post em up.... - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**regan wilson** · 03-18-2008, 05:37 PM

Quote:

Originally Posted by bigjimzlll

116...? You running squeeze on that boat? I think my builder went too tight on the LSA. I would love to "just" swap out cams to do a back to back trial, but if it comes apart that far...it's going from a 540 to a 565

No I havnt had spray on it since 1989 . I was trying to get more mph . Like I said I just missed it . Oh our trip to track didnt go to well we had a constant 20 plus mph headwind . The track was also marginal at best . The two passes I made I was out of the groove .Could only go 5.77 @ 121 and 9.05 @ 147 . (I can run more mph an the stop)One buddy of mine with a Camaro was 2 tenths and 6mph slow and another with a truck was 3 tenths slow so I guess this thing will run 8.80s .

bigjimzlll · 03-19-2008, 02:30 AM

How much do youusually pick up on the back half? Looks like you picked up 26mph on that pass. Thats pretty good with one of our barn doors. I'm about 23-24mph

Super73 · 03-19-2008, 07:46 AM

Interesting Jim. I would have thought you would pick up a bit more MPH than me in the last 1/8.. Last time at the track I went 89mph in the 1/8 with 110mph on the big end (21mph). My recent late night solo farm field test showed 93mph 1/8 and 116mph (23mph). I know it's not the track timers on the last one, but the Gtech was with in .1 and 1mph on a bunch of back to back track passes.

bigjimzlll · 03-19-2008, 07:59 AM

I was just looking at my last pass of of last year.
60'-1.35
660'-6.07 @ 112.47
1320-9.60 @ 138.31

so I picked up a touch less than 26mph...I was still tuning most of last year

Super73 · 03-19-2008, 08:12 AM

Change your sig

Still says 9.95 @134..

bigjimzlll · 03-19-2008, 09:33 AM

I hope to be faster the first time out this year....I;ll wait til I get the 5.9x sub 9.50 pass

gchemist · 03-19-2008, 10:17 AM

83 Silverado XST
ZZ4 355+ HP Serial # 1232 (Craigslist find!!)
RPM Air Gap
Dual ram air intake
3/4 length Chevelle ceramic headers
X-pipe kit with dual Magna Flows
No cats.
Custom 700R4 - neck breaker
12 bolt 3.08 rear with 27" tires
Custom traction bars

ET no idea. Planning a truck shoot out in Temple, TX this summer.

djracer · 03-19-2008, 03:38 PM

Quote:

Originally Posted by gchemist

83 Silverado XST
ZZ4 355+ HP Serial # 1232 (Craigslist find!!)
RPM Air Gap
Dual ram air intake
3/4 length Chevelle ceramic headers
X-pipe kit with dual Magna Flows
No cats.
Custom 700R4 - neck breaker
12 bolt 3.08 rear with 27" tires
Custom traction bars

ET no idea. Planning a truck shoot out in Temple, TX this summer.

Looks sweet but I would go atleast 3.42 or add a little spray!

**regan wilson** · 03-19-2008, 05:45 PM

Quote:

Originally Posted by regan wilson

No I havnt had spray on it since 1989 . I was trying to get more mph . Like I said I just missed it . Oh our trip to track didnt go to well we had a constant 20 plus mph headwind . The track was also marginal at best . The two passes I made I was out of the groove .Could only go 5.77 @ 121 and 9.05 @ 147 . (I can run more mph an the stop)One buddy of mine with a Camaro was 2 tenths and 6mph slow and another with a truck was 3 tenths slow so I guess this thing will run 8.80s .

I usually pick up 30 to 31 in the back half wide open or on the stop . Normal back half et on the stop 3.32 to 3.35 , w/o 3.22 to 3.25.

**regan wilson** · 03-19-2008, 05:46 PM

oops I meant to quote bigjim

gchemist · 03-21-2008, 08:57 PM

Quote:

Originally Posted by djracer

Looks sweet but I would go atleast 3.42 or add a little spray!

Yea, I'm finding out the 3.08's are not going to work very well. I'm looking for 3.42 or 3.73s. I may end up with 3.73 because I want to keep the 12 bolt. Pull strong but a little more gear will tear up the tires better.

I'm guess 14's with traction. What da think?

djracer · 03-22-2008, 06:23 AM

you should be able to do that!

kwhite4 · 03-23-2008, 12:12 AM

567 BBC
Dart block
Callies and Manley guts
JE 14.5 slugs
Profiler 360's
Crane goodies
Sniper intake with 1150 Quickfuel DOM
All ported pretty
Dynoed 1011 HP @ 7400
almost 900 FT LBS
Abruzzi 1.80 Super pro glide
Moser Fab 9 With 430 pro gear
Ladder Bars and coilovers

Dont know what she will turn yet still needs cage and a few other nic nacs.

Went from mild BBC to this and nothing would carry over, had to change everything from fuel system up

Man this sport is costly but alot of fun.

OH speaking of costly I bought 10 gallons of fuel today, at $11.00 a gallon good thing I dont drive on the street no more.

sqrbdy · 03-23-2008, 06:29 AM

Here are a few pics of mine.

First 2 Pics are the way I took it to the track last time. Street Tires with 35 psi in the tires. Spun the tires for the first 150 yards.

gm 350 crate motor
vortec heads
510 lift cam (not sure of the other specs for the cam)
demon carb
long tubes
100 shot (never even hit the bottle, hell I couldn't get traction with motor, no way was I gonna try juice it.
3500 stall

14.14 1/4
90.83 mph

Second two pics are how I am going to try and combat the traction issue.

How much time do you think I can shave with the slicks and the bottle?

djracer · 03-23-2008, 08:35 AM

sqrbdy that's a sweet @ss ride the slicks should help a bunch!

djracer · 03-23-2008, 08:37 AM

Quote:

Originally Posted by kwhite4

567 BBC
Dart block
Callies and Manley guts
JE 14.5 slugs
Profiler 360's
Crane goodies
Sniper intake with 1150 Quickfuel DOM
All ported pretty
Dynoed 1011 HP @ 7400
almost 900 FT LBS
Abruzzi 1.80 Super pro glide
Moser Fab 9 With 430 pro gear
Ladder Bars and coilovers

Dont know what she will turn yet still needs cage and a few other nic nacs.

Went from mild BBC to this and nothing would carry over, had to change everything from fuel system up

Man this sport is costly but alot of fun.

OH speaking of costly I bought 10 gallons of fuel today, at $11.00 a gallon good thing I dont drive on the street no more.

What's the deck height and the bore and stroke! Sounds like what I want to build!

sqrbdy · 03-24-2008, 07:43 AM

Quote:

Originally Posted by sqrbdy

Here are a few pics of mine.

First 2 Pics are the way I took it to the track last time. Street Tires with 35 psi in the tires. Spun the tires for the first 150 yards.

gm 350 crate motor
vortec heads
510 lift cam (not sure of the other specs for the cam)
demon carb
long tubes
100 shot (never even hit the bottle, hell I couldn't get traction with motor, no way was I gonna try juice it.
3500 stall

14.14 1/4
90.83 mph

Second two pics are how I am going to try and combat the traction issue.

How much time do you think I can shave with the slicks and the bottle?

Pulled a 12.91 1/4 et tonight. All throttle no bottle. Next trip out I'm gonna juice it!

Super73 · 03-24-2008, 01:33 PM

What was the new mph? 105ish? How about your 60'?

sqrbdy · 03-24-2008, 06:04 PM

Quote:

Originally Posted by Super73

What was the new mph? 105ish? How about your 60'?

105.60 mph and I missed 2nd gear. I ran it up to the rev limiter and left it there it seems like forever then I shifted. I just installed a Hurst Promatic 2 Ratchet Shifter and I was excited about the launch and just forgot to shift. That annoying orange light on the tach should have gave me a better inidication that it was time to shift

. Oh well it was only my second time in my life to go to the track. I think it will get better with more experience.

60 ft was 1.79

reaction time was 1.0095 (I know I waited to long but I had to finish my sandwich

)

djracer · 03-24-2008, 06:23 PM

cool! Seat time is your friend.
! Try leaving on the bottom yellow!

69trk · 03-26-2008, 04:35 AM

sqrbdy, love that color, very nice truck!!!

sqrbdy · 03-26-2008, 05:26 PM

Thanks for the compliments. I am really loving this truck.

Oh yeah, and this is justy an absolutely fantastic forum. There are just a bunch of very nice folks on this board. Some of the previous hobbies I have been involved in the people seemed snobish, that is clearly not the case here.

djracer · 03-27-2008, 06:51 AM

Thanks for the props on the board! I have been on several boards and this one kicks all their @sses!

collin86 · 03-27-2008, 10:29 AM

man if you can get traction and get the shifts and reaction times dialed in...you can be in the 11's with no bottle.

what hp numbers are you runnning

hotrod 80 · 03-27-2008, 10:29 AM

Quote:

Originally Posted by sqrbdy

105.60 mph and I missed 2nd gear. I ran it up to the rev limiter and left it there it seems like forever then I shifted. I just installed a Hurst Promatic 2 Ratchet Shifter and I was excited about the launch and just forgot to shift. That annoying orange light on the tach should have gave me a better inidication that it was time to shift

. Oh well it was only my second time in my life to go to the track. I think it will get better with more experience.

60 ft was 1.79

reaction time was 1.0095 (I know I waited to long but I had to finish my sandwich

)

Was that at Evadale ?

03-19-2008, 02:30 AM	#52
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	Re: post em up.... How much do youusually pick up on the back half? Looks like you picked up 26mph on that pass. Thats pretty good with one of our barn doors. I'm about 23-24mph __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA Last edited by bigjimzlll; 03-19-2008 at 02:32 AM.*

03-19-2008, 07:46 AM	#53
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: post em up.... Interesting Jim. I would have thought you would pick up a bit more MPH than me in the last 1/8.. Last time at the track I went 89mph in the 1/8 with 110mph on the big end (21mph). My recent late night solo farm field test showed 93mph 1/8 and 116mph (23mph). I know it's not the track timers on the last one, but the Gtech was with in .1 and 1mph on a bunch of back to back track passes.

03-19-2008, 07:59 AM	#54
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	Re: post em up.... I was just looking at my last pass of of last year. 60'-1.35 660'-6.07 @ 112.47 1320-9.60 @ 138.31 so I picked up a touch less than 26mph...I was still tuning most of last year __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA

03-19-2008, 08:12 AM	#55
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: post em up.... Change your sig Still says 9.95 @134..

03-19-2008, 09:33 AM	#56
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	Re: post em up.... I hope to be faster the first time out this year....I;ll wait til I get the 5.9x sub 9.50 pass __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA

03-19-2008, 10:17 AM	#57
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Re: post em up.... 83 Silverado XST ZZ4 355+ HP Serial # 1232 (Craigslist find!!) RPM Air Gap Dual ram air intake 3/4 length Chevelle ceramic headers X-pipe kit with dual Magna Flows No cats. Custom 700R4 - neck breaker 12 bolt 3.08 rear with 27" tires Custom traction bars ET no idea. Planning a truck shoot out in Temple, TX this summer. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos Last edited by gchemist; 03-19-2008 at 10:18 AM.

03-19-2008, 05:46 PM	#60
regan wilson Senior Member Join Date: Mar 2008 Location: tyler texas Posts: 1,531	Re: post em up.... oops I meant to quote bigjim __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph

03-22-2008, 06:23 AM	#62
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: post em up.... you should be able to do that! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

03-23-2008, 12:12 AM	#63
kwhite4 Junior Member Join Date: Oct 2004 Location: Gatesville texas Posts: 180	Re: post em up.... 567 BBC Dart block Callies and Manley guts JE 14.5 slugs Profiler 360's Crane goodies Sniper intake with 1150 Quickfuel DOM All ported pretty Dynoed 1011 HP @ 7400 almost 900 FT LBS Abruzzi 1.80 Super pro glide Moser Fab 9 With 430 pro gear Ladder Bars and coilovers Dont know what she will turn yet still needs cage and a few other nic nacs. Went from mild BBC to this and nothing would carry over, had to change everything from fuel system up Man this sport is costly but alot of fun. OH speaking of costly I bought 10 gallons of fuel today, at $11.00 a gallon good thing I dont drive on the street no more. __________________ 68 GMC 565 BBC Abruzzi super pro glide 9.85@135.00

03-23-2008, 06:29 AM	#64
sqrbdy Registered User Join Date: Mar 2008 Location: Spring, Texas Posts: 207	Re: post em up.... Here are a few pics of mine. First 2 Pics are the way I took it to the track last time. Street Tires with 35 psi in the tires. Spun the tires for the first 150 yards. gm 350 crate motor vortec heads 510 lift cam (not sure of the other specs for the cam) demon carb long tubes 100 shot (never even hit the bottle, hell I couldn't get traction with motor, no way was I gonna try juice it. 3500 stall 14.14 1/4 90.83 mph Second two pics are how I am going to try and combat the traction issue. How much time do you think I can shave with the slicks and the bottle? __________________ Ain't Nobody Like a Square Body sqrbdy myspace

03-23-2008, 08:35 AM	#65
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: post em up.... sqrbdy that's a sweet @ss ride the slicks should help a bunch! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

03-24-2008, 01:33 PM	#68
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: post em up.... What was the new mph? 105ish? How about your 60'?

03-24-2008, 06:23 PM	#70
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: post em up.... cool! Seat time is your friend. ! Try leaving on the bottom yellow! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

03-26-2008, 04:35 AM	#71
69trk Registered User Join Date: Oct 2006 Location: bridgecreek ok. Posts: 1,214	Re: post em up.... sqrbdy, love that color, very nice truck!!!

03-26-2008, 05:26 PM	#72
sqrbdy Registered User Join Date: Mar 2008 Location: Spring, Texas Posts: 207	Re: post em up.... Thanks for the compliments. I am really loving this truck. Oh yeah, and this is justy an absolutely fantastic forum. There are just a bunch of very nice folks on this board. Some of the previous hobbies I have been involved in the people seemed snobish, that is clearly not the case here. __________________ Ain't Nobody Like a Square Body sqrbdy myspace



Register or Log In To remove these advertisements.

03-27-2008, 06:51 AM	#73
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: post em up.... Thanks for the props on the board! I have been on several boards and this one kicks all their @sses! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

03-27-2008, 10:29 AM	#74
collin86 Registered User Join Date: Sep 2007 Location: spokane, WA Posts: 136	Re: post em up.... man if you can get traction and get the shifts and reaction times dialed in...you can be in the 11's with no bottle. what hp numbers are you runnning __________________ 1986 swb...soon to be some weird pro touring look..but better 92 jeep cherokee.... crawler

Register or Log In To remove these advertisements.