Wiper motor problem... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

7tee · 04-06-2018, 08:44 AM

Replaced my wiper motor with a rebuilt one and when I turn them on they will sweep down some on to the cowl every time. Oddly they will park park in the correct position. Are there any adjustments I can do to correct this, thanks Ed...

projectking · 04-06-2018, 08:51 AM

Try moving the connector around a bit, I had to open the contacts up some to get a solid connection

**LockDoc** · 04-06-2018, 09:46 AM

Quote:

Originally Posted by 7tee

Replaced my wiper motor with a rebuilt one and when I turn them on they will sweep down some on to the cowl every time. Oddly they will park park in the correct position. Are there any adjustments I can do to correct this, thanks Ed...

How far up do they park if you adjust them so they only sweep to the bottom of the glass? Mine park about an inch above the edge of the rubber seal.

LockDoc

7tee · 04-06-2018, 12:34 PM

Quote:

Originally Posted by LockDoc

How far up do they park if you adjust them so they only sweep to the bottom of the glass? Mine park about an inch above the edge of the rubber seal.

LockDoc

Mine park about 1 1/2" to 2" above rubber but as soon as I turn them on they go down past the rubber and will keep doing it until I turn them off and go back to park... thanks for your reply, Ed

**LockDoc** · 04-06-2018, 02:57 PM

Quote:

Originally Posted by 7tee

Mine park about 1 1/2" to 2" above rubber but as soon as I turn them on they go down past the rubber and will keep doing it until I turn them off and go back to park... thanks for your reply, Ed

Double check how the arm is attached to the wiper motor under the cowl vent... Here is the instructions on the orientation.

LockDoc

04-06-2018, 08:44 AM	#1
7tee Registered User Join Date: Mar 2015 Location: Fletcher, N.C. Posts: 309	Wiper motor problem... Replaced my wiper motor with a rebuilt one and when I turn them on they will sweep down some on to the cowl every time. Oddly they will park park in the correct position. Are there any adjustments I can do to correct this, thanks Ed... __________________ 1970 C/10 350/T5 SWB stepper... 1979 Corvette 350/Auto T-top... 2010 Acura RL... 2015 2500HD Z-71 Silverado...

04-06-2018, 08:51 AM	#2
projectking Registered User Join Date: Oct 2006 Location: Orland Park Il Posts: 2,041	Re: Wiper motor problem... Try moving the connector around a bit, I had to open the contacts up some to get a solid connection __________________ 68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.