New Project Chevy AD truck - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

48ChevBagged · 12-21-2012, 06:37 PM

Quote:

Originally Posted by BlueJeep

Looks good! What size tires are on there now and how far off the frame did you mount the cab?

Right now it has 15'' wheels. Not sure on the exact tire size. I bought this as an unfinished project off someone. When I got it they already had the cab mounted to the chassis. The last truck like this I built on a s10 chassis was higher though I do know that. I didnt have to tunnel the floor like this for the driveshaft. I just had to build a small hump for the trans. I am going to try and tear the truck back down this weekend and do all my welding and clean everything to paint the chassis. I will try and measure then. If I had to guess its only raised off the frame about 3''.

48ChevBagged · 01-07-2013, 07:09 PM

We have been busting our buts on the truck here lately. I have the chassis cleaned and painted in POR-15 now. I also started the metal work on the cab. Both cab corners are replaced and starting on the inner and outer door bottoms. Those Chinese Patch panels are not easy to work with and get fitting back right.

Name: 20121229_162620.jpg
Views: 2463
Size: 52.3 KB

Name: 20121229_162620.jpg
Views: 2463
Size: 52.3 KB

Name: 20121222_164110.jpg
Views: 2431
Size: 48.7 KB

Name: 20121226_161007.jpg
Views: 2489
Size: 51.7 KB

Name: 20121226_181441.jpg
Views: 2504
Size: 60.6 KB

Name: 20121226_181450.jpg
Views: 2583
Size: 43.1 KB

OrrieG · 01-07-2013, 07:56 PM

Maybe you just need to learn to swear in Chinese? Here is some help
http://blogs.transparent.com/chinese...ds-in-chinese/

Progress is looking good.

xpickup · 01-07-2013, 09:43 PM

48ChevBagged, all what do you mean, those panels ALWAYS fit just right. HAHA. They always need tweaked. Looks good.

Shannon

48ChevBagged · 01-11-2013, 02:16 PM

Got some updates on the truck been going at it pretty hard here lately. I now have all the air ride plumbed and wired up. I got to test it for the first time yesterday. I also got my engine and transmission painted and I plan on dropping it back in real soon. In the mean time I had another one follow me home.

Name: 20130109_173253.jpg
Views: 2395
Size: 64.4 KB

Name: 20130109_173253.jpg
Views: 2395
Size: 64.4 KB

Name: 20130109_173324.jpg
Views: 2374
Size: 59.6 KB

Name: 20130105_120559.jpg
Views: 2375
Size: 54.5 KB

Name: 20130107_171301.jpg
Views: 2377
Size: 47.7 KB

Name: 20130101_170555.jpg
Views: 8942
Size: 47.0 KB

**oldman3** · 01-11-2013, 07:39 PM

The one that followed you home looks interesting....Jim

48ChevBagged · 02-08-2013, 02:59 PM

Haven't updated my thread in a while. I have still been busy working on my truck though Got some progress pics. The engine and trans are back in and the cab is back on the chassis. Dash is painted and the glass is back in. Also got my gauges mounted and the wiring is almost done. Hoping to do a test fire on the engine this weekend.

Name: 20130112_175327[2].jpg
Views: 2320
Size: 62.4 KB

Name: 20130112_175327[2].jpg
Views: 2320
Size: 62.4 KB

Name: 20130112_175358[1].jpg
Views: 2273
Size: 59.4 KB

Name: 20130129_155429[1].jpg
Views: 2286
Size: 32.0 KB

Name: 20130130_121806[1].jpg
Views: 2268
Size: 51.6 KB

Name: 20130204_153129.jpg
Views: 2334
Size: 45.5 KB

**oldman3** · 02-08-2013, 05:01 PM

Looks like your moving along nicely, looks great...Jim

**Homebuilt Hotrods** · 02-10-2013, 03:10 PM

If you dont mind me asking did you build or buy the ls mounts for your s10 AD swap? Im thinking of doing something similiar with a 5.3 and was hoping for some input from someone who has done it.

48ChevBagged · 02-15-2013, 12:04 PM

Quote:

Originally Posted by Homebuilt Hotrods

If you dont mind me asking did you build or buy the ls mounts for your s10 AD swap? Im thinking of doing something similiar with a 5.3 and was hoping for some input from someone who has done it.

Yes we came up with what we wanted and had a local guy laser cut them out for us. They came out nice.

48ChevBagged · 02-15-2013, 12:35 PM

Gonna have wheels and tires put on tomorrow. Then its time for a shake down run. After that I gotta finish my hood and put a little paint on it and its minor details from there.

Name: 20130214_184141.jpg
Views: 2191
Size: 52.2 KB

Name: 20130214_184141.jpg
Views: 2191
Size: 52.2 KB

Name: 20130214_184107.jpg
Views: 2197
Size: 42.1 KB

Name: 20130214_184040.jpg
Views: 2192
Size: 49.2 KB

Name: 20130214_183916.jpg
Views: 2225
Size: 54.1 KB

JTRACEY · 02-15-2013, 02:39 PM

Truck looks really nice! Great choice on the accuair. Are you gonna run the eLevel too?

48ChevBagged · 02-15-2013, 05:47 PM

Quote:

Originally Posted by JTRACEY

Truck looks really nice! Great choice on the accuair. Are you gonna run the eLevel too?

Nah gonna hold off on the e level. Maybe one day when I build one to keep. I really like the manifold and how it works though so far. For now this one has an avs switch box wired to it.

**oldman3** · 02-15-2013, 08:20 PM

Cool....Jim

**youngrodder** · 02-15-2013, 08:46 PM

Looks really good. Two sweet rides (burb and truck).
Marc
Posted via Mobile Device

48ChevBagged · 02-22-2013, 11:59 AM

Got the new wheels and tires on. Doesn't even look like the same truck. Also had a local guy here come out and pin stripe it and paint my shop logo on the door.

Getting real close to being done with this truck

Name: new wheels.jpg
Views: 7464
Size: 58.6 KB

Name: new wheels.jpg
Views: 7464
Size: 58.6 KB

Name: Dash 51 chevy.jpg
Views: 2216
Size: 32.2 KB

Name: rear glass shot 51 chevy.jpg
Views: 2236
Size: 22.5 KB

Name: hood 51 chevy.jpg
Views: 2347
Size: 33.3 KB

**oldman3** · 02-22-2013, 05:41 PM

Wheels and tires made a big difference, looks good and so does the stripping...Jim

ACII · 02-22-2013, 07:00 PM

what is the manufacturer of the wheels ??

thanks

**Homebuilt Hotrods** · 02-23-2013, 03:06 PM

Quote:

Originally Posted by 48ChevBagged

Yes we came up with what we wanted and had a local guy laser cut them out for us. They came out nice.

Would you know how I could get ahold of a set for my 47 chevy with the s10 frame with the 5.3 swap? Id be happy to buy a set. PM me if you can help out.
Thanks very much. Awesome project you got there!

SSABMUD · 02-24-2013, 12:52 AM

Love your trucks. Nice work.
Posted via Mobile Device

48 GMC BURB · 02-24-2013, 08:56 AM

Very Sweet truck

Quote:

Originally Posted by 48ChevBagged

Got the new wheels and tires on. Doesn't even look like the same truck. Also had a local guy here come out and pin stripe it and paint my shop logo on the door.

Getting real close to being done with this truck

Attachment 1064687

Attachment 1064688

Attachment 1064689

Attachment 1064690

franky69c10 · 04-08-2013, 06:58 PM

what year and what frame do you use off a s10, me and my pops picked up a 48 wanna do what your doing.... do you use a single cab longbed s10 frame or short bed king cab.. thx

48ChevBagged · 04-11-2013, 10:20 AM

It is best to get a s10 standard cab long bed truck from 82-93. Those are the easiest to use. You can also use the steering column and the brake booster and pedals from the s10.

dubie · 04-11-2013, 04:22 PM

damn fine looking old school truck!!!

98layinframe · 04-11-2013, 10:14 PM

What did you use to paint the interior? Looks like it has a little bit of texture to it? I really like it..
Posted via Mobile Device

01-07-2013, 07:09 PM	#27
48ChevBagged Registered User Join Date: Sep 2012 Location: Valdese NC Posts: 151	Re: New Project Chevy AD truck We have been busting our buts on the truck here lately. I have the chassis cleaned and painted in POR-15 now. I also started the metal work on the cab. Both cab corners are replaced and starting on the inner and outer door bottoms. Those Chinese Patch panels are not easy to work with and get fitting back right. __________________ 51 Chevy Truck S-10 Chassis Bagged http://67-72chevytrucks.com/vboard/s...d.php?t=545820 49 Burb with a 5.3 LS swap http://www.67-72chevytrucks.com/vboa...d.php?t=612572 Find us on Facebook https://www.facebook.com/pages/Smitt...s/252838673654

01-07-2013, 07:56 PM	#28
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: New Project Chevy AD truck Maybe you just need to learn to swear in Chinese? Here is some help http://blogs.transparent.com/chinese...ds-in-chinese/ Progress is looking good. __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project

01-07-2013, 09:43 PM	#29
xpickup Registered User Join Date: Jan 2007 Location: York, Pa. Posts: 1,386	Re: New Project Chevy AD truck 48ChevBagged, all what do you mean, those panels ALWAYS fit just right. HAHA. They always need tweaked. Looks good. Shannon __________________ 48 Panel Truck 1948 Chevy / S10 1954 Chevy / S10 1951 Chevy / C4 47 Step van Lowered 1996 Dually

01-11-2013, 02:16 PM	#30
48ChevBagged Registered User Join Date: Sep 2012 Location: Valdese NC Posts: 151	Re: New Project Chevy AD truck Got some updates on the truck been going at it pretty hard here lately. I now have all the air ride plumbed and wired up. I got to test it for the first time yesterday. I also got my engine and transmission painted and I plan on dropping it back in real soon. In the mean time I had another one follow me home. __________________ 51 Chevy Truck S-10 Chassis Bagged http://67-72chevytrucks.com/vboard/s...d.php?t=545820 49 Burb with a 5.3 LS swap http://www.67-72chevytrucks.com/vboa...d.php?t=612572 Find us on Facebook https://www.facebook.com/pages/Smitt...s/252838673654 Last edited by 48ChevBagged; 01-11-2013 at 02:24 PM.

01-11-2013, 07:39 PM	#31
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,553	Re: New Project Chevy AD truck The one that followed you home looks interesting....Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

02-08-2013, 02:59 PM	#32
48ChevBagged Registered User Join Date: Sep 2012 Location: Valdese NC Posts: 151	Re: New Project Chevy AD truck Haven't updated my thread in a while. I have still been busy working on my truck though Got some progress pics. The engine and trans are back in and the cab is back on the chassis. Dash is painted and the glass is back in. Also got my gauges mounted and the wiring is almost done. Hoping to do a test fire on the engine this weekend. __________________ 51 Chevy Truck S-10 Chassis Bagged http://67-72chevytrucks.com/vboard/s...d.php?t=545820 49 Burb with a 5.3 LS swap http://www.67-72chevytrucks.com/vboa...d.php?t=612572 Find us on Facebook https://www.facebook.com/pages/Smitt...s/252838673654

02-08-2013, 05:01 PM	#33
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,553	Re: New Project Chevy AD truck Looks like your moving along nicely, looks great...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

02-10-2013, 03:10 PM	#34
Homebuilt Hotrods Senior Member Join Date: May 2012 Location: Black Hills, SD Posts: 347	Re: New Project Chevy AD truck If you dont mind me asking did you build or buy the ls mounts for your s10 AD swap? Im thinking of doing something similiar with a 5.3 and was hoping for some input from someone who has done it. __________________ Garage Built

02-15-2013, 12:35 PM	#36
48ChevBagged Registered User Join Date: Sep 2012 Location: Valdese NC Posts: 151	Re: New Project Chevy AD truck Gonna have wheels and tires put on tomorrow. Then its time for a shake down run. After that I gotta finish my hood and put a little paint on it and its minor details from there. __________________ 51 Chevy Truck S-10 Chassis Bagged http://67-72chevytrucks.com/vboard/s...d.php?t=545820 49 Burb with a 5.3 LS swap http://www.67-72chevytrucks.com/vboa...d.php?t=612572 Find us on Facebook https://www.facebook.com/pages/Smitt...s/252838673654

02-15-2013, 02:39 PM	#37
JTRACEY Registered User Join Date: Dec 2012 Location: KCMO Posts: 36	Re: New Project Chevy AD truck Truck looks really nice! Great choice on the accuair. Are you gonna run the eLevel too?

02-15-2013, 08:20 PM	#39
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,553	Re: New Project Chevy AD truck Cool....Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

02-15-2013, 08:46 PM	#40
youngrodder Registered User Join Date: Mar 2007 Location: Scotts, Michigan Posts: 3,754	Re: New Project Chevy AD truck Looks really good. Two sweet rides (burb and truck). Marc Posted via Mobile Device __________________ …………...........__________ .................. ((__\|__\|\|___\____ ..;.;;.:;:;.,;..;((_(O))____ (_(O)) 1948 Chevy Truck - Finished SOLD!! 1953 Chevy Suburban "Family Truckster" Completed: Spring of 2021 http://67-72chevytrucks.com/vboard/s...d.php?t=605484 1994 4x4 Blazer - "Field Find" https://67-72chevytrucks.com/vboard/...ferrerid=30857

02-22-2013, 11:59 AM	#41
48ChevBagged Registered User Join Date: Sep 2012 Location: Valdese NC Posts: 151	Re: New Project Chevy AD truck Got the new wheels and tires on. Doesn't even look like the same truck. Also had a local guy here come out and pin stripe it and paint my shop logo on the door. Getting real close to being done with this truck __________________ 51 Chevy Truck S-10 Chassis Bagged http://67-72chevytrucks.com/vboard/s...d.php?t=545820 49 Burb with a 5.3 LS swap http://www.67-72chevytrucks.com/vboa...d.php?t=612572 Find us on Facebook https://www.facebook.com/pages/Smitt...s/252838673654

02-22-2013, 05:41 PM	#42
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,553	Re: New Project Chevy AD truck Wheels and tires made a big difference, looks good and so does the stripping...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

02-22-2013, 07:00 PM	#43
ACII Registered User Join Date: Jan 2010 Location: Germany Posts: 301	Re: New Project Chevy AD truck what is the manufacturer of the wheels ?? thanks



Register or Log In To remove these advertisements.

02-24-2013, 12:52 AM	#45
SSABMUD Registered User Join Date: Jul 2011 Location: Red Deer, Alberta Canada Posts: 336	Re: New Project Chevy AD truck Love your trucks. Nice work. Posted via Mobile Device __________________ Wade

04-08-2013, 06:58 PM	#47
franky69c10 chevy runs deep Join Date: Mar 2006 Location: PHOENIX AZ Posts: 1,074	Re: New Project Chevy AD truck what year and what frame do you use off a s10, me and my pops picked up a 48 wanna do what your doing.... do you use a single cab longbed s10 frame or short bed king cab.. thx __________________ RAIDER NATION 1969 c10 swb soon 2 b on the road... My LWB is a SWB now http://67-72chevytrucks.com/vboard/s...d.php?t=498241

04-11-2013, 10:20 AM	#48
48ChevBagged Registered User Join Date: Sep 2012 Location: Valdese NC Posts: 151	Re: New Project Chevy AD truck It is best to get a s10 standard cab long bed truck from 82-93. Those are the easiest to use. You can also use the steering column and the brake booster and pedals from the s10. __________________ 51 Chevy Truck S-10 Chassis Bagged http://67-72chevytrucks.com/vboard/s...d.php?t=545820 49 Burb with a 5.3 LS swap http://www.67-72chevytrucks.com/vboa...d.php?t=612572 Find us on Facebook https://www.facebook.com/pages/Smitt...s/252838673654

04-11-2013, 04:22 PM	#49
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,855	Re: New Project Chevy AD truck damn fine looking old school truck!!! __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

04-11-2013, 10:14 PM	#50
98layinframe Registered User Join Date: Oct 2011 Location: Pittsburgh Pa Posts: 267	Re: New Project Chevy AD truck What did you use to paint the interior? Looks like it has a little bit of texture to it? I really like it.. Posted via Mobile Device __________________ 91 s10 - bagged bodydropped 4", 350/700R4, narrowed reared, cantilever rear air bag setup 1951 chevy 3100 - in build/acquiring parts process. Have full C4 Corvette suspension front and rear, tpi 350, 700r4, 18" torque thrust II wheels

Register or Log In To remove these advertisements.