FS: 4sp Stuff - The 1947 - Present Chevrolet & GMC Truck Message Board Network

4bynut · 06-11-2005, 10:12 PM

I have some 4sp parts out of a 68 3/4 ton 2wd for sale;
The shifter, knob, and boot $30 plus shipping
The high hump w/opening $ 15 plus shipping SOLD
I also have a 4sp crossmember $15 plus shipping
4sp cast iron bell housing w/ fork $25 plus shipping
4sp flywheel $35 plus shipping
clutch and pressure plate $20 plus shipping

Thank's Jason

4bynut · 06-13-2005, 03:31 PM

Ttt!!

4bynut · 06-16-2005, 03:10 PM

Ttt!!

4bynut · 06-26-2005, 05:48 PM

Open to offers!

ole school · 06-26-2005, 06:29 PM

ill take the 4 speed hump shipping is to 37035 -tennessee

4bynut · 06-26-2005, 10:55 PM

OLE SCHOOL - I'll get you a shipping quote tomorrow. Thank's Jason

**hotrodmtodd** · 06-27-2005, 11:15 PM

Here's my offer: The shifter for as low as you can go (I busted mine IN HALF) including shipping to 15021. I learned THE HARD WAY how NOT to remove one. Mine is a SM465 if it matters. Thanks, Mike

4bynut · 06-28-2005, 03:04 PM

OK I got a couple shipping quote today. I sent you both PM's. Thank's Jason

4bynut · 07-09-2005, 02:22 AM

Ttt!!

GMC AMI · 07-09-2005, 05:59 AM

Hey Jason , do you have the lower cover for the bell housing? Thanks. Mike

4bynut · 07-09-2005, 12:59 PM

Sorry Mike, the cover was missing when I got the truck. Jason

GMC AMI · 07-10-2005, 05:55 AM

Quote:

Originally Posted by 4bynut

Sorry Mike, the cover was missing when I got the truck. Jason

Thanks Jason, I did not know if this was another truck you were selling parts from. I am still looking for one. I did not know that they were so rare!

TTT for you. Mike

4bynut · 07-16-2005, 08:53 PM

Ttt!!

4bynut · 08-04-2005, 03:41 PM

Ttt!!

4bynut · 08-14-2005, 11:27 PM

Open to Offers!!

67_C-30 · 08-14-2005, 11:56 PM

How much for just the shifter knob? Thanks,

James

**4X4GMC1972** · 08-15-2005, 10:07 AM

Do you still have the shifter?

4bynut · 08-15-2005, 12:32 PM

James- How's $15 for the knob shipped.

4X4- Yes I still have the shifter. $15 plus shipping.

Thank's Jason

**4X4GMC1972** · 08-15-2005, 02:04 PM

Jason,
Let me know on the shipping on the shifter. Do you take paypal?
Todd

4bynut · 08-16-2005, 03:35 AM

Todd, I'll get it boxed and get you a shipping quote. Sorry but I don't have a paypal account. I'll accept a postal money order though. Thank's Jason

**4X4GMC1972** · 08-18-2005, 08:15 AM

When you get the shipping quote PM it to me with your address.
Thanks
Todd

06-11-2005, 10:12 PM	#1
4bynut Senior Member Join Date: Mar 2004 Location: Morrison, IL Posts: 793	FS: 4sp Stuff (lower prices) I have some 4sp parts out of a 68 3/4 ton 2wd for sale; The shifter, knob, and boot $30 plus shipping The high hump w/opening $ 15 plus shipping SOLD I also have a 4sp crossmember $15 plus shipping 4sp cast iron bell housing w/ fork $25 plus shipping 4sp flywheel $35 plus shipping clutch and pressure plate $20 plus shipping Thank's Jason __________________ 2007 Chevy 2500HD crew cab, 4x4, duramax w/Allison trans. 2001 Chevy ZR2 Ext. cab 4x4 (DD) 1967 Chevy SWB 4x4, BBC, Th400, NP205, 6" lift, and 35's (In Process) 1970 Chevy Blazer 4x4, BBC, TH400, NP241, 6" lift, and 38.5 boggers in front, 44 boggers on the rear ( mud racer project) Last edited by 4bynut; 10-04-2007 at 09:31 PM.

06-13-2005, 03:31 PM	#2
4bynut Senior Member Join Date: Mar 2004 Location: Morrison, IL Posts: 793	Ttt!! __________________ 2007 Chevy 2500HD crew cab, 4x4, duramax w/Allison trans. 2001 Chevy ZR2 Ext. cab 4x4 (DD) 1967 Chevy SWB 4x4, BBC, Th400, NP205, 6" lift, and 35's (In Process) 1970 Chevy Blazer 4x4, BBC, TH400, NP241, 6" lift, and 38.5 boggers in front, 44 boggers on the rear ( mud racer project)

06-16-2005, 03:10 PM	#3
4bynut Senior Member Join Date: Mar 2004 Location: Morrison, IL Posts: 793	Ttt!! __________________ 2007 Chevy 2500HD crew cab, 4x4, duramax w/Allison trans. 2001 Chevy ZR2 Ext. cab 4x4 (DD) 1967 Chevy SWB 4x4, BBC, Th400, NP205, 6" lift, and 35's (In Process) 1970 Chevy Blazer 4x4, BBC, TH400, NP241, 6" lift, and 38.5 boggers in front, 44 boggers on the rear ( mud racer project)

06-26-2005, 05:48 PM	#4
4bynut Senior Member Join Date: Mar 2004 Location: Morrison, IL Posts: 793	Open to offers! __________________ 2007 Chevy 2500HD crew cab, 4x4, duramax w/Allison trans. 2001 Chevy ZR2 Ext. cab 4x4 (DD) 1967 Chevy SWB 4x4, BBC, Th400, NP205, 6" lift, and 35's (In Process) 1970 Chevy Blazer 4x4, BBC, TH400, NP241, 6" lift, and 38.5 boggers in front, 44 boggers on the rear ( mud racer project)

06-26-2005, 06:29 PM	#5
ole school Registered User Join Date: Jun 2005 Location: chapmansboro tn Posts: 29	ill take the 4 speed hump shipping is to 37035 -tennessee __________________ IT'S HARD TO MAKE CHICKEN SALAD WHEN YOUR USING CHICKEN S......... 1968 crew cab build (under construction)

06-26-2005, 10:55 PM	#6
4bynut Senior Member Join Date: Mar 2004 Location: Morrison, IL Posts: 793	OLE SCHOOL - I'll get you a shipping quote tomorrow. Thank's Jason __________________ 2007 Chevy 2500HD crew cab, 4x4, duramax w/Allison trans. 2001 Chevy ZR2 Ext. cab 4x4 (DD) 1967 Chevy SWB 4x4, BBC, Th400, NP205, 6" lift, and 35's (In Process) 1970 Chevy Blazer 4x4, BBC, TH400, NP241, 6" lift, and 38.5 boggers in front, 44 boggers on the rear ( mud racer project)

06-27-2005, 11:15 PM	#7
hotrodmtodd 'Burban Legend Join Date: Apr 2005 Location: Mingo Junction OH Posts: 916	Shifter Here's my offer: The shifter for as low as you can go (I busted mine IN HALF) including shipping to 15021. I learned THE HARD WAY how NOT to remove one. Mine is a SM465 if it matters. Thanks, Mike __________________ '67 Chevy Iron City Beer Truck (9ft step) '67 Chevy Panel Truck 467 '68 Short Fleet 305v6 '68 McLaren Ramp Truck '68/'68/'70/'71 Burbs 292/366/402/454 '69 C-30 dump '71 C-50 dump and church bus '71 4x4 454 '72 Blazer (w/pop-up camper) $15 x-hooks '66 Chevy II 194/Weber '68 El Camino" 305v6 '69 Skylark 455 Buick '70 Chevelle 427 '71 Cutlass W-31 '71 GTO 400 2x2 "The 51" Chopped '51 Chevy (409) my first car OK Toad, we'll take 'em all... John Milner

06-28-2005, 03:04 PM	#8
4bynut Senior Member Join Date: Mar 2004 Location: Morrison, IL Posts: 793	OK I got a couple shipping quote today. I sent you both PM's. Thank's Jason __________________ 2007 Chevy 2500HD crew cab, 4x4, duramax w/Allison trans. 2001 Chevy ZR2 Ext. cab 4x4 (DD) 1967 Chevy SWB 4x4, BBC, Th400, NP205, 6" lift, and 35's (In Process) 1970 Chevy Blazer 4x4, BBC, TH400, NP241, 6" lift, and 38.5 boggers in front, 44 boggers on the rear ( mud racer project)

07-09-2005, 02:22 AM	#9
4bynut Senior Member Join Date: Mar 2004 Location: Morrison, IL Posts: 793	Ttt!! __________________ 2007 Chevy 2500HD crew cab, 4x4, duramax w/Allison trans. 2001 Chevy ZR2 Ext. cab 4x4 (DD) 1967 Chevy SWB 4x4, BBC, Th400, NP205, 6" lift, and 35's (In Process) 1970 Chevy Blazer 4x4, BBC, TH400, NP241, 6" lift, and 38.5 boggers in front, 44 boggers on the rear ( mud racer project)

07-09-2005, 05:59 AM	#10
GMC AMI Registered User Join Date: Apr 2004 Location: The Other Maine! Posts: 2,236	Hey Jason , do you have the lower cover for the bell housing? Thanks. Mike __________________ 1968 Chevy 4x4 307 4 speed

07-09-2005, 12:59 PM	#11
4bynut Senior Member Join Date: Mar 2004 Location: Morrison, IL Posts: 793	Sorry Mike, the cover was missing when I got the truck. Jason __________________ 2007 Chevy 2500HD crew cab, 4x4, duramax w/Allison trans. 2001 Chevy ZR2 Ext. cab 4x4 (DD) 1967 Chevy SWB 4x4, BBC, Th400, NP205, 6" lift, and 35's (In Process) 1970 Chevy Blazer 4x4, BBC, TH400, NP241, 6" lift, and 38.5 boggers in front, 44 boggers on the rear ( mud racer project)

07-16-2005, 08:53 PM	#13
4bynut Senior Member Join Date: Mar 2004 Location: Morrison, IL Posts: 793	Ttt!! __________________ 2007 Chevy 2500HD crew cab, 4x4, duramax w/Allison trans. 2001 Chevy ZR2 Ext. cab 4x4 (DD) 1967 Chevy SWB 4x4, BBC, Th400, NP205, 6" lift, and 35's (In Process) 1970 Chevy Blazer 4x4, BBC, TH400, NP241, 6" lift, and 38.5 boggers in front, 44 boggers on the rear ( mud racer project)

08-04-2005, 03:41 PM	#14
4bynut Senior Member Join Date: Mar 2004 Location: Morrison, IL Posts: 793	Ttt!! __________________ 2007 Chevy 2500HD crew cab, 4x4, duramax w/Allison trans. 2001 Chevy ZR2 Ext. cab 4x4 (DD) 1967 Chevy SWB 4x4, BBC, Th400, NP205, 6" lift, and 35's (In Process) 1970 Chevy Blazer 4x4, BBC, TH400, NP241, 6" lift, and 38.5 boggers in front, 44 boggers on the rear ( mud racer project)

08-14-2005, 11:27 PM	#15
4bynut Senior Member Join Date: Mar 2004 Location: Morrison, IL Posts: 793	Open to Offers!! __________________ 2007 Chevy 2500HD crew cab, 4x4, duramax w/Allison trans. 2001 Chevy ZR2 Ext. cab 4x4 (DD) 1967 Chevy SWB 4x4, BBC, Th400, NP205, 6" lift, and 35's (In Process) 1970 Chevy Blazer 4x4, BBC, TH400, NP241, 6" lift, and 38.5 boggers in front, 44 boggers on the rear ( mud racer project)

08-14-2005, 11:56 PM	#16
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	How much for just the shifter knob? Thanks, James __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!



Register or Log In To remove these advertisements.

08-15-2005, 10:07 AM	#17
4X4GMC1972 Registered User Join Date: Apr 2005 Location: Dallas, Texas Posts: 506	Do you still have the shifter? __________________ 1978 Dodge Omni

08-15-2005, 12:32 PM	#18
4bynut Senior Member Join Date: Mar 2004 Location: Morrison, IL Posts: 793	James- How's $15 for the knob shipped. 4X4- Yes I still have the shifter. $15 plus shipping. Thank's Jason __________________ 2007 Chevy 2500HD crew cab, 4x4, duramax w/Allison trans. 2001 Chevy ZR2 Ext. cab 4x4 (DD) 1967 Chevy SWB 4x4, BBC, Th400, NP205, 6" lift, and 35's (In Process) 1970 Chevy Blazer 4x4, BBC, TH400, NP241, 6" lift, and 38.5 boggers in front, 44 boggers on the rear ( mud racer project)

08-15-2005, 02:04 PM	#19
4X4GMC1972 Registered User Join Date: Apr 2005 Location: Dallas, Texas Posts: 506	Jason, Let me know on the shipping on the shifter. Do you take paypal? Todd __________________ 1978 Dodge Omni

08-16-2005, 03:35 AM	#20
4bynut Senior Member Join Date: Mar 2004 Location: Morrison, IL Posts: 793	Todd, I'll get it boxed and get you a shipping quote. Sorry but I don't have a paypal account. I'll accept a postal money order though. Thank's Jason __________________ 2007 Chevy 2500HD crew cab, 4x4, duramax w/Allison trans. 2001 Chevy ZR2 Ext. cab 4x4 (DD) 1967 Chevy SWB 4x4, BBC, Th400, NP205, 6" lift, and 35's (In Process) 1970 Chevy Blazer 4x4, BBC, TH400, NP241, 6" lift, and 38.5 boggers in front, 44 boggers on the rear ( mud racer project)

08-18-2005, 08:15 AM	#21
4X4GMC1972 Registered User Join Date: Apr 2005 Location: Dallas, Texas Posts: 506	When you get the shipping quote PM it to me with your address. Thanks Todd __________________ 1978 Dodge Omni

Register or Log In To remove these advertisements.