Parting out 71 cheyenne 1/2 LWB 4x4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**WIDESIDE72** · 12-11-2008, 09:20 PM

I am parting out a 71 Cheyenne. All of the good Cheyenne stuff is long gone. I do have a few things that I think I will not hau lto the scrap yard. Here is a quick run down of what I have:

Set of so so 71 Cheyenne doors, with glass pass is missing regulator, has chrome vent windows, no dents on outside of driver door, one dent on outside of pass door, some rust in bottoms on both, someone brazed cracked area around hinge mount on driver door, looks like a decent fix, driver has cracked inner skin at to near glass and rust at both bottom corners. These look really nice on the outside and I think they could be saved.They appear to have original paint and no bondo. I cleaned up the surface rust on the bottoms and sprayed the with some WD40. See pics for details. $100 for the pair, due to the fact that they both still have everything but the pass door regulator.

I also have the following that I will post pics of tomorrow:

SOLD Disc front brake equipped LWB 1/2 ton 4x4 running gear with Superlift 4" lift, 2 pretty new 33 x 12.50x 15 tires 4 wagon spoke wheels, Np205 (I think) transfer case (no case to trans adapter plate), but has good front and rear drive shafts rusty cab and bed sitting on it, clear title VIN of the truck says it was a 2wd, so I suppose it was a body swap at sometime. SOLD

Inside and out AC evaporator box metal rusty inside, heater core missing $40
good power brake booster, with all brackets and master cylinder worked when I drove it $60
auto trans brake pedal $30
foot emergency brake $15
SOLD pretty good dk grn full set of lap belts SOLD
SOLD non tach dash/ guages SOLD
SOLD auto non tilt steering column SOLD
No motor or trans, no PS alt or AC brackets, but a few other odds and ends. Let me know what you need and I will get back to you.

**WIDESIDE72** · 12-11-2008, 09:22 PM

More pics of doors

**WIDESIDE72** · 12-11-2008, 09:24 PM

71 doors

**WIDESIDE72** · 12-11-2008, 09:25 PM

door details

**WIDESIDE72** · 12-11-2008, 09:31 PM

Last door pic and a pic of the truck beforethe "part outparty" started

blue714x4 · 12-11-2008, 10:22 PM

any chance you have a extra yoke thats connects the trans to the rear drive shaft?

sleepertruck72 · 12-11-2008, 10:35 PM

Is the tailgate band in decent shape ? how much shipped to 95380 ? Thanks

**Ricks1971** · 12-11-2008, 11:01 PM

Do you have the glovebox?

blue714x4 · 12-12-2008, 12:10 AM

hope yu have not spent anytime looking into having a spare yoke. I am good to go.

Thanks

Bpokey · 12-12-2008, 01:31 AM

What are the condition of the tail lights? Also need driver quality outside door handles. Shipping to 32506.

**WIDESIDE72** · 12-12-2008, 12:39 PM

No extra yoke, the tailgate band is petty bad,not worth shipping IMO. Do you mean the glove box DOOR? Since I have a title, this one goes w/the cab VIN plate and title and I am not splitting them up. I have another glovebox door from a C/10 if you need one. $20 + shipping. I pulled taillights for another truck. These door handles go with doors. I don't have time to pull them off. I will see if I have another set.

**Ricks1971** · 12-12-2008, 09:49 PM

I really don't need the glove box door just a good pic of it. The reason being I am restoring a 71 cheyenne 10 and the glove box tag was gone. So I was going to get a aftermarket tag and get the correct order of a cheyenne 10.

chipflyer · 12-12-2008, 11:11 PM

Any chance the rear emergency brake cables are any good?

Jeff

9teen69 · 12-12-2008, 11:23 PM

What kind of shape is the steering column in?

78ChevySilverado · 12-13-2008, 12:06 AM

I need a 6 lug rearend for my 4x4 '72 blazer, do you have one available?

Also would like 4x4 framerails from firewall forward if straight or whole frame if priced right

Let me know I'm looking to purchase these items asap!

STOCKISH · 12-13-2008, 12:20 AM

Any chance the core support is rust free? How much and are you willing to ship to 27523

blazer72 · 12-13-2008, 12:21 AM

I need this - not sure what it's technical name is. There's a circle and arrow around it. It's the bar that goes across the front end and connects at both sides. I really feel ignorant right now.

**WIDESIDE72** · 12-13-2008, 04:06 PM

Quote:

Originally Posted by chipflyer

Any chance the rear emergency brake cables are any good?

Jeff

Sorry, no. Somone rigged them to work with some cable and clamps

**WIDESIDE72** · 12-13-2008, 04:08 PM

Quote:

Originally Posted by blazer72

I need this - not sure what it's technical name is. There's a circle and arrow around it. It's the bar that goes across the front end and connects at both sides. I really feel ignorant right now.

Is it a frame brace? I won't cut that off,as I am selling chassis as complete as possible

**WIDESIDE72** · 12-13-2008, 04:09 PM

Quote:

Originally Posted by 1972SuperCheyenne

Any chance the core support is rust free? How much and are you willing to ship to 27523

As is typical, whole area under battery is gone. Rest is nice. I was going to hang on to and make a patch and use on my "driver". Still interested?

**WIDESIDE72** · 12-13-2008, 04:13 PM

Quote:

Originally Posted by WIDESIDE72

Is it a frame brace? I won't cut that off,as I am selling chassis as complete as possible

You probably mean the center link for steering (?) this is a wear part. This one was pretty worn out. In the interest of safety, I would recommend buying new. I am leaving this one in order for buyer to be able to steer when loading

**WIDESIDE72** · 12-13-2008, 04:15 PM

Quote:

Originally Posted by 78ChevySilverado

I need a 6 lug rearend for my 4x4 '72 blazer, do you have one available?

Also would like 4x4 framerails from firewall forward if straight or whole frame if priced right

Let me know I'm looking to purchase these items asap!

$800 for rolling chassis, rusty cab, so so LWB bed sides, rusted out bed floor, sorry, not parting any further

**WIDESIDE72** · 12-13-2008, 04:19 PM

Quote:

Originally Posted by 9teen69

What kind of shape is the steering column in?

I am not pulling this column, in order for buyer to be able to loasd as easy as possible. I have another 71 or 72 pickup auto non tilt steering column (only, wheel will be removed as it is toast)$30 + shipping.

**WIDESIDE72** · 12-13-2008, 04:20 PM

Quote:

Originally Posted by Ricks1971

I really don't need the glove box door just a good pic of it. The reason being I am restoring a 71 cheyenne 10 and the glove box tag was gone. So I was going to get a aftermarket tag and get the correct order of a cheyenne 10.

I have not taken a pic of the SPID yet, but the next time I am out w/ the camera, I will try to remember to take a pic and send it to you.

**WIDESIDE72** · 12-13-2008, 04:24 PM

Disc front brake equipped LWB 1/2 ton 4x4 running gear with Superlift 4" lift, 2 pretty new 33 x 12.50x 15 tires 4 wagon spoke wheels, Np205 (I think correct me if I am wrong) transfer case, has front and rear drive shafts rusty cab and bed sitting on it, clear title VIN of the truck says it was a 2wd, so I suppose it was a body swap at sometime. $800

12-11-2008, 09:20 PM	#1
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Parting out 71 cheyenne 1/2 LWB 4x4 I am parting out a 71 Cheyenne. All of the good Cheyenne stuff is long gone. I do have a few things that I think I will not hau lto the scrap yard. Here is a quick run down of what I have: Set of so so 71 Cheyenne doors, with glass pass is missing regulator, has chrome vent windows, no dents on outside of driver door, one dent on outside of pass door, some rust in bottoms on both, someone brazed cracked area around hinge mount on driver door, looks like a decent fix, driver has cracked inner skin at to near glass and rust at both bottom corners. These look really nice on the outside and I think they could be saved.They appear to have original paint and no bondo. I cleaned up the surface rust on the bottoms and sprayed the with some WD40. See pics for details. $100 for the pair, due to the fact that they both still have everything but the pass door regulator. I also have the following that I will post pics of tomorrow: SOLD Disc front brake equipped LWB 1/2 ton 4x4 running gear with Superlift 4" lift, 2 pretty new 33 x 12.50x 15 tires 4 wagon spoke wheels, Np205 (I think) transfer case (no case to trans adapter plate), but has good front and rear drive shafts rusty cab and bed sitting on it, clear title VIN of the truck says it was a 2wd, so I suppose it was a body swap at sometime. SOLD Inside and out AC evaporator box metal rusty inside, heater core missing $40 good power brake booster, with all brackets and master cylinder worked when I drove it $60 auto trans brake pedal $30 foot emergency brake $15 SOLD pretty good dk grn full set of lap belts SOLD SOLD non tach dash/ guages SOLD SOLD auto non tilt steering column SOLD No motor or trans, no PS alt or AC brackets, but a few other odds and ends. Let me know what you need and I will get back to you. Attached Images Last edited by WIDESIDE72; 10-12-2010 at 05:39 PM.

12-11-2008, 09:22 PM	#2
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: Parting out 71 cheyenne 1/2 LWB 4x4 More pics of doors Attached Images

12-11-2008, 09:24 PM	#3
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: Parting out 71 cheyenne 1/2 LWB 4x4 71 doors Attached Images

12-11-2008, 09:25 PM	#4
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: Parting out 71 cheyenne 1/2 LWB 4x4 door details Attached Images Last edited by WIDESIDE72; 12-11-2008 at 09:28 PM.

12-11-2008, 09:31 PM	#5
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: Parting out 71 cheyenne 1/2 LWB 4x4 Last door pic and a pic of the truck beforethe "part outparty" started Attached Images

12-11-2008, 10:22 PM	#6
blue714x4 Registered User Join Date: Mar 2008 Location: Washington, DC Posts: 7	Re: Parting out 71 cheyenne 1/2 LWB 4x4 any chance you have a extra yoke thats connects the trans to the rear drive shaft?

12-11-2008, 10:35 PM	#7
sleepertruck72 Registered User Join Date: Nov 2007 Location: Turlock California 95380 Posts: 2,075	Re: Parting out 71 cheyenne 1/2 LWB 4x4 Is the tailgate band in decent shape ? how much shipped to 95380 ? Thanks __________________ 72 C20 Longbed 05 1500 Z71

12-11-2008, 11:01 PM	#8
Ricks1971 Senior Member Join Date: Mar 2006 Location: Clarkrange Tennessee Posts: 1,781	Re: Parting out 71 cheyenne 1/2 LWB 4x4 Do you have the glovebox?

12-12-2008, 12:10 AM	#9
blue714x4 Registered User Join Date: Mar 2008 Location: Washington, DC Posts: 7	Re: Parting out 71 cheyenne 1/2 LWB 4x4 hope yu have not spent anytime looking into having a spare yoke. I am good to go. Thanks

12-12-2008, 01:31 AM	#10
Bpokey Registered User Join Date: Sep 2008 Location: Belle Chasse LA Posts: 147	Re: Parting out 71 cheyenne 1/2 LWB 4x4 What are the condition of the tail lights? Also need driver quality outside door handles. Shipping to 32506.

12-12-2008, 12:39 PM	#11
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: Parting out 71 cheyenne 1/2 LWB 4x4 No extra yoke, the tailgate band is petty bad,not worth shipping IMO. Do you mean the glove box DOOR? Since I have a title, this one goes w/the cab VIN plate and title and I am not splitting them up. I have another glovebox door from a C/10 if you need one. $20 + shipping. I pulled taillights for another truck. These door handles go with doors. I don't have time to pull them off. I will see if I have another set.

12-12-2008, 09:49 PM	#12
Ricks1971 Senior Member Join Date: Mar 2006 Location: Clarkrange Tennessee Posts: 1,781	Re: Parting out 71 cheyenne 1/2 LWB 4x4 I really don't need the glove box door just a good pic of it. The reason being I am restoring a 71 cheyenne 10 and the glove box tag was gone. So I was going to get a aftermarket tag and get the correct order of a cheyenne 10.

12-12-2008, 11:11 PM	#13
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: Parting out 71 cheyenne 1/2 LWB 4x4 Any chance the rear emergency brake cables are any good? Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

12-12-2008, 11:23 PM	#14
9teen69 Registered User Join Date: Sep 2002 Location: Austin, Texas Posts: 1,048	Re: Parting out 71 cheyenne 1/2 LWB 4x4 What kind of shape is the steering column in? __________________ 72 Cheyenne SWB C10 (daily driver) (Super fake cause I just love the glovebox emblem) 70 Camaro RS (frame-off in pieces) 70 Camaro RS (daily driver backup) 69 Custom LWB C10 (son now drives)

12-13-2008, 12:06 AM	#15
78ChevySilverado I love my Chevys Join Date: Jun 2004 Location: Montgomery, Texas Posts: 236	Re: Parting out 71 cheyenne 1/2 LWB 4x4 I need a 6 lug rearend for my 4x4 '72 blazer, do you have one available? Also would like 4x4 framerails from firewall forward if straight or whole frame if priced right Let me know I'm looking to purchase these items asap!



Register or Log In To remove these advertisements.

12-13-2008, 12:20 AM	#16
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Parting out 71 cheyenne 1/2 LWB 4x4 Any chance the core support is rust free? How much and are you willing to ship to 27523 __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

12-13-2008, 12:21 AM	#17
blazer72 Freedom isn't Free Join Date: Oct 2006 Location: OKC Posts: 393	Re: Parting out 71 cheyenne 1/2 LWB 4x4 I need this - not sure what it's technical name is. There's a circle and arrow around it. It's the bar that goes across the front end and connects at both sides. I really feel ignorant right now. Attached Images

12-13-2008, 04:24 PM	#25
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: Parting out 71 cheyenne 1/2 LWB 4x4 Disc front brake equipped LWB 1/2 ton 4x4 running gear with Superlift 4" lift, 2 pretty new 33 x 12.50x 15 tires 4 wagon spoke wheels, Np205 (I think correct me if I am wrong) transfer case, has front and rear drive shafts rusty cab and bed sitting on it, clear title VIN of the truck says it was a 2wd, so I suppose it was a body swap at sometime. $800 Attached Images Last edited by WIDESIDE72; 12-13-2008 at 04:25 PM.

Register or Log In To remove these advertisements.