Parting a 1966 Chevrolet Panel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Eagletucky · 06-16-2009, 01:54 PM

I just picked up a 66 panel this weekend. I was thinking of fixing it up, but have since come to the conclusion that rust has completely engulfed the truck, it isnt salvageable. However, there are a number of good parts on it. The dash is complete and uncut. The hood is in good shape only surface rust. It has factory bucket seats, all of the mounting hardware is there. The seats are in pretty good condition.

I cant ship big stuff like the hood or seats, so that kind of stuff will have to be pickup only, but I will ship smaller stuff.

Hit me with a PM if you are looking for anything. My digital camera is broken, hopefully I'll have a new one soon. If you want a pic of something, I'll borrow a camera.

Thanks is advance,

Eagletucky · 06-17-2009, 09:42 AM

Sorry to bump so quick, I just wanted to clear a few things up.

The body on this is completely shot. The only panel that doesnt have gaping holes in it is the hood, which must have come from another truck.

Floors, fenders, roof, doors, bumpers......gone, unuseable.

I do have a clear title for it.

Thanks in advance....

Byronic · 06-17-2009, 02:41 PM

PM sent.

teamcosmo · 06-22-2009, 09:46 PM

Do you have all the pedals and brackets and push rod for the master cylinder? Im also looking for the parts that hold the stearing colum up and in placee

Eagletucky · 06-23-2009, 08:51 PM

Here are a few pics I took of the seats and hood today..

Eagletucky · 06-23-2009, 08:54 PM

And a few more...

And Here is the panel in all its glory....

49m · 06-23-2009, 11:11 PM

how much for the hood? need anything on trade?

49m · 06-23-2009, 11:15 PM

v8 or v6. i need v8 motor perches

Eagletucky · 06-23-2009, 11:48 PM

Its an inline 6. Sorry.

Eagletucky · 06-23-2009, 11:51 PM

$100 on the hood. I cant think of anything I need. PM me.

joe231 · 06-24-2009, 12:21 PM

Quote:

Originally Posted by 49m

v8 or v6. i need v8 motor perches

Chevy didn't have a V-6

Quote:

Originally Posted by Eagletucky

Its an inline 6. Sorry.

as long as it isn't a 292, the engine perches are the same for the inlines and the V-8's
you can tell if it is a 292 by the offset motor mounts, they won't be directly across from each other...

Eagletucky · 06-24-2009, 01:12 PM

I wasnt sure what motor it was. I'll check and let you know.

johnnykool1 · 06-24-2009, 09:17 PM

PM sent. Later - johnny

Eagletucky · 07-01-2009, 05:43 PM

Back up.

Still have the seats and the hood. I cut the truck up last weekend and saved all of the parts that were any good (not much).

**aerotruk63** · 07-02-2009, 06:31 PM

Seats are nice would really like to put them in my 66 4X4. To bad your so far away.

USSkoval · 07-05-2009, 07:19 PM

Possibly interested in the hood. Still have a carb for the 6 cyl?

Eagletucky · 07-10-2009, 01:43 PM

Not much left of the truck now. Here is what I have left:

complete frame and all front end steering components. I have a rear end, but its from a 61 chevy. $100.00

250 inline 6 with 3 speed trans. Complete from carb to oilpan. Condition unknown. $50.00

Thats about it.

Thanks,

scrapiron64 · 07-10-2009, 06:46 PM

How much for the seats?

scrapiron64 · 07-10-2009, 07:07 PM

Sorry to be so impatient, but I am going to be at the Super Chevy show tomorrow. If we could agree on a price I could pick them up.

06-16-2009, 01:54 PM	#1
Eagletucky Where did THAT bolt go? Join Date: Feb 2009 Location: Speedway, Indiana Posts: 306	Parting a 1966 Chevrolet Panel I just picked up a 66 panel this weekend. I was thinking of fixing it up, but have since come to the conclusion that rust has completely engulfed the truck, it isnt salvageable. However, there are a number of good parts on it. The dash is complete and uncut. The hood is in good shape only surface rust. It has factory bucket seats, all of the mounting hardware is there. The seats are in pretty good condition. I cant ship big stuff like the hood or seats, so that kind of stuff will have to be pickup only, but I will ship smaller stuff. Hit me with a PM if you are looking for anything. My digital camera is broken, hopefully I'll have a new one soon. If you want a pic of something, I'll borrow a camera. Thanks is advance, __________________ The Swiss Car Club......A drinking club with a car problem....

06-17-2009, 09:42 AM	#2
Eagletucky Where did THAT bolt go? Join Date: Feb 2009 Location: Speedway, Indiana Posts: 306	Re: Parting a 1966 Chevrolet Panel Sorry to bump so quick, I just wanted to clear a few things up. The body on this is completely shot. The only panel that doesnt have gaping holes in it is the hood, which must have come from another truck. Floors, fenders, roof, doors, bumpers......gone, unuseable. I do have a clear title for it. Thanks in advance.... __________________ The Swiss Car Club......A drinking club with a car problem.... Last edited by Eagletucky; 06-17-2009 at 09:44 AM.

06-17-2009, 02:41 PM	#3
Byronic The Beach Cruiser Join Date: May 2009 Location: Panama City, Florida Posts: 358	Re: Parting a 1966 Chevrolet Panel PM sent. __________________ 1999 Silverado DD 1966 Panel Truck 2003 Harley Road Glide 1967 Schwinn Tandem Single Speed

06-22-2009, 09:46 PM	#4
teamcosmo Registered User Join Date: May 2009 Location: south portland, maine Posts: 20	Re: Parting a 1966 Chevrolet Panel Do you have all the pedals and brackets and push rod for the master cylinder? Im also looking for the parts that hold the stearing colum up and in placee

06-23-2009, 08:51 PM	#5
Eagletucky Where did THAT bolt go? Join Date: Feb 2009 Location: Speedway, Indiana Posts: 306	Re: Parting a 1966 Chevrolet Panel Here are a few pics I took of the seats and hood today.. __________________ The Swiss Car Club......A drinking club with a car problem....

06-23-2009, 08:54 PM	#6
Eagletucky Where did THAT bolt go? Join Date: Feb 2009 Location: Speedway, Indiana Posts: 306	Re: Parting a 1966 Chevrolet Panel And a few more... And Here is the panel in all its glory.... __________________ The Swiss Car Club......A drinking club with a car problem....

06-23-2009, 11:11 PM	#7
49m Registered User Join Date: Aug 2007 Location: Turners Station,Ky Posts: 842	Re: Parting a 1966 Chevrolet Panel how much for the hood? need anything on trade? __________________ My Rides 1969 Mustang gt coupe 1971 Chevy Cheyenne 1986 Iroc camaro 1986 K10 Short Bed 1987 Iroc Camaro 1990 rs Camaro 1992 350 ss truck 1998 Honda Civic 2005 Ram 2500 Cummins My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=279831

06-23-2009, 11:15 PM	#8
49m Registered User Join Date: Aug 2007 Location: Turners Station,Ky Posts: 842	Re: Parting a 1966 Chevrolet Panel v8 or v6. i need v8 motor perches __________________ My Rides 1969 Mustang gt coupe 1971 Chevy Cheyenne 1986 Iroc camaro 1986 K10 Short Bed 1987 Iroc Camaro 1990 rs Camaro 1992 350 ss truck 1998 Honda Civic 2005 Ram 2500 Cummins My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=279831

06-23-2009, 11:48 PM	#9
Eagletucky Where did THAT bolt go? Join Date: Feb 2009 Location: Speedway, Indiana Posts: 306	Re: Parting a 1966 Chevrolet Panel Its an inline 6. Sorry. __________________ The Swiss Car Club......A drinking club with a car problem....

06-23-2009, 11:51 PM	#10
Eagletucky Where did THAT bolt go? Join Date: Feb 2009 Location: Speedway, Indiana Posts: 306	Re: Parting a 1966 Chevrolet Panel $100 on the hood. I cant think of anything I need. PM me. __________________ The Swiss Car Club......A drinking club with a car problem....

06-24-2009, 01:12 PM	#12
Eagletucky Where did THAT bolt go? Join Date: Feb 2009 Location: Speedway, Indiana Posts: 306	Re: Parting a 1966 Chevrolet Panel I wasnt sure what motor it was. I'll check and let you know. __________________ The Swiss Car Club......A drinking club with a car problem....

06-24-2009, 09:17 PM	#13
johnnykool1 Registered User Join Date: Jun 2004 Location: upstate south carolina Posts: 12	Re: Parting a 1966 Chevrolet Panel PM sent. Later - johnny

07-01-2009, 05:43 PM	#14
Eagletucky Where did THAT bolt go? Join Date: Feb 2009 Location: Speedway, Indiana Posts: 306	Re: Parting a 1966 Chevrolet Panel Back up. Still have the seats and the hood. I cut the truck up last weekend and saved all of the parts that were any good (not much). __________________ The Swiss Car Club......A drinking club with a car problem....

07-02-2009, 06:31 PM	#15
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: Parting a 1966 Chevrolet Panel Seats are nice would really like to put them in my 66 4X4. To bad your so far away. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

07-05-2009, 07:19 PM	#16
USSkoval Registered User Join Date: Jul 2009 Location: West Jefferson, OH Posts: 999	Re: Parting a 1966 Chevrolet Panel Possibly interested in the hood. Still have a carb for the 6 cyl?



Register or Log In To remove these advertisements.

07-10-2009, 01:43 PM	#17
Eagletucky Where did THAT bolt go? Join Date: Feb 2009 Location: Speedway, Indiana Posts: 306	Re: Parting a 1966 Chevrolet Panel Not much left of the truck now. Here is what I have left: complete frame and all front end steering components. I have a rear end, but its from a 61 chevy. $100.00 250 inline 6 with 3 speed trans. Complete from carb to oilpan. Condition unknown. $50.00 Thats about it. Thanks, __________________ The Swiss Car Club......A drinking club with a car problem....

07-10-2009, 06:46 PM	#18
scrapiron64 Registered User Join Date: Jul 2009 Location: Elberfeld, In Posts: 5	Re: Parting a 1966 Chevrolet Panel How much for the seats?

07-10-2009, 07:07 PM	#19
scrapiron64 Registered User Join Date: Jul 2009 Location: Elberfeld, In Posts: 5	Re: Parting a 1966 Chevrolet Panel Sorry to be so impatient, but I am going to be at the Super Chevy show tomorrow. If we could agree on a price I could pick them up.

Register or Log In To remove these advertisements.