces. If you have stuff to sell bring it along. If you have a question PM stllookn (Mike) here via the board. https://67-72chevytrucks.com/vboard/...d.php?t=851291

01-08-2016, 08:17 AM	#286
72gmguy Senior Member Join Date: Mar 2009 Location: Brigantine NJ Posts: 819	Re: Slot lovers unite! Here is a set on a truck I purchased a few months ago. __________________ Jeremy 1969 Blazer 4x4 original cst 1971 Blazer partial 2wd convert 1972 Blazer 4x4 original cst 1970 Blazer 4x4 w/ 2 1/2in lift and 33in tires w/4 wheel camper 1970 4x4 suburban w/ 6in lift and 35in tires 1968 Corvette convertible 1970 Malibu convertible 1959 Brookwood wagon 1972 International Scout ii

01-09-2016, 02:32 AM	#287
Jose's 69 Registered User Join Date: Oct 2015 Location: Norwalk, CA Posts: 114	Re: Slot lovers unite! Has anyone ever painted a set of these?

01-09-2016, 03:46 AM	#288
Voodoo556 Registered User Join Date: Dec 2015 Location: Central Coast, California Posts: 207	Re: Slot lovers unite! I've got a set of 4 - 15"x9.75" US Indy Mags 8 lug For sale. Not polished. Have 32 lug nuts as well. I took them off my '70 k20. Have a potential buyer but if he passes they will be available. No shipping.

01-09-2016, 11:22 AM	#289
Possmguts Registered User Join Date: Nov 2014 Location: Columbiana Ohio Posts: 1,210	Re: Slot lovers unite! I would do a set of those... cant find them in the 8 and 10 inch wides I want for the 5 lugs though... __________________ "Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8

02-26-2016, 12:45 PM	#291
CanadianK10 Active Member Join Date: Nov 2013 Location: Goderich Ontario Posts: 123	Re: Slot lovers unite! Excited to finally get these on my truck - Adam __________________ 1967 K10 292, SM65 Transmission & NP205 Transfer Case My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=605048

02-26-2016, 03:06 PM	#294
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: Slot lovers unite! Ive got a long way to go... Attached Images

02-26-2016, 03:47 PM	#297
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,167	Re: Slot lovers unite! US wheel makes new slots that are very sinilar to the old ones, unlike the american racing replicas that had a much shallower look. Well worth checking out their website. __________________ "You can take the man out of PA, but you can't take PA out of the man"

03-08-2016, 10:03 AM	#298
hayseed71 Registered User Join Date: Nov 2012 Location: Bonne Terre, MO Posts: 28	Re: Slot lovers unite! I have always loved slots. Put a set on my first car, a 77 Cutlass, and had an 8 lug 16.5x9.75 set on a 3/4 ton 79 ford. I just bought a 65 c10 about 3 weeks ago and have been looking for a set for it. Last night I found a set of four 15x8 slots for 100 bucks on craigslist. Looks like im taking the 65 on a 250 mile road trip today to go get them. Ill post pictures when I get them on.



Register or Log In To remove these advertisements.

03-08-2016, 10:38 AM	#299
MikeB69C10 Registered User Join Date: Nov 2015 Location: Los Alamitos, Ca Posts: 55	Re: Slot lovers unite! Here are my 6 lug slots, but I'm pulling them off the truck next month. Attached Images

03-08-2016, 01:21 PM	#300
fun in dirt Registered User Join Date: Jan 2007 Location: Mississippi Posts: 2,118	Re: Slot lovers unite! Love this thread! See where it was 6 yrs ago mine were sitting in the shed waiting to put on after ton axel conversion. Well all that has been done & have rocked them the last 5 years. Aluminum doesn't stay all pretty from the use & mud, which is okay too. So, while summer time tires with steelies are on, the slots are getting some polish love. Still think slots are the shiznit!!! Attached Images __________________ '72 C to K20 "Cannibalizer" http://67-72chevytrucks.com/vboard/s...32#post8653432 '85 K30 "Big Nassy" '06 3500 Duramax ...tow truck '06 Silverado SS...DD '06 C1500 WT...DD '07 Classic C1500 WT...DD Built & sold cause can't keep 'em all: '72 Blazer "The Bucket" http://67-72chevytrucks.com/vboard/s...d.php?t=433190 '55 Chevy straight axle gasser https://www.trifive.com/forums/showthread.php?t=173938 '69 Pro Street Chevelle http://www.chevelles.com/forums/showthread.php?t=332541 '86 M1031 CUCV http://67-72chevytrucks.com/vboard/s...d.php?t=553619

Register or Log In To remove these advertisements.