72 jimmy to 67 chevy blazer - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ClifBlazer · 10-21-2009, 01:07 PM

well I am going to get started parts are coming in started to take apart 67 lets see if I can load pic?

ClifBlazer · 10-21-2009, 01:20 PM

got bed off by my self a challang to say the least

ClifBlazer · 10-21-2009, 01:50 PM

heres the plain take 67 truck and remove body clean up frame change brakes and drive train put jimmy tube on after body work here pic. of jimmy its in a barn with suff stacked all around it.well I quess not won't load?

**lolife99** · 10-21-2009, 07:52 PM

Are you putting a Jimmy tub on a 2wd shortbed frame?
I assume you know the wheelbase is different?

ClifBlazer · 10-22-2009, 02:48 AM

11'' shorter in between cab and wheel well not shore where to cut out figered I'd find out when tube and frame meet

do you think this bed is any good to any one?

OARNGESI · 10-22-2009, 04:26 AM

looking forward to seeing this you should be able to sell the bed try puting it up on craigslist

ClifBlazer · 10-23-2009, 04:00 AM

lolife have you done this frame cut or have you seen a thread that shows it

think I down loaded jimmy pic.

ClifBlazer · 10-23-2009, 04:23 AM

more pic. of jimmy have to reduce them to fit

**lolife99** · 10-23-2009, 06:06 AM

No, I haven't seen this done. All the body mounts will have to be moved on the new frame.
I think it would be easier to add 2wd front suspenion to the original blazer frame.
Many people have done this "conversion".

ClifBlazer · 10-23-2009, 03:40 PM

I haven't found a frame that some one doesn't want as much as a truck for

ClifBlazer · 10-24-2009, 04:53 AM

any body seen a p/s pump like this?

low'n slow · 10-24-2009, 06:10 PM

Good grief, how many mirrors did that blazer have?

Rokcrln · 10-24-2009, 09:07 PM

Quote:

Originally Posted by lolife99

No, I haven't seen this done. All the body mounts will have to be moved on the new frame.
I think it would be easier to add 2wd front suspenion to the original blazer frame.
Many people have done this "conversion".

I agree!

Kevin
LFD Inc.

ClifBlazer · 10-25-2009, 03:33 AM

SO WHAT DO YOU THINK Ive had this 72 blazer 4wd one owner truck thats tub is les than all there, no rocker box d/p side ,floor pans = to most I see ,supports half there so tube is ruff .

jimmy I have has better tube this is the one I would put on 2wd swb frame so my thought I would have one of each 4x4 low2wd now you all got me thinkin DO I CUT THIS FRAME OR DO I MAKE A 4X4 OR DO I GO LOW WITH 4X4 FRAME than ether sell xstra parts or keep in tell i find chepper frame that i make some thing out of

ClifBlazer · 10-25-2009, 05:49 AM

And

**lolife99** · 10-25-2009, 09:27 AM

Don't cut the short wheelbase frame.
Find another 4x4 blazer frame to convert.
I wish I had something to trade for your stepside.
I have complete disc brake front crossmembers if you need one for your conversion.
Also trailing arms and crossmembers.

Do yourself a favor,... and find another blazer frame.

ClifBlazer · 10-25-2009, 08:15 PM

Thanks for input lolife you have good point swb frame is much better THan cutting down a lwb Besides the cab isnt so bad but the roof and drip rail are going to need work po did floors but didn't do kicks with the floors WHY do they do what they do? Your there and not do all thats needed done

ClifBlazer · 10-26-2009, 01:45 AM

floors buy the p/o

ClifBlazer · 11-05-2009, 07:28 PM

not going to cut swb frame may destroy 4x4 and make it a coil over frame. if I cant find one thats more in line to use ( broken axal bad t case or just a good deal) watchin C L

OARNGESI · 11-05-2009, 11:40 PM

HERES A THREAD I FOUND ON ADDING TRAILING ARMS TO A 4WD BLAZER FRAME YOU MAY BE INTERESTED http://67-72chevytrucks.com/vboard/s...d.php?t=218156 I GOT A 70 BLAZER IM DOING LIKE THIS

ClifBlazer · 11-06-2009, 03:18 AM

thanks I think I got a frame Oboy

ClifBlazer · 11-13-2009, 08:01 PM

Im going to get the frame from teeitup tommrow 72 jimmy 4x4 so know cutting swb truck [dont worry I have planes for it ]pics will come with frame

ClifBlazer · 03-12-2010, 02:23 AM

well parts shopers build for blazer is on hold so short bed has been getting some atinchin

ClifBlazer · 03-12-2010, 02:25 AM

found rust in coul lets start cuting it out

ClifBlazer · 03-12-2010, 04:17 AM

and windshild frame

10-21-2009, 01:07 PM	#1
ClifBlazer Registered User Join Date: Jul 2009 Location: Lee Summit ,MO. Posts: 160	72 jimmy to 67 chevy blazer well I am going to get started parts are coming in started to take apart 67 lets see if I can load pic? Attached Images Last edited by ClifBlazer; 10-21-2009 at 01:14 PM. Reason: add pic.

10-21-2009, 01:20 PM	#2
ClifBlazer Registered User Join Date: Jul 2009 Location: Lee Summit ,MO. Posts: 160	Re: 72 jimmy to 67 chevy blazer got bed off by my self a challang to say the least Attached Images Last edited by ClifBlazer; 10-21-2009 at 01:26 PM. Reason: add pic.

10-21-2009, 01:50 PM	#3
ClifBlazer Registered User Join Date: Jul 2009 Location: Lee Summit ,MO. Posts: 160	Re: 72 jimmy to 67 chevy blazer heres the plain take 67 truck and remove body clean up frame change brakes and drive train put jimmy tube on after body work here pic. of jimmy its in a barn with suff stacked all around it.well I quess not won't load?

10-21-2009, 07:52 PM	#4
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,682	Re: 72 jimmy to 67 chevy blazer Are you putting a Jimmy tub on a 2wd shortbed frame? I assume you know the wheelbase is different? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

10-22-2009, 02:48 AM	#5
ClifBlazer Registered User Join Date: Jul 2009 Location: Lee Summit ,MO. Posts: 160	Re: 72 jimmy to 67 chevy blazer 11'' shorter in between cab and wheel well not shore where to cut out figered I'd find out when tube and frame meet do you think this bed is any good to any one? Last edited by ClifBlazer; 10-22-2009 at 02:50 AM.

10-22-2009, 04:26 AM	#6
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: 72 jimmy to 67 chevy blazer looking forward to seeing this you should be able to sell the bed try puting it up on craigslist __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

10-23-2009, 04:00 AM	#7
ClifBlazer Registered User Join Date: Jul 2009 Location: Lee Summit ,MO. Posts: 160	Re: 72 jimmy to 67 chevy blazer lolife have you done this frame cut or have you seen a thread that shows it think I down loaded jimmy pic. Attached Images Last edited by ClifBlazer; 10-23-2009 at 04:08 AM.

10-23-2009, 04:23 AM	#8
ClifBlazer Registered User Join Date: Jul 2009 Location: Lee Summit ,MO. Posts: 160	Re: 72 jimmy to 67 chevy blazer more pic. of jimmy have to reduce them to fit Attached Images

10-23-2009, 06:06 AM	#9
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,682	Re: 72 jimmy to 67 chevy blazer No, I haven't seen this done. All the body mounts will have to be moved on the new frame. I think it would be easier to add 2wd front suspenion to the original blazer frame. Many people have done this "conversion". __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

10-23-2009, 03:40 PM	#10
ClifBlazer Registered User Join Date: Jul 2009 Location: Lee Summit ,MO. Posts: 160	Re: 72 jimmy to 67 chevy blazer I haven't found a frame that some one doesn't want as much as a truck for

10-24-2009, 04:53 AM	#11
ClifBlazer Registered User Join Date: Jul 2009 Location: Lee Summit ,MO. Posts: 160	Re: 72 jimmy to 67 chevy blazer any body seen a p/s pump like this? Attached Images

10-24-2009, 06:10 PM	#12
low'n slow Too Dumb To Know Better Join Date: Nov 2005 Location: Texas Posts: 882	Re: 72 jimmy to 67 chevy blazer Good grief, how many mirrors did that blazer have?

10-25-2009, 03:33 AM	#14
ClifBlazer Registered User Join Date: Jul 2009 Location: Lee Summit ,MO. Posts: 160	Re: 72 jimmy to 67 chevy blazer SO WHAT DO YOU THINK Ive had this 72 blazer 4wd one owner truck thats tub is les than all there, no rocker box d/p side ,floor pans = to most I see ,supports half there so tube is ruff .jimmy I have has better tube this is the one I would put on 2wd swb frame so my thought I would have one of each 4x4 low2wd now you all got me thinkin DO I CUT THIS FRAME OR DO I MAKE A 4X4 OR DO I GO LOW WITH 4X4 FRAME than ether sell xstra parts or keep in tell i find chepper frame that i make some thing out of Attached Images

10-25-2009, 05:49 AM	#15
ClifBlazer Registered User Join Date: Jul 2009 Location: Lee Summit ,MO. Posts: 160	Re: 72 jimmy to 67 chevy blazer And Attached Images Last edited by ClifBlazer; 10-25-2009 at 06:00 AM.

10-25-2009, 09:27 AM	#16
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,682	Re: 72 jimmy to 67 chevy blazer Don't cut the short wheelbase frame. Find another 4x4 blazer frame to convert. I wish I had something to trade for your stepside. I have complete disc brake front crossmembers if you need one for your conversion. Also trailing arms and crossmembers. Do yourself a favor,... and find another blazer frame. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 10-25-2009 at 09:28 AM.



Register or Log In To remove these advertisements.

10-25-2009, 08:15 PM	#17
ClifBlazer Registered User Join Date: Jul 2009 Location: Lee Summit ,MO. Posts: 160	Re: 72 jimmy to 67 chevy blazer Thanks for input lolife you have good point swb frame is much better THan cutting down a lwb Besides the cab isnt so bad but the roof and drip rail are going to need work po did floors but didn't do kicks with the floors WHY do they do what they do? Your there and not do all thats needed done

10-26-2009, 01:45 AM	#18
ClifBlazer Registered User Join Date: Jul 2009 Location: Lee Summit ,MO. Posts: 160	Re: 72 jimmy to 67 chevy blazer floors buy the p/o Attached Images

11-05-2009, 07:28 PM	#19
ClifBlazer Registered User Join Date: Jul 2009 Location: Lee Summit ,MO. Posts: 160	Re: 72 jimmy to 67 chevy blazer not going to cut swb frame may destroy 4x4 and make it a coil over frame. if I cant find one thats more in line to use ( broken axal bad t case or just a good deal) watchin C L Last edited by ClifBlazer; 11-05-2009 at 07:30 PM.

11-05-2009, 11:40 PM	#20
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: 72 jimmy to 67 chevy blazer HERES A THREAD I FOUND ON ADDING TRAILING ARMS TO A 4WD BLAZER FRAME YOU MAY BE INTERESTED http://67-72chevytrucks.com/vboard/s...d.php?t=218156 I GOT A 70 BLAZER IM DOING LIKE THIS __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

11-06-2009, 03:18 AM	#21
ClifBlazer Registered User Join Date: Jul 2009 Location: Lee Summit ,MO. Posts: 160	Re: 72 jimmy to 67 chevy blazer thanks I think I got a frame Oboy

11-13-2009, 08:01 PM	#22
ClifBlazer Registered User Join Date: Jul 2009 Location: Lee Summit ,MO. Posts: 160	Re: 72 jimmy to 67 chevy blazer Im going to get the frame from teeitup tommrow 72 jimmy 4x4 so know cutting swb truck [dont worry I have planes for it ]pics will come with frame Last edited by ClifBlazer; 11-13-2009 at 08:02 PM.

03-12-2010, 02:23 AM	#23
ClifBlazer Registered User Join Date: Jul 2009 Location: Lee Summit ,MO. Posts: 160	Re: 72 jimmy to 67 chevy blazer well parts shopers build for blazer is on hold so short bed has been getting some atinchin

03-12-2010, 02:25 AM	#24
ClifBlazer Registered User Join Date: Jul 2009 Location: Lee Summit ,MO. Posts: 160	Re: 72 jimmy to 67 chevy blazer found rust in coul lets start cuting it out Attached Images

03-12-2010, 04:17 AM	#25
ClifBlazer Registered User Join Date: Jul 2009 Location: Lee Summit ,MO. Posts: 160	Re: 72 jimmy to 67 chevy blazer and windshild frame Attached Images

Register or Log In To remove these advertisements.