Need pics 60-66 (slammed not bagged) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

oneoutrage · 08-08-2009, 02:02 PM

Is there any pics of any 60-66 slammed not bagged, im looking to see how low you can go without the bags.

highschoolbuilder · 08-08-2009, 04:45 PM

im honestly not sure what type of drop my truck is. but i know it doesn't have drop spindles.... and it sits that low. so you can do alot for a little bit of money!

daverod · 08-08-2009, 06:36 PM

Here mine jeep springs in rear and 1 1/2 coil wack in the front. Throw a couple 2x4's in the back and it drops abour 2" more.

oh ya I cut the rubber stops off and the brackets that held them.

MXmaniac · 08-08-2009, 07:03 PM

I haven't dropped the rear of mine yet, but the front has 3" drop springs, and I stepped the lower control arms 1-1/2". Total of 4-1/2" in front. The rear is going to have manual-fill airbags.

onequick66 · 08-09-2009, 12:10 AM

my 66 has a 4-6 drop on springs only and it still rides fine

terd ferguson · 08-09-2009, 01:02 AM

Two coils ut up front and Jeep TJ springs plus 3" blocks in the rear. The front is pretty much on the trimmed bumpstops and the rear is about an inch off. The rear rides good, the front not so good. 1 1/2 coils is probably about perfect.

***EDITED TO ADD***
The tires are 235/75/16

highschoolbuilder · 08-09-2009, 01:29 AM

can anyone take a guess at what mine is? it sits so low. way lower than the 6-4 and i just bought it that way. any ganders?

63 & 64 Bowties · 08-09-2009, 06:35 AM

My 63. about 1.5 or maybe 2 coils cut up front ( I can't remember), bump stops cut off and 70's Chevelle springs in the rear.

jonzcustomshop · 08-09-2009, 07:17 AM

Quote:

Originally Posted by 63 & 64 Bowties

My 63. about 1.5 or maybe 2 coils cut up front ( I can't remember), bump stops cut off and 70's Chevelle springs in the rear.

how do those chevelle springs handle a load? I know the jeep ones basically don't...

63 & 64 Bowties · 08-09-2009, 07:51 AM

Quote:

Originally Posted by jonzcustomshop

how do those chevelle springs handle a load? I know the jeep ones basically don't...

I don't really know Jon. I never haul anything. They do ride good though.

daverod · 08-09-2009, 09:21 AM

Quote:

Originally Posted by terd ferguson

Two coils ut up front and Jeep TJ springs plus 3" blocks in the rear. The front is pretty much on the trimmed bumpstops and the rear is about an inch off. The rear rides good, the front not so good. 1 1/2 coils is probably about perfect.

***EDITED TO ADD***
The tires are 235/75/16

Cut your stops off and the bracket that hold them. It will ride fine.

**ChiefRocka** · 08-09-2009, 10:50 AM

This thing was cut way down in the front....removed steering stop/bumpstop mounts and short shocks....rode great, and could still go down more...
-
-

terd ferguson · 08-09-2009, 11:10 AM

Quote:

Originally Posted by daverod

Cut your stops off and the bracket that hold them. It will ride fine.

I've got another set of lower control arms that are shaved. I just haven't swapped them out yet.

daverod · 08-09-2009, 12:53 PM

Quote:

Originally Posted by terd ferguson

I've got another set of lower control arms that are shaved. I just haven't swapped them out yet.

Just
get your handy saws all and a couple new blades . Takes about 5 min a side.

daverod · 08-09-2009, 12:55 PM

Quote:

Originally Posted by ChiefRocka

This thing was cut way down in the front....removed steering stop/bumpstop mounts and short shocks....rode great, and could still go down more...
-
-

Do you remember how many coils you cut off?

terd ferguson · 08-09-2009, 01:06 PM

Quote:

Originally Posted by daverod

Just
get your handy saws all and a couple new blades . Takes about 5 min a side.

But the "new" shaved control arms have new ball joints and shafts/bushings.

daverod · 08-09-2009, 01:54 PM

Quote:

Originally Posted by terd ferguson

But the "new" shaved control arms have new ball joints and shafts/bushings.

Ahhh.

1Bad62Pro/Street · 08-09-2009, 04:03 PM

http://nostalgiaprostreetstoyz.spaces.live.com/
Here is my '62:

Mustang II IFS Clip
MUSTANG II 2” DROPPED STEEL SPINDLES
Superior Automotive/3 in. U-Bolt Lowering block kit
Rear Suspension Mono Leaf Springs @ this time.
Suspension Moddified / Frame Altered
Going to make it even lower. When she was on the road the I have scrapes and dents on my crossmember
from speed bumps and some rail road tracks, not to mention my mufflers!

Build Thread Link Below:
http://67-72chevytrucks.com/vboard/s...d.php?t=321173

This is my projected future lowered look below:

Yea......... I have BIG dreams............
Dreams don't cost anything though.......

redneck6 · 09-13-2011, 09:08 PM

Quote:

Originally Posted by 63 & 64 Bowties

My 63. about 1.5 or maybe 2 coils cut up front ( I can't remember), bump stops cut off and 70's Chevelle springs in the rear.

love this truck needs fatter tires out back and to be in my drive way . but awsome , and i self less brought this tread back to the top as it is the one i use to find this site with out typing in the url .

lucifer · 09-14-2011, 07:27 PM

Eibach springs F&R plus drop spindles and 5 inch rear blocks. C-notched frame.
I have tons of suspension left and it rides great.

1Bad62Pro/Street · 09-14-2011, 07:43 PM

Updated pics:

Scot_Douglas · 09-14-2011, 08:12 PM

Front: 2" shaved crossmember / 2.5" drop spindles / new stock ride height springs
Rear: Tbird IRS, Eibach 600 lb/in springs

Rides pretty good.

62 short step · 09-14-2011, 09:06 PM

Here is my new to me 64.

All from ECE...
2-1/2" drop spindles
6-lug disc brake conversion
2" drop front coils
1-1/4" sway bar with brackets for lowered trucks
KYB front shocks
6" drop rear springs
shock relocator brackets for rear
KYB rear shocks
Super Panhard bar

*sinnersahuayo* · 09-14-2011, 09:10 PM

here my pic

*sinnersahuayo* · 09-14-2011, 09:14 PM

sorry i could not my pic but i fix it

08-08-2009, 02:02 PM	#1
oneoutrage Registered User Join Date: Mar 2009 Location: ODESSA,TX Posts: 45	Need pics 60-66 (slammed not bagged) Is there any pics of any 60-66 slammed not bagged, im looking to see how low you can go without the bags.

08-08-2009, 04:45 PM	#2
highschoolbuilder Registered User Join Date: Jul 2009 Location: sioux falls, sd Posts: 61	Re: Need pics 60-66 (slammed not bagged) im honestly not sure what type of drop my truck is. but i know it doesn't have drop spindles.... and it sits that low. so you can do alot for a little bit of money!

08-08-2009, 06:36 PM	#3
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Need pics 60-66 (slammed not bagged) Here mine jeep springs in rear and 1 1/2 coil wack in the front. Throw a couple 2x4's in the back and it drops abour 2" more.oh ya I cut the rubber stops off and the brackets that held them. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 08-09-2009 at 09:17 AM.

08-08-2009, 07:03 PM	#4
MXmaniac Registered User Join Date: Jan 2007 Location: Denton, Texas Posts: 356	Re: Need pics 60-66 (slammed not bagged) I haven't dropped the rear of mine yet, but the front has 3" drop springs, and I stepped the lower control arms 1-1/2". Total of 4-1/2" in front. The rear is going to have manual-fill airbags. __________________ Andrew '69 C-20(292, 4-speed) Retired Daily Driver '64 C-10(250, 3-speed) Fixerupper '97 F*rd Mustang GT(4.6L, 5-speed) Daily Driver If I only wanted two pedals I'd have bought a bicycle.

08-09-2009, 12:10 AM	#5
onequick66 Registered User Join Date: Feb 2009 Location: Littlefield, TX Posts: 9	Re: Need pics 60-66 (slammed not bagged) my 66 has a 4-6 drop on springs only and it still rides fine

08-09-2009, 01:02 AM	#6
terd ferguson Registered User Join Date: Mar 2009 Location: Concord, NC Posts: 531	Re: Need pics 60-66 (slammed not bagged) Two coils ut up front and Jeep TJ springs plus 3" blocks in the rear. The front is pretty much on the trimmed bumpstops and the rear is about an inch off. The rear rides good, the front not so good. 1 1/2 coils is probably about perfect. *EDITED TO ADD* The tires are 235/75/16 __________________ "I never apologize. I'm sorry, but that's just the way I am." - Homer J. Simpson 1955 2nd Series Chevy "King Of Trucks" Last edited by terd ferguson; 08-09-2009 at 01:03 AM.

08-09-2009, 01:29 AM	#7
highschoolbuilder Registered User Join Date: Jul 2009 Location: sioux falls, sd Posts: 61	Re: Need pics 60-66 (slammed not bagged) can anyone take a guess at what mine is? it sits so low. way lower than the 6-4 and i just bought it that way. any ganders?

08-09-2009, 06:35 AM	#8
63 & 64 Bowties and a few others Join Date: Jun 2007 Location: Blue Ridge Mountains of VA Posts: 5,638	Re: Need pics 60-66 (slammed not bagged) My 63. about 1.5 or maybe 2 coils cut up front ( I can't remember), bump stops cut off and 70's Chevelle springs in the rear. __________________ Bill US Army Vet -193rd Infantry BlueRidgeMuscleCars.com “The greatness of a nation and its moral progress can be judged by the way its animals are treated” Gandhi

08-09-2009, 10:50 AM	#12
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,147	Re: Need pics 60-66 (slammed not bagged) This thing was cut way down in the front....removed steering stop/bumpstop mounts and short shocks....rode great, and could still go down more... - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

08-09-2009, 04:03 PM	#18
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Need pics 60-66 (slammed not bagged) http://nostalgiaprostreetstoyz.spaces.live.com/ Here is my '62: Mustang II IFS Clip MUSTANG II 2” DROPPED STEEL SPINDLES Superior Automotive/3 in. U-Bolt Lowering block kit Rear Suspension Mono Leaf Springs @ this time. Suspension Moddified / Frame Altered Going to make it even lower. When she was on the road the I have scrapes and dents on my crossmember from speed bumps and some rail road tracks, not to mention my mufflers! Build Thread Link Below: http://67-72chevytrucks.com/vboard/s...d.php?t=321173 This is my projected future lowered look below: Yea......... I have BIG dreams............ Dreams don't cost anything though....... __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D. Last edited by 1Bad62Pro/Street; 08-09-2009 at 04:04 PM. Reason: Napoleon Dynamite: What tha flip? Cuz I wanted to......."Gosh!"

09-14-2011, 07:27 PM	#20
lucifer Registered User Join Date: Mar 2010 Location: simcoe ontario canada Posts: 681	Re: Need pics 60-66 (slammed not bagged) Eibach springs F&R plus drop spindles and 5 inch rear blocks. C-notched frame. I have tons of suspension left and it rides great. Attached Images __________________ 65 burb On the road Mar 26th Finally Last edited by lucifer; 09-14-2011 at 07:41 PM. Reason: spelling

09-14-2011, 07:43 PM	#21
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Need pics 60-66 (slammed not bagged) Updated pics: __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

09-14-2011, 08:12 PM	#22
Scot_Douglas Fabrication OCD Join Date: Oct 2009 Location: Howell, MI Posts: 403	Re: Need pics 60-66 (slammed not bagged) Front: 2" shaved crossmember / 2.5" drop spindles / new stock ride height springs Rear: Tbird IRS, Eibach 600 lb/in springs Rides pretty good. __________________ 1964 C10 - sold to chris1044 1966 C10 Build 'Fread

09-14-2011, 09:06 PM	#23
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: Need pics 60-66 (slammed not bagged) Here is my new to me 64. All from ECE... 2-1/2" drop spindles 6-lug disc brake conversion 2" drop front coils 1-1/4" sway bar with brackets for lowered trucks KYB front shocks 6" drop rear springs shock relocator brackets for rear KYB rear shocks Super Panhard bar __________________ www.louisianaclassictruckclub.com 1965 c-10 86 chevy c/k 20

09-14-2011, 09:10 PM	#24
sinnersahuayo Account Suspended Join Date: May 2011 Location: Bremerton Posts: 93	Re: Need pics 60-66 (slammed not bagged) here my pic



Register or Log In To remove these advertisements.

09-14-2011, 09:14 PM	#25
sinnersahuayo Account Suspended Join Date: May 2011 Location: Bremerton Posts: 93	Re: Need pics 60-66 (slammed not bagged) sorry i could not my pic but i fix it Attached Images

Register or Log In To remove these advertisements.