1970 swb K10 Resurrection (AKA "The Chum Bucket") "Photos" - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

115-K10 · 03-12-2012, 08:05 PM

Quote:

Originally Posted by 67chevy1series

beautiful!!!!!!!!!! but i just realized.... wheres the interior shots??? i know its proably just a dahs with a few compontens and not very complete.... but its probably beautiful like the rest of the truck!

Thanks, the interior still needs work but I will post some soon.
Posted via Mobile Device

67chevy1series · 03-12-2012, 08:55 PM

ok sounds good! thanks buddy.

Average Joe · 03-12-2012, 11:54 PM

Nice work! PS That's got to be one of the coolest Montes I have ever seen.

115-K10 · 03-25-2012, 08:46 PM

Been spending some time cutting and buffing the clear coat. Being almost a year old clear it takes a bit longer to remove all the wet sanding scratches but with a wool pad and mystic cut it cleans up.

Posted via Mobile Device

tsnow678 · 03-26-2012, 04:54 AM

Man that truck is slick!!! Good body work and correct prepping all the way!!!

**67cheby** · 03-26-2012, 09:42 AM

Beautiful !

freakshow108 · 03-26-2012, 06:50 PM

Love the color! She's looking sweeeeeeet!

115-K10 · 03-27-2012, 07:18 PM

Got the running lights going this afternoon. it's much easier to work on the lights without a windshield.

Posted via Mobile Device

72KAY20 · 03-27-2012, 07:36 PM

Running lights look great. Any advice on how to snake/run the wires? Was thinking about putting some running lights on the top of my cab. May not since I don't have the correct roof with the raised area around the lights.

115-K10 · 03-27-2012, 08:04 PM

Quote:

Originally Posted by 72KAY20

Running lights look great. Any advice on how to snake/run the wires? Was thinking about putting some running lights on the top of my cab. May not since I don't have the correct roof with the raised area around the lights.

That's a good question. The factory ran up the driver side windshield post. It may be tough to do with the roof skin on. Perhaps run a power lead around the inside windshield gasket and poke into the roof cavity beneath the gasket. Then drill the roof holes and fish the wire from there. Below I included some photos of how I ran the wires befor installing the original roof skin on the donor cab.

Another suggestion is to replace the roof skin since 98% of these trucks have rust issues up there but that's a lot more involved!

Posted via Mobile Device

Curt's_72 · 03-27-2012, 09:01 PM

Thanks for the great detail shots! That's what really helps.
The build is going great for you right now. Continue to update!

67chevy1series · 04-08-2012, 12:08 AM

very nice detailed pictures! you havent posted in awhile.... i hope that means your really busy and hard at work on the truck!

quadzero · 04-08-2012, 04:46 PM

What an amazing undertaking. My hat is off to all your dedication and patience. I can easily relate to the frame problems, we see alot of snow and salt on the roads here and it really takes a toll on the frames not to mention the sheet metal. Really enjoyed the box progress shots, this thing should go into a museam. Looks like you got a great shop to work in also, keep up the good work and enjoy this beauty.

115-K10 · 11-24-2012, 07:09 PM

It's been a bit since I've posted anything but finally put a plow on the k10. It's a fisher 7.5' RD Minute Mount 2. Now just have to wait for some snow to push. Oh and yes I will eventually paint that box!

Posted via Mobile Device

msgross · 11-24-2012, 11:37 PM

that's too nice to have out in the snow!

47thriftmaster · 11-25-2012, 06:35 AM

Very nice work, will be a blast to plow with.

115-K10 · 12-27-2012, 07:19 PM

Well got the chance to use the plow tonight. It was a lot better than using a snowblower!

Posted via Mobile Device

spudz · 12-27-2012, 10:32 PM

VERY nice!!! now get it out the snow lol.

115-K10 · 12-29-2012, 07:01 PM

Couldn't stay out of the snow today!

Posted via Mobile Device

67chevy1series · 12-30-2012, 06:16 AM

Awesome pics!!! Keep the pics coming!
Posted via Mobile Device

115-K10 · 12-30-2012, 08:20 PM

More plowing.

http://youtu.be/Z-ZYTDHQHrw
Posted via Mobile Device

67chevy1series · 01-05-2013, 02:10 AM

Just awesome! Makes me want to work on my 68 k10
Posted via Mobile Device

**WIDESIDE72** · 07-26-2013, 06:03 PM

Quote:

Originally Posted by 115-K10

Just figured out how to post images from the iPad/ip hone!

Do you care to share?
Posted via Mobile Device

115-K10 · 07-27-2013, 08:02 PM

Quote:

Originally Posted by WIDESIDE72

Do you care to share?
Posted via Mobile Device

I use photobucket and use an image link.
Posted via Mobile Device

67chevy1series · 12-03-2013, 03:11 AM

Any more progress?

03-12-2012, 08:55 PM	#177
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 1970 swb K10 Resurrection (AKA "The Chum Bucket") "Photos" ok sounds good! thanks buddy.

03-12-2012, 11:54 PM	#178
Average Joe Registered User Join Date: Feb 2009 Location: Southern Oregon Posts: 1,352	Re: 1970 swb K10 Resurrection (AKA "The Chum Bucket") "Photos" Nice work! PS That's got to be one of the coolest Montes I have ever seen.

03-25-2012, 08:46 PM	#179
115-K10 Registered User Join Date: Feb 2009 Location: Albany, NY Posts: 144	Re: 1970 swb K10 Resurrection (AKA "The Chum Bucket") "Photos" Been spending some time cutting and buffing the clear coat. Being almost a year old clear it takes a bit longer to remove all the wet sanding scratches but with a wool pad and mystic cut it cleans up. Posted via Mobile Device __________________ The chum Bucket - SWB K10 Restoration - http://67-72chevytrucks.com/vboard/s...d.php?t=329775 1971 SS454 Monte http://www.hemmings.com/mus/stories/...feature14.html 1970 - Monte Carlo Convertible, LS6, L89, M22 Build http://www.firstgenmc.com/ubbthreads...=360236&page=1 1970-SS454 Tripe Black - Barn Find http://www.firstgenerationmontecarlo...=421201&page=1

03-26-2012, 04:54 AM	#180
tsnow678 Registered User Join Date: Dec 2011 Location: Germanton, NC Posts: 61	Re: 1970 swb K10 Resurrection (AKA "The Chum Bucket") "Photos" Man that truck is slick!!! Good body work and correct prepping all the way!!! __________________ Link to my 69 Camaro 6.0/T56 swap: http://ls1tech.com/forums/conversion...69-camaro.html

03-26-2012, 09:42 AM	#181
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 1970 swb K10 Resurrection (AKA "The Chum Bucket") "Photos" Beautiful ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

03-26-2012, 06:50 PM	#182
freakshow108 Registered User Join Date: May 2010 Location: Eatonville WA Posts: 296	Re: 1970 swb K10 Resurrection (AKA "The Chum Bucket") "Photos" Love the color! She's looking sweeeeeeet!

03-27-2012, 07:18 PM	#183
115-K10 Registered User Join Date: Feb 2009 Location: Albany, NY Posts: 144	Re: 1970 swb K10 Resurrection (AKA "The Chum Bucket") "Photos" Got the running lights going this afternoon. it's much easier to work on the lights without a windshield. Posted via Mobile Device __________________ The chum Bucket - SWB K10 Restoration - http://67-72chevytrucks.com/vboard/s...d.php?t=329775 1971 SS454 Monte http://www.hemmings.com/mus/stories/...feature14.html 1970 - Monte Carlo Convertible, LS6, L89, M22 Build http://www.firstgenmc.com/ubbthreads...=360236&page=1 1970-SS454 Tripe Black - Barn Find http://www.firstgenerationmontecarlo...=421201&page=1

03-27-2012, 07:36 PM	#184
72KAY20 Registered User Join Date: Mar 2010 Location: Forest Hill, MD Posts: 171	Re: 1970 swb K10 Resurrection (AKA "The Chum Bucket") "Photos" Running lights look great. Any advice on how to snake/run the wires? Was thinking about putting some running lights on the top of my cab. May not since I don't have the correct roof with the raised area around the lights. __________________ 72Kay20 Bel Air, MD 1972 Hugger Orange K20 LWB 350, 4wd, 4spd Sm465, Dana 44, HO52 Other Toys 69 Cortez Silver Z28 86 White Buick T Type

03-27-2012, 09:01 PM	#186
Curt's_72 Registered User Join Date: Oct 2006 Location: Peru, Indiana Posts: 203	Re: 1970 swb K10 Resurrection (AKA "The Chum Bucket") "Photos" Thanks for the great detail shots! That's what really helps. The build is going great for you right now. Continue to update! __________________ Click below to see my build thread...lot's of stuff there http://67-72chevytrucks.com/vboard/s...d.php?t=494493 Last edited by Curt's_72; 03-27-2012 at 09:02 PM. Reason: typo

04-08-2012, 12:08 AM	#187
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 1970 swb K10 Resurrection (AKA "The Chum Bucket") "Photos" very nice detailed pictures! you havent posted in awhile.... i hope that means your really busy and hard at work on the truck!

04-08-2012, 04:46 PM	#188
quadzero Registered User Join Date: Mar 2012 Location: Red Lake, ON Posts: 106	Re: 1970 swb K10 Resurrection (AKA "The Chum Bucket") "Photos" What an amazing undertaking. My hat is off to all your dedication and patience. I can easily relate to the frame problems, we see alot of snow and salt on the roads here and it really takes a toll on the frames not to mention the sheet metal. Really enjoyed the box progress shots, this thing should go into a museam. Looks like you got a great shop to work in also, keep up the good work and enjoy this beauty.

11-24-2012, 07:09 PM	#189
115-K10 Registered User Join Date: Feb 2009 Location: Albany, NY Posts: 144	Re: 1970 swb K10 Resurrection (AKA "The Chum Bucket") "Photos" It's been a bit since I've posted anything but finally put a plow on the k10. It's a fisher 7.5' RD Minute Mount 2. Now just have to wait for some snow to push. Oh and yes I will eventually paint that box! Posted via Mobile Device __________________ The chum Bucket - SWB K10 Restoration - http://67-72chevytrucks.com/vboard/s...d.php?t=329775 1971 SS454 Monte http://www.hemmings.com/mus/stories/...feature14.html 1970 - Monte Carlo Convertible, LS6, L89, M22 Build http://www.firstgenmc.com/ubbthreads...=360236&page=1 1970-SS454 Tripe Black - Barn Find http://www.firstgenerationmontecarlo...=421201&page=1

11-24-2012, 11:37 PM	#190
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 1970 swb K10 Resurrection (AKA "The Chum Bucket") "Photos" that's too nice to have out in the snow! __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

11-25-2012, 06:35 AM	#191
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: 1970 swb K10 Resurrection (AKA "The Chum Bucket") "Photos" Very nice work, will be a blast to plow with.

12-27-2012, 07:19 PM	#192
115-K10 Registered User Join Date: Feb 2009 Location: Albany, NY Posts: 144	Re: 1970 swb K10 Resurrection (AKA "The Chum Bucket") "Photos" Well got the chance to use the plow tonight. It was a lot better than using a snowblower! Posted via Mobile Device __________________ The chum Bucket - SWB K10 Restoration - http://67-72chevytrucks.com/vboard/s...d.php?t=329775 1971 SS454 Monte http://www.hemmings.com/mus/stories/...feature14.html 1970 - Monte Carlo Convertible, LS6, L89, M22 Build http://www.firstgenmc.com/ubbthreads...=360236&page=1 1970-SS454 Tripe Black - Barn Find http://www.firstgenerationmontecarlo...=421201&page=1



Register or Log In To remove these advertisements.

12-27-2012, 10:32 PM	#193
spudz Registered User Join Date: Oct 2005 Location: Branchville SC Posts: 1,647	Re: 1970 swb K10 Resurrection (AKA "The Chum Bucket") "Photos" VERY nice!!! now get it out the snow lol. __________________ 2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks..

12-29-2012, 07:01 PM	#194
115-K10 Registered User Join Date: Feb 2009 Location: Albany, NY Posts: 144	Re: 1970 swb K10 Resurrection (AKA "The Chum Bucket") "Photos" Couldn't stay out of the snow today! Posted via Mobile Device __________________ The chum Bucket - SWB K10 Restoration - http://67-72chevytrucks.com/vboard/s...d.php?t=329775 1971 SS454 Monte http://www.hemmings.com/mus/stories/...feature14.html 1970 - Monte Carlo Convertible, LS6, L89, M22 Build http://www.firstgenmc.com/ubbthreads...=360236&page=1 1970-SS454 Tripe Black - Barn Find http://www.firstgenerationmontecarlo...=421201&page=1

12-30-2012, 06:16 AM	#195
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 1970 swb K10 Resurrection (AKA "The Chum Bucket") "Photos" Awesome pics!!! Keep the pics coming! Posted via Mobile Device

12-30-2012, 08:20 PM	#196
115-K10 Registered User Join Date: Feb 2009 Location: Albany, NY Posts: 144	Re: 1970 swb K10 Resurrection (AKA "The Chum Bucket") "Photos" More plowing. http://youtu.be/Z-ZYTDHQHrw Posted via Mobile Device __________________ The chum Bucket - SWB K10 Restoration - http://67-72chevytrucks.com/vboard/s...d.php?t=329775 1971 SS454 Monte http://www.hemmings.com/mus/stories/...feature14.html 1970 - Monte Carlo Convertible, LS6, L89, M22 Build http://www.firstgenmc.com/ubbthreads...=360236&page=1 1970-SS454 Tripe Black - Barn Find http://www.firstgenerationmontecarlo...=421201&page=1

01-05-2013, 02:10 AM	#197
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 1970 swb K10 Resurrection (AKA "The Chum Bucket") "Photos" Just awesome! Makes me want to work on my 68 k10 Posted via Mobile Device

12-03-2013, 03:11 AM	#200
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 1970 swb K10 Resurrection (AKA "The Chum Bucket") "Photos" Any more progress?

Register or Log In To remove these advertisements.