What are your plans for your truck this year? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mikep · 03-02-2003, 01:59 PM

I recently picked up a gas mileage truck so I can get really stupid with the 68 as far as engine mods go. I have a few things I'd like to get accomplished this year . Mine are in their proper order ...

1. New heads. I'm looking at the pro action 200 cc lightning heads with 64 cc chambers to give me 11:1 compression with my domed pistons.

2. 4.30 to 4.88 gears. Havent decided which yet .

3. 4 Wheel disks . The old drums work great but I figure I can get 4 wheel disks done for $500 or so which is budget.

What are your plans this year ?

miket · 03-02-2003, 02:07 PM

New turbo 400 in a week...

New rear end gears and posi...3.08/2.73

New ZZ502

New 3" exhuast and flowmasters...

New Tach Dash...

New Bedliner and cover...

New Paint... (get rid of ugly fuel doors and tanks)

Maybe a 4/6 drop...

Mikep, wanna help?

Locutus · 03-02-2003, 02:16 PM

Replace cab
custom stereo install with 2 12" subs
TPI Fuel injection w/ Holly commander 950 contol module and ported intake,plenum and siamesed runners.
Paint
Ball joints, front springs and power steering(have pump and steering box need to find bracket)
Possible Manual 6 speed conversion or 700r4
???Maybe convert short bed to long bed??? any done that conversion yet?
A/C conversion(stock or aftermark)

Mainly I want to get this up to being a nice daily driver that I won't be ashamed to have parked out front but that I wouldn't be afraid to haul around parts or my race car.

**Canadian694x4** · 03-02-2003, 02:40 PM

By the Fall I hope to have the money for a new paint job and engine rebuild...she's fine now, but she'll be due by Fall.

GMC71k20 · 03-02-2003, 02:44 PM

the GMC is at the bodyshop right now, should get it back in mid-late april with new hugger orange paint and new grill
gonna swithc the 4" inch lift out with a 6" skyjacker lift and then im gonna drive the hell out of it.

lukecp · 03-02-2003, 02:52 PM

Mine should be all performance upgrades, depending on how much money i make this summer. I plan to replace my stock heads with either a set of 65cc bowl-ported 2.02/1.60 GM heads, or a set of Vortec heads, add a Performer RPM intake manifold, H-pipe on my exhaust, stage 2 shift kit to the tranny, and possibly a Comp XE262 cam, and fix all the oil leaks while i have my motor apart. Then the truck should be running deep into the 14 second range, which would give me bragging rights over some fox-body mustangs, 3rd gen Camaros, and most rice burners

.

Lowerd1 · 03-02-2003, 02:58 PM

1.Buy one this week

2.Fix the rusted out Rocker Panels

3.Raise the front back up since somebody lowered it.

4.Finish the wireing.

5.Put my subs and Amp in.

6.RhinoLiner the Bed,

7.Stock Wheels back on it.

Thats about it.

Blue_71 · 03-02-2003, 03:14 PM

4x4--
fix the brakes, fix the rust, sand to bare metal, primer, and if i get lucky paint it, and new cam
2wd--
finish the paint, and put the motor and 4 speed in

Mudder · 03-02-2003, 03:18 PM

I'm instaling a new Optima battery right now(waiting for paint to dry). Then later this evening its going to the body shop.

Cargo light
Removing front and rear glass. (Checking out front and puttting in different rear slider)
Gonna paint the frame and axles
Sand and buff fenders and doors
New Carpet
Upgrade stereo
Aftermarket gauges
Maybe a new front bumper if I get that far.
Etc..........

imaindianoutlaw · 03-02-2003, 03:28 PM

well first I need to get the passenger rocker replaced and the cab mounts redone. Get a new mirror and get the heater working with new defrost ducks! Then its time for Mickey Thompson classic II's 16/8 and 16/10 and bfgs hopefully before winter! Going on a cruise and need to save money!

Purs · 03-02-2003, 03:49 PM

paint it and sell it (or trade...) then find me a 72 Jimmy or a Blazer!

**Palf70Step** · 03-02-2003, 03:55 PM

Mostly....Assembled...
I hope to have most of the body work and interrior up grades done.

New 275/60 tires.

If I'm lucky and the funds are there...maybe even paint.

*racedvl* · 03-02-2003, 04:03 PM

For sure install new engine.

Maybe install front disk cross member.

If I install the crossmember, I will install the 72 rear end I have, and power brakes.

Wash it. LOL

weasel29gm · 03-02-2003, 04:33 PM

Hopefully finish the body and paint, install the fresh .040 350 and 350 Turbo. Get the little stuff I need and have on the road by May or June.

The Terminator · 03-02-2003, 04:41 PM

I would like to paint the bed, and finish the interior. The interior needs:

Sound deadener and carpet,

door panels

a new dash interior

a dash pad

lights in the instrument panel, I wish I could find these someplace

and heater controls, I am plugging and unplugging the fan to work my heater.

It should not cost too much to do this. - Ted

67cst · 03-02-2003, 04:44 PM

get the truck on the road in the next 2-3 months

Fred T · 03-02-2003, 04:54 PM

Upgraded my HEI two weeks ago, am prepping Performer intake and cast rocker covers today. Looking for a rebuildable seat to replace the quad cab seat, will also bet shoulder harnesses. Power steering pump rebuild and rebuild the AC before summer. Hopefully this fall will allow me to start the frame-off on my 52.

DanoDMano · 03-02-2003, 05:26 PM

New Leather bucket seats (heated). Center console with floor shift auto. Front disc brakes, and many engine Mods!!!

matt_field · 03-02-2003, 05:38 PM

get tranny in, np-205 in and my 383 stroker but spring

70c10 · 03-02-2003, 05:42 PM

I'm planning on installing the valve springs I bought from you and new rocker arms, upgrade my ignition stuff, upgrade my carb, paint the inside of my bed, and address my audio system.

Dandeluxe · 03-02-2003, 07:57 PM

1. paint and install my new cowl ind. hood (goodmark)

2.paint and install my rust free doors

3.install my tilt wheel column & new steering wheel

4.install my new tach dash with new circuit board

5.install a new wiring harness

6.sand and buff paint job and polish all my chrome

7. detail interior and exterior

8.detail motor and firewall

:p

Steven Sellers · 03-02-2003, 08:09 PM

Try to figure out where to start

NSANE68!!! · 03-02-2003, 08:11 PM

Just 1 thing left. GET IT DONE!!!! I have purchased all the finishing parts, just need some TIME!!!

Steven Sellers · 03-02-2003, 08:30 PM

Hmmm my avatar is kinda little

Low68 · 03-02-2003, 09:55 PM

1) Paint
2) fixing all the little quircks that go with replacing everything with aftermarket crap.
3) lower the back more and c-notch? Dad probably won't go for that one.
4) Fix the annoying little whistle that I have while driving. This should actually be first, but whatever.
5) Finish interior upolstrey.
6) power locks on tonneau cover
7) Hood lock of some kind.
8) Get a job so I can do all this.

Enough, I am started to druel on my computer again. shoot.
Low68

03-02-2003, 01:59 PM	#1
mikep Used to have a truck Join Date: May 2002 Location: port orchard WA Posts: 1,552	What are your plans for your truck this year? I recently picked up a gas mileage truck so I can get really stupid with the 68 as far as engine mods go. I have a few things I'd like to get accomplished this year . Mine are in their proper order ... 1. New heads. I'm looking at the pro action 200 cc lightning heads with 64 cc chambers to give me 11:1 compression with my domed pistons. 2. 4.30 to 4.88 gears. Havent decided which yet . 3. 4 Wheel disks . The old drums work great but I figure I can get 4 wheel disks done for $500 or so which is budget. What are your plans this year ? __________________ No truck :-(

03-02-2003, 02:07 PM	#2
miket Registered User Join Date: Jan 2003 Location: Seattle WA Posts: 1,466	New turbo 400 in a week... New rear end gears and posi...3.08/2.73 New ZZ502 New 3" exhuast and flowmasters... New Tach Dash... New Bedliner and cover... New Paint... (get rid of ugly fuel doors and tanks) Maybe a 4/6 drop... Mikep, wanna help? __________________ FocuzTech Performance Evergreen Protective Coatings Gatorhyde...the best kept secret in spray in bed lining & protection

03-02-2003, 02:40 PM	#4
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,306	By the Fall I hope to have the money for a new paint job and engine rebuild...she's fine now, but she'll be due by Fall. __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 20 Yrs - 1 of 208 Built & Sold In Canada! - 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 2 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 15 Yrs - 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 13 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 6 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

03-02-2003, 02:52 PM	#6
lukecp Formerly yellow72custom Join Date: May 2001 Location: Austin, TX Posts: 7,531	Mine should be all performance upgrades, depending on how much money i make this summer. I plan to replace my stock heads with either a set of 65cc bowl-ported 2.02/1.60 GM heads, or a set of Vortec heads, add a Performer RPM intake manifold, H-pipe on my exhaust, stage 2 shift kit to the tranny, and possibly a Comp XE262 cam, and fix all the oil leaks while i have my motor apart. Then the truck should be running deep into the 14 second range, which would give me bragging rights over some fox-body mustangs, 3rd gen Camaros, and most rice burners . __________________ '72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg

03-02-2003, 02:58 PM	#7
Lowerd1 Full Time Loser! Join Date: Feb 2003 Location: Murfreesboro Tennessee Posts: 65	1.Buy one this week 2.Fix the rusted out Rocker Panels 3.Raise the front back up since somebody lowered it. 4.Finish the wireing. 5.Put my subs and Amp in. 6.RhinoLiner the Bed, 7.Stock Wheels back on it. Thats about it. __________________ 1979 C10 - Its being rebuilt. 1978 Silverado - Its being driven. 1995 Grand Prix GTP - Its stock

03-02-2003, 02:16 PM	#3
Locutus Registered User Join Date: Jan 2003 Location: Santa Fe, Texas Posts: 250	Replace cab custom stereo install with 2 12" subs TPI Fuel injection w/ Holly commander 950 contol module and ported intake,plenum and siamesed runners. Paint Ball joints, front springs and power steering(have pump and steering box need to find bracket) Possible Manual 6 speed conversion or 700r4 ???Maybe convert short bed to long bed??? any done that conversion yet? A/C conversion(stock or aftermark) Mainly I want to get this up to being a nice daily driver that I won't be ashamed to have parked out front but that I wouldn't be afraid to haul around parts or my race car.

03-02-2003, 02:44 PM	#5
GMC71k20 Registered User Join Date: Aug 2002 Location: mass Posts: 1,277	the GMC is at the bodyshop right now, should get it back in mid-late april with new hugger orange paint and new grill gonna swithc the 4" inch lift out with a 6" skyjacker lift and then im gonna drive the hell out of it.

03-02-2003, 03:18 PM	#9
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Well? I'm instaling a new Optima battery right now(waiting for paint to dry). Then later this evening its going to the body shop. Cargo light Removing front and rear glass. (Checking out front and puttting in different rear slider) Gonna paint the frame and axles Sand and buff fenders and doors New Carpet Upgrade stereo Aftermarket gauges Maybe a new front bumper if I get that far. Etc..........

03-02-2003, 03:28 PM	#10
imaindianoutlaw GMC SHORT FLEET F/S Join Date: Jun 2000 Location: SOUTH WILLIAMSPORT PENNSYLVANNIA Posts: 2,117	well first I need to get the passenger rocker replaced and the cab mounts redone. Get a new mirror and get the heater working with new defrost ducks! Then its time for Mickey Thompson classic II's 16/8 and 16/10 and bfgs hopefully before winter! Going on a cruise and need to save money! Attached Images __________________ CHARLES WADE HEIN HVACR FOREMAN. LEWISBURG U.S.P.

03-02-2003, 03:49 PM	#11
Purs Got Big Block? Join Date: Apr 2000 Location: West Texas Posts: 1,510	paint it and sell it (or trade...) then find me a 72 Jimmy or a Blazer! __________________ "Experience is what you get when you didn't get what you wanted."

03-02-2003, 03:55 PM	#12
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,754	Mostly....Assembled... I hope to have most of the body work and interrior up grades done. New 275/60 tires. If I'm lucky and the funds are there...maybe even paint. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

03-02-2003, 04:03 PM	#13
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	For sure install new engine. Maybe install front disk cross member. If I install the crossmember, I will install the 72 rear end I have, and power brakes. Wash it. LOL

03-02-2003, 04:33 PM	#14
weasel29gm SLOW BUT SURE,BUT CLOSER Join Date: Feb 2002 Location: eleanor wv usa Posts: 3,091	Hopefully finish the body and paint, install the fresh .040 350 and 350 Turbo. Get the little stuff I need and have on the road by May or June. __________________ 69 C-10, OWNED 35YRS... 350 over 30, 350 Turbo, 3:73 Posi P/S, P/B Black with red and black int. ''LOVE THESE OLD ''TRUCKS.......

03-02-2003, 04:41 PM	#15
The Terminator Registered User Join Date: Feb 2003 Location: Dallas, GA 35 miles northwest of the armpit Posts: 51	I would like to paint the bed, and finish the interior. The interior needs: Sound deadener and carpet, door panels a new dash interior a dash pad lights in the instrument panel, I wish I could find these someplace and heater controls, I am plugging and unplugging the fan to work my heater. It should not cost too much to do this. - Ted __________________ The Terminator John 3:16 1968 C10 SWB Stepside

03-02-2003, 04:44 PM	#16
67cst i love summertime Join Date: Jul 2002 Location: Kelowna BC Posts: 4,303	get the truck on the road in the next 2-3 months __________________ 1967 shortbox stepside Chevy, 365 hp 327, th400. GLOVE BOX LIGHTS FORSALE, click link for info http://67-72chevytrucks.com/vboard/s...d.php?t=273724



Register or Log In To remove these advertisements.

03-02-2003, 04:54 PM	#17
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	Upgraded my HEI two weeks ago, am prepping Performer intake and cast rocker covers today. Looking for a rebuildable seat to replace the quad cab seat, will also bet shoulder harnesses. Power steering pump rebuild and rebuild the AC before summer. Hopefully this fall will allow me to start the frame-off on my 52. __________________ Fred There is no such thing as too much cam...just not enough engine.

03-02-2003, 05:26 PM	#18
DanoDMano Pronounced "Pew-al-up" Join Date: Oct 2002 Location: Puyallup, Washington Posts: 845	New Leather bucket seats (heated). Center console with floor shift auto. Front disc brakes, and many engine Mods!!! __________________ Classic GM Trucks of Washington Club Member 1970 FS chevy,350/350, Edelbrock cam and intake. Holley 650 carb,HEI,AT,Tangier Orange, 18's, Power Locks, Truck Photos

03-02-2003, 05:38 PM	#19
matt_field Registered User Join Date: Apr 2001 Location: Detroit Lakes, Minnesota Posts: 885	get tranny in, np-205 in and my 383 stroker but spring __________________ 1971 k5 blazer 80k mike survivor 1972 3/4 ton 4wd Cummins 12v 1967 swb 2wd 427bbc 1968 4wd shortbox 1971 Cheyenne swb k10 unrestored 1971 Cheyenne super 40k 402bb survivor 1967 Chevy k10 (first truck) 1968 L78 camaro survivor 18k miles 1969 z28 survivor 60k miles 1969 z28 survivor 39k miles 1969 z28 rs survivor 80k miles

03-02-2003, 05:42 PM	#20
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	I'm planning on installing the valve springs I bought from you and new rocker arms, upgrade my ignition stuff, upgrade my carb, paint the inside of my bed, and address my audio system. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

03-02-2003, 07:57 PM	#21
Dandeluxe Senior Member Join Date: Nov 2001 Location: st.louis mo. Posts: 717	projects for truck this spring 1. paint and install my new cowl ind. hood (goodmark) 2.paint and install my rust free doors 3.install my tilt wheel column & new steering wheel 4.install my new tach dash with new circuit board 5.install a new wiring harness 6.sand and buff paint job and polish all my chrome 7. detail interior and exterior 8.detail motor and firewall :p __________________ 1969 cst swb 350/400 th . DANNY C . ["]FRIENDS DONT LET FRIENDS DRIVE F@RD$!! 1969 cst swb corvette hugger orange with 400 hp sbc I started out with nothing and i held on to it

03-02-2003, 08:09 PM	#22
Steven Sellers Registered User Join Date: Jan 2002 Location: North Carolina Posts: 692	Try to figure out where to start __________________ 2008 Buick Enclave(wifes new non wrecked) 1996 Jeep Cherokee 2002 2500HD 6.0L (traded) 1998 Jeep Grand Cherokee(wifes/wrecked) 1977 DJ5 postal jeep(mmm lots of fun) 1988 Toyota 2wd p/u(DD, blewup 199,000) 1991 Toyota 2ed p/u (sry just cant break these things) 1997 XR70 Honda 1991 Z50(FOR SALE) 1972 Z50 Honda 1970 SWB 350/knucklebuster "The adventure begins and I am confident that there will be no end".

03-02-2003, 08:11 PM	#23
NSANE68!!! SLICER AND DICIER Join Date: May 2001 Location: Quuen Creek Posts: 1,383	Just 1 thing left. GET IT DONE!!!! I have purchased all the finishing parts, just need some TIME!!! __________________ 01 Tahoe 22's 2/4 drop and tv's 68 chevy money pit 51 chevy belair 95 Honda 900RR 05 GMC Siearra (company truck)

03-02-2003, 08:30 PM	#24
Steven Sellers Registered User Join Date: Jan 2002 Location: North Carolina Posts: 692	Hmmm my avatar is kinda little __________________ 2008 Buick Enclave(wifes new non wrecked) 1996 Jeep Cherokee 2002 2500HD 6.0L (traded) 1998 Jeep Grand Cherokee(wifes/wrecked) 1977 DJ5 postal jeep(mmm lots of fun) 1988 Toyota 2wd p/u(DD, blewup 199,000) 1991 Toyota 2ed p/u (sry just cant break these things) 1997 XR70 Honda 1991 Z50(FOR SALE) 1972 Z50 Honda 1970 SWB 350/knucklebuster "The adventure begins and I am confident that there will be no end".

03-02-2003, 09:55 PM	#25
Low68 Registered User Join Date: May 2001 Location: Arizona Posts: 758	1) Paint 2) fixing all the little quircks that go with replacing everything with aftermarket crap. 3) lower the back more and c-notch? Dad probably won't go for that one. 4) Fix the annoying little whistle that I have while driving. This should actually be first, but whatever. 5) Finish interior upolstrey. 6) power locks on tonneau cover 7) Hood lock of some kind. 8) Get a job so I can do all this. Enough, I am started to druel on my computer again. shoot. Low68 __________________ Build Thread

Register or Log In To remove these advertisements.