What did you do to your truck today part III - Page 59 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Grizz1963 · 08-21-2015, 03:26 PM

Today this was happening in England.

Any guess at what was being created?

Yes, I am excited.

Evoracer · 08-21-2015, 05:11 PM

Got my Brockmans installed!

Lugnutz65 · 08-21-2015, 05:16 PM

Quote:

Originally Posted by Grizz1963

Today this was happening in England.
Any guess at what was being created?

A rocket launcher maybe? OK, I give up.

Turtleman · 08-21-2015, 08:24 PM

Quote:

Originally Posted by Grizz1963

Today this was happening in England.

Any guess at what was being created?

Yes, I am excited.

John Deere Tractors?

Johnny_Lamebridge · 08-22-2015, 12:20 AM

Quote:

Originally Posted by Grizz1963

Any guess at what was being created?

Sparks?

**Chevy Fleetside** · 08-22-2015, 03:50 PM

I swapped out my dist today. I bought the Mallory a while back and it had a faulty module. Of course Mallory didn't care so I bought Summits kit with new coil and module. I finally put it in today. I am wondering how the truck was running with this cap. I have a feeling I was going to have total failure soon. I drove to LA and back with that Dist, 900 miles total. I also cleaned the front of the carb. It was filthy.

schpeen · 08-22-2015, 04:16 PM

Installed lokar gas pedal and new cables

Lugnutz65 · 08-22-2015, 08:30 PM

I put the rear fenders and steps on my bed! I will be driving soon baby, very soon!

Isaiah92260 · 08-22-2015, 08:38 PM

Quote:

Originally Posted by Lugnutz65

I put the rear fenders and steps on my bed! I will be driving soon baby, very soon!

Your truck looks awesome! I was thinking about painting my 63 primer buy I might rattle can mine a grayish light blue color.

Lugnutz65 · 08-22-2015, 08:48 PM

Quote:

Originally Posted by Isaiah92260

Your truck looks awesome! I was thinking about painting my 63 primer buy I might rattle can mine a grayish light blue color.

Haha! Thanks, but it's a 30 footer that needs a lot of body work. Solid drive train and suspension - all completely redone. Ready to drive. I had to put it together and reward myself. It's been 4 years and I have not driven it EVER! Except for a quickie up and down the street. Tags and plates go on next week. Then I will keep driving it as a work in progress/daily driver.

Isaiah92260 · 08-22-2015, 08:54 PM

Quote:

Originally Posted by Lugnutz65

Haha! Thanks, but it's a 30 footer that needs a lot of body work. Solid drive train and suspension - all completely redone. Ready to drive. I had to put it together and reward myself. It's been 4 years and I have not driven it EVER! Except for a quickie up and down the street. Tags and plates go on next week. Then I will keep driving it as a work in progress/daily driver.

Wow 4 years, that's good to hear that it's almost ready to hit the road! I like the work in progress daily driver! That's exactly what mine is.

Jeepers Creepers · 08-22-2015, 09:29 PM

Put a new right taillight housing on, cut out an old trailer wiring harness that looked like a four year old did it and hooked the taillights back up (still no brake lights though, left signal works but if you turn the right one on, both blink), found out I didn't have the clutch head bits I needed to replace the dimmer switch and/or get the steering wheel off to fix the turn signal, and identified a depressing amount of cab mount rust.

jbgroby · 08-22-2015, 10:37 PM

I REALLY like that pic - so cool!

Grizz1963 · 08-23-2015, 03:18 AM

Quote:

Originally Posted by Lugnutz65

A rocket launcher maybe? OK, I give up.

Quote:

Originally Posted by Turtleman

John Deere Tractors?

Quote:

Originally Posted by Johnny_Lamebridge

Sparks?

Jay, in my world that was a bloody good guess

Turtleman if my wife saw your reply, you would be banned..... I love John Deere, she hates it in principle.

When I mentioned once I really wanted to order a John Deere overall for my garage use, she said No Way. So I now wear red or blue...... It saddens me

Johnny, you were right. Sparks.

The flanges for making up my exhaust system were being lazier cut, stainless and mild steel for various parts of it.

Grizz1963 · 08-23-2015, 03:20 AM

Quote:

Originally Posted by jbgroby

I REALLY like that pic - so cool!

+ 1

Showed my wife too....... She went Aaaaaawwwwww sweet.

LT1 Burb · 08-23-2015, 10:20 AM

Quote:

Originally Posted by pimpston65

sms reproduction of the 65 style fabric, on the left and just in!!! my 10yds of NOS loving on the right... now wheres my thread???

Very nice , love NOS!!

scuderia · 08-23-2015, 10:22 AM

Saturated the OG bed wood with Linseed oil and from now on when I do an oil change the old oil the old goes in the back....

Lugnutz65 · 08-23-2015, 10:33 AM

Quote:

Originally Posted by scuderia

Saturated the OG bed wood with Linseed oil and from now on when I do an oil change the old oil the old goes in the back....

That will preserve the wood well but . . . . . . .
Anything that goes in the bed will leave with an oil stain. Can't sit down in the bed for a ride, shoes will pick up the oil, etc. Fine for hauling trash and such. One thing's for sure . . . no termites!

**TJ's Chevy** · 08-23-2015, 10:40 AM

LugNutz, Truck looks good!

Lugnutz65 · 08-23-2015, 10:47 AM

Quote:

Originally Posted by TJ's Chevy

LugNutz, Truck looks good!

Thanks TJ. Stock everything except HEI dizzy, floor shift T5 tranny, donor 250ci from a 1971 truck, Jeep Wagoneer slots, GMC hood and AAW Classic Update wiring.
SIX LUGS & SIX PLUGS - that's how I wanna roll! Gotta love the six banger.

LT1 Burb · 08-23-2015, 10:49 AM

Got some painting done, started on restoring my steering wheel , started wiring and assembling the column.

**TJ's Chevy** · 08-23-2015, 10:49 AM

Quote:

Originally Posted by Lugnutz65

Thanks TJ. Stock everything except HEI dizzy, floor shift T5 tranny, donor 250ci from a 1971 truck, Jeep Wagoneer slots, GMC hood and AAW Classic Update wiring.
SIX LUGS & SIX PLUGS - that's how I wanna roll! Gotta love the six banger.

X2! 6 in a row makes it go! lol

scanman · 08-23-2015, 02:46 PM

Quote:

Originally Posted by scuderia

Saturated the OG bed wood with Linseed oil and from now on when I do an oil change the old oil the old goes in the back....

Great pic of your truck from up there, out of the norm.

**The Rocknrod** · 08-23-2015, 05:31 PM

Installed the CPP Rear C-Notch kit:

The POL Drop Trailing arm cross-member and trans mount:

The POL engine mounts and drop shock mounts:

Jeepers Creepers · 08-23-2015, 06:31 PM

Quote:

Originally Posted by Grizz1963

+ 1

Showed my wife too....... She went Aaaaaawwwwww sweet.

Hahaha, y'all are killing me.

08-21-2015, 03:26 PM	#1451
Grizz1963 Registered User Join Date: Dec 2012 Location: Rochester, KENT Posts: 10,480	Re: What did you do to your truck today part III Today this was happening in England. Any guess at what was being created? Yes, I am excited. __________________ MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE.

08-21-2015, 05:11 PM	#1452
Evoracer Registered User Join Date: Jan 2015 Location: Anaheim, ca Posts: 120	Re: What did you do to your truck today part III Got my Brockmans installed!

08-22-2015, 03:50 PM	#1456
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,775	Re: What did you do to your truck today part III I swapped out my dist today. I bought the Mallory a while back and it had a faulty module. Of course Mallory didn't care so I bought Summits kit with new coil and module. I finally put it in today. I am wondering how the truck was running with this cap. I have a feeling I was going to have total failure soon. I drove to LA and back with that Dist, 900 miles total. I also cleaned the front of the carb. It was filthy. Attached Images __________________ "A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536

08-22-2015, 04:16 PM	#1457
schpeen Registered User Join Date: Jun 2014 Location: fort lauderdale, florida Posts: 511	Re: What did you do to your truck today part III Installed lokar gas pedal and new cables Attached Images

08-22-2015, 08:30 PM	#1458
Lugnutz65 Registered User Join Date: Jan 2013 Location: Columbia, SC Posts: 1,926	Re: What did you do to your truck today part III I put the rear fenders and steps on my bed! I will be driving soon baby, very soon! Attached Images __________________ My 65 C10 build: www.lugnutz65chevystepside.weebly.com Want to know more about T5 transmissions? My website has a T5 Info Page and a Step by Step T5 rebuild.

08-22-2015, 09:29 PM	#1462
Jeepers Creepers Registered User Join Date: Aug 2015 Location: Lawrenceville, GA Posts: 75	Re: What did you do to your truck today part III Put a new right taillight housing on, cut out an old trailer wiring harness that looked like a four year old did it and hooked the taillights back up (still no brake lights though, left signal works but if you turn the right one on, both blink), found out I didn't have the clutch head bits I needed to replace the dimmer switch and/or get the steering wheel off to fix the turn signal, and identified a depressing amount of cab mount rust. Attached Images

08-22-2015, 10:37 PM	#1463
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,768	Re: What did you do to your truck today part III I REALLY like that pic - so cool! __________________ http://s1299.photobucket.com/user/jb...23904108567829

08-23-2015, 10:22 AM	#1467
scuderia Registered User Join Date: May 2014 Location: SAN FRANCISCO Posts: 447	Re: What did you do to your truck today part III Saturated the OG bed wood with Linseed oil and from now on when I do an oil change the old oil the old goes in the back.... Attached Images __________________ '66 C10 SWB '64 C2 roadster '38 Indian Scout Flattracker '70 Triumph T120R '81 Laverda Jota

08-23-2015, 10:40 AM	#1469
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: What did you do to your truck today part III LugNutz, Truck looks good! __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

08-23-2015, 10:49 AM	#1471
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	Re: What did you do to your truck today part III Got some painting done, started on restoring my steering wheel , started wiring and assembling the column. Attached Images

08-23-2015, 05:31 PM	#1474
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: What did you do to your truck today part III Installed the CPP Rear C-Notch kit: The POL Drop Trailing arm cross-member and trans mount: The POL engine mounts and drop shock mounts: __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.