this is my blazer - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pharcyde05 · 09-30-2006, 11:49 AM

hear it is at the beging salvaged out of a wrecking yard where it was sat and left to rust away there are a lot of future palns for her i will show every one as i go

1LoC10 · 09-30-2006, 12:23 PM

wow, that looks pretty solid for being in a junk yard... some people throw anything away

bouncytruck · 09-30-2006, 12:37 PM

Glad you saved it. Did you to the front end swap or was it like that?

Is that the rig in your avitar?

LUV2XCLR8 · 09-30-2006, 01:07 PM

Lots of potential

pharcyde05 · 09-30-2006, 02:28 PM

that is teh front end that it had the pic was taken just after washed and unloaded from trailer it had dirt leaves and all kinds of garbage built up on it

pharcyde05 · 09-30-2006, 02:29 PM

o and yea the avitar is a 91 s 10 pick up fully shaved bed

**FRENCHBLUE72** · 10-01-2006, 02:04 PM

I cannot believe you found that in a junk yard!!!!!!!

vtblazer · 10-01-2006, 06:07 PM

Quote:

Originally Posted by FRENCHBLUE72

I cannot believe you found that in a junk yard!!!!!!!

and with an early front clip too!

Welcome to the board.

krue · 10-02-2006, 11:43 AM

What're your plans?

**Yukon Jack** · 10-02-2006, 01:47 PM

Looks awfully solid! Keep us posted.

Pop's72 · 10-02-2006, 03:03 PM

Looks like a nice base for a sweet project!

pharcyde05 · 10-04-2006, 01:19 PM

by the looks of it someone else had some plans for it to someone has atemped to do alot of the body work to it they tried to shave the handels and gate i am going to start by cutting out there work and starting over all the 4x4 suspension has been tooken out and replaced with 2 wheel the frame has been cut and welded in quite a few places it might have been wrecked it looks like where the straing box mounts has been cut out and replaced the cab floor has a lil rust in it and the bed floor has a lot
so as far as my palns are finish body work, air ride suspension, drop a 327 eng with a 400 trans and paint it bright yellow alot of it is alredy in the works

pharcyde05 · 10-04-2006, 01:54 PM

Rokcrln · 10-06-2006, 07:21 AM

Nice find! So I assume it came with a salvaged title? Who do you wrk for if you don't mind me asking, I see all the metal studs in the back ground! I work for a metal framing out fit in the bay area and I just finished building the BIg League Dream Fields out in Manteca.

Kevin
LFD Inc.

pharcyde05 · 10-06-2006, 12:28 PM

i work at Sexton Chevrolet in Manteca that pic is at my dads yard modesto Lathing is the name of his company

pharcyde05 · 10-06-2006, 12:32 PM

pharcyde05 · 10-10-2006, 01:12 PM

gringoloco · 10-10-2006, 01:20 PM

Sweet. Are these current pics? How are you getting that much lift?

**Yukon Jack** · 10-10-2006, 01:48 PM

You're moving fast on this project - don't tell my Blazer, it would be very mad at me!

pharcyde05 · 10-10-2006, 01:50 PM

they are not the most curent pics that pic is before the air ride it is the hight when i got it i will get some more curent pics up soon

pharcyde05 · 10-10-2006, 01:55 PM

these are the most curent i have a lil has been done scence then i amworking on getting front clip on i had to order some parts waiting them they should be in this week i will have some more pics by the end of the weekend

*72CSTC5* · 10-10-2006, 07:15 PM

Damn dude you are not playing around are you? Looks good. Who is doing your work for you?

84 400 · 10-10-2006, 07:59 PM

wow looks really good man Really good !

pharcyde05 · 10-11-2006, 01:17 PM

i am trying to do most of the work myself so so far it has just been me and some friends and girlfriend helps out alot i try to work on it a few nights a week after work and on weekends the body and sheat metal woork takes a lot of time and it never looks like much chages but i just got my rad suport brackets so i can hopefully get front clip on this weekend i am going to have to go search for a trans crossmember so i can get that mounted in there that was all missing when i picked it up

72 2wd Blazer · 10-12-2006, 03:05 AM

Damn man, good work. It's coming along great.

09-30-2006, 11:49 AM	#1
pharcyde05 Senior Member Join Date: Mar 2006 Location: modesto CA Posts: 239	this is my blazer hear it is at the beging salvaged out of a wrecking yard where it was sat and left to rust away there are a lot of future palns for her i will show every one as i go __________________ http://www.cardomain.com/ride/2461088

09-30-2006, 12:23 PM	#2
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: this is my blazer wow, that looks pretty solid for being in a junk yard... some people throw anything away __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

09-30-2006, 12:37 PM	#3
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	Re: this is my blazer Glad you saved it. Did you to the front end swap or was it like that? Is that the rig in your avitar? __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

09-30-2006, 01:07 PM	#4
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	Re: this is my blazer Lots of potential __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

09-30-2006, 02:28 PM	#5
pharcyde05 Senior Member Join Date: Mar 2006 Location: modesto CA Posts: 239	Re: this is my blazer that is teh front end that it had the pic was taken just after washed and unloaded from trailer it had dirt leaves and all kinds of garbage built up on it __________________ http://www.cardomain.com/ride/2461088

09-30-2006, 02:29 PM	#6
pharcyde05 Senior Member Join Date: Mar 2006 Location: modesto CA Posts: 239	Re: this is my blazer o and yea the avitar is a 91 s 10 pick up fully shaved bed __________________ http://www.cardomain.com/ride/2461088

10-01-2006, 02:04 PM	#7
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: this is my blazer I cannot believe you found that in a junk yard!!!!!!! __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

10-02-2006, 11:43 AM	#9
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: this is my blazer What're your plans? __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

10-02-2006, 01:47 PM	#10
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Re: this is my blazer Looks awfully solid! Keep us posted. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

10-02-2006, 03:03 PM	#11
Pop's72 It's ok to stare... Join Date: Dec 2004 Location: San Jose, CA Posts: 669	Re: this is my blazer Looks like a nice base for a sweet project! __________________ -Matt 1971 Blazer/Jimmy : Factory 2WD, Factory AC, Crate 350

10-04-2006, 01:19 PM	#12
pharcyde05 Senior Member Join Date: Mar 2006 Location: modesto CA Posts: 239	Re: this is my blazer by the looks of it someone else had some plans for it to someone has atemped to do alot of the body work to it they tried to shave the handels and gate i am going to start by cutting out there work and starting over all the 4x4 suspension has been tooken out and replaced with 2 wheel the frame has been cut and welded in quite a few places it might have been wrecked it looks like where the straing box mounts has been cut out and replaced the cab floor has a lil rust in it and the bed floor has a lot so as far as my palns are finish body work, air ride suspension, drop a 327 eng with a 400 trans and paint it bright yellow alot of it is alredy in the works __________________ http://www.cardomain.com/ride/2461088

10-04-2006, 01:54 PM	#13
pharcyde05 Senior Member Join Date: Mar 2006 Location: modesto CA Posts: 239	Re: this is my blazer __________________ http://www.cardomain.com/ride/2461088

10-06-2006, 07:21 AM	#14
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: this is my blazer Nice find! So I assume it came with a salvaged title? Who do you wrk for if you don't mind me asking, I see all the metal studs in the back ground! I work for a metal framing out fit in the bay area and I just finished building the BIg League Dream Fields out in Manteca. Kevin LFD Inc.

10-06-2006, 12:28 PM	#15
pharcyde05 Senior Member Join Date: Mar 2006 Location: modesto CA Posts: 239	Re: this is my blazer i work at Sexton Chevrolet in Manteca that pic is at my dads yard modesto Lathing is the name of his company __________________ http://www.cardomain.com/ride/2461088

10-06-2006, 12:32 PM	#16
pharcyde05 Senior Member Join Date: Mar 2006 Location: modesto CA Posts: 239	Re: this is my blazer __________________ http://www.cardomain.com/ride/2461088



Register or Log In To remove these advertisements.

10-10-2006, 01:12 PM	#17
pharcyde05 Senior Member Join Date: Mar 2006 Location: modesto CA Posts: 239	Re: this is my blazer __________________ http://www.cardomain.com/ride/2461088

10-10-2006, 01:20 PM	#18
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: this is my blazer Sweet. Are these current pics? How are you getting that much lift? __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

10-10-2006, 01:48 PM	#19
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Re: this is my blazer You're moving fast on this project - don't tell my Blazer, it would be very mad at me! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

10-10-2006, 01:50 PM	#20
pharcyde05 Senior Member Join Date: Mar 2006 Location: modesto CA Posts: 239	Re: this is my blazer they are not the most curent pics that pic is before the air ride it is the hight when i got it i will get some more curent pics up soon __________________ http://www.cardomain.com/ride/2461088

10-10-2006, 01:55 PM	#21
pharcyde05 Senior Member Join Date: Mar 2006 Location: modesto CA Posts: 239	Re: this is my blazer these are the most curent i have a lil has been done scence then i amworking on getting front clip on i had to order some parts waiting them they should be in this week i will have some more pics by the end of the weekend __________________ http://www.cardomain.com/ride/2461088

10-10-2006, 07:15 PM	#22
72CSTC5 Account Suspended Join Date: Nov 2004 Location: Deer Park, Tx. Posts: 2,524	Re: this is my blazer Damn dude you are not playing around are you? Looks good. Who is doing your work for you?

10-10-2006, 07:59 PM	#23
84 400 Sb 400 club Join Date: Nov 2005 Location: NH / MA Posts: 2,741	Re: this is my blazer wow looks really good man Really good ! __________________ 1984 chevy c10, built 400sb,.(SOLD) 77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out

10-11-2006, 01:17 PM	#24
pharcyde05 Senior Member Join Date: Mar 2006 Location: modesto CA Posts: 239	Re: this is my blazer i am trying to do most of the work myself so so far it has just been me and some friends and girlfriend helps out alot i try to work on it a few nights a week after work and on weekends the body and sheat metal woork takes a lot of time and it never looks like much chages but i just got my rad suport brackets so i can hopefully get front clip on this weekend i am going to have to go search for a trans crossmember so i can get that mounted in there that was all missing when i picked it up __________________ http://www.cardomain.com/ride/2461088

10-12-2006, 03:05 AM	#25
72 2wd Blazer Get Down! Join Date: Mar 2003 Location: Sacramento, CA Posts: 89	Re: this is my blazer Damn man, good work. It's coming along great.

Register or Log In To remove these advertisements.