KS Restored Jack, Handle, and Lug Wrench - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**RogerKoop** · 03-10-2013, 11:49 AM

I have for sale a restored 1/2 jack and handles which have been bead blasted and painted. The Jack has been partially disassembled, cleaned and lubricated.

In it's closed position it is 7" tall. Fully extended it measures 16".

I do have several sets done. Price is $120.00 including shipping.

I accept Checks, MO's and PayPal.

sasquatch58 · 03-18-2013, 08:42 PM

will you take 100.00 shipped for the set in the pic

**jocko** · 03-18-2013, 10:32 PM

Roger, I will take one complete set as shown for $115. Sorry, I don't still have the PM you sent with you address from when I bought the aux batt harness and cruise brackets a little while ago. Can you pls re-pm me with your address so I know where to send the MO? Thanks!

Also - I'll probably get the MO tomorrow - was wondering if you had any of the associated floorboard jack retention hardware you'd consider parting with? If yes, pls let me know what you have and how much you want for it - I might be interested in that also. If not, no worries, will take just one set of the stuff shown above for $115.

Take care and thanks for doing such a great job on this stuff - you seem to sell everything I need... Wish you lived next door!

**RogerKoop** · 03-19-2013, 08:03 AM

Quote:

Originally Posted by jocko

Roger, I will take one complete set as shown for $115. Sorry, I don't still have the PM you sent with you address from when I bought the aux batt harness and cruise brackets a little while ago. Can you pls re-pm me with your address so I know where to send the MO? Thanks!

Also - I'll probably get the MO tomorrow - was wondering if you had any of the associated floorboard jack retention hardware you'd consider parting with? If yes, pls let me know what you have and how much you want for it - I might be interested in that also. If not, no worries, will take just one set of the stuff shown above for $115.

Take care and thanks for doing such a great job on this stuff - you seem to sell everything I need... Wish you lived next door!

I think I may have the mounting hardware for a pickup. I'll check tonight.

Thanks Roger Koop

**jocko** · 03-19-2013, 10:01 PM

thanks roger - payment sent.

sasquatch58 · 03-19-2013, 10:29 PM

ill take a set send me paypal info.thanks

Darren MagooGardner · 03-20-2013, 12:29 AM

I am lookng for a lug wrench..do you happen to have one?

**RogerKoop** · 03-20-2013, 09:50 AM

One jack and handles sold to jocko.

**RogerKoop** · 03-20-2013, 10:23 AM

Quote:

Originally Posted by Darren MagooGardner

I am lookng for a lug wrench..do you happen to have one?

I'll check to see if I have a spare.
Roger

**jocko** · 03-25-2013, 08:59 PM

got the jack today Roger, thanks very much!

**70cst** · 03-25-2013, 09:16 PM

Great looking and fair price

**RogerKoop** · 03-26-2013, 03:18 PM

I have 2 sets left if anyone is interested

68panelman · 03-26-2013, 04:25 PM

Would these be correct for a '70 Blazer also?

**RogerKoop** · 03-27-2013, 10:09 AM

Quote:

Originally Posted by 68panelman

Would these be correct for a '70 Blazer also?

The jacks are the same for pickup and blazers. I checked the GM parts manual to obtain this information. See attached parts manual section on Jacks

JimH2828 · 03-27-2013, 10:48 AM

Roger, I'll take a set, send me your email and I'll send you a PayPal payment of $115 right away.

Critterman71 · 03-27-2013, 09:19 PM

I need a lug wrench for a 3/4 ton do you have one?

**RogerKoop** · 03-28-2013, 09:56 PM

Quote:

Originally Posted by Critterman71

I need a lug wrench for a 3/4 ton do you have one?

I don't have a spar lug wrench at this time. But I will keep looking.

Roger

Critterman71 · 03-28-2013, 10:17 PM

Thanks again Roger let me know if you get one I will take it.

srea76 · 03-28-2013, 11:26 PM

Having moutning hardware too?

**RogerKoop** · 03-29-2013, 07:47 AM

Quote:

Originally Posted by srea76

Having moutning hardware too?

No mounting hardware at this time.

**yote1234** · 03-29-2013, 10:03 AM

need jack only... do you want to sell one seperatly?

**RogerKoop** · 04-03-2013, 11:34 AM

Quote:

Originally Posted by yote1234

need jack only... do you want to sell one seperatly?

I have a lead on some Jacks. I'll know something in 2 weeks.

**hooverfish** · 04-03-2013, 05:58 PM

Roger,
would you have a folding jack handle that you would sell separately? If so, let me know how much with shipping included and I may take it.

I have a long one-piece jack handle (about 5 feet long) that came with my 72C10, but have no idea what type truck it came in. It looks exactly like your jack handle at both ends but it does not 'fold' in half. Maybe you or someone else can tell me what is the correct application for this piece?
Thanks !

**RogerKoop** · 04-04-2013, 08:30 AM

Quote:

Originally Posted by hooverfish

Roger,
would you have a folding jack handle that you would sell separately? If so, let me know how much with shipping included and I may take it.

I have a long one-piece jack handle (about 5 feet long) that came with my 72C10, but have no idea what type truck it came in. It looks exactly like your jack handle at both ends but it does not 'fold' in half. Maybe you or someone else can tell me what is the correct application for this piece?
Thanks !

What you have is a 1967-1968 jack handle. If you look at the floor in these years you will see where the handle fits. It is contoured to fit the jack handle. I normally don't split them up, but I will sell you one for $45.00 shipped. Let me know.

Roger Koop

**RogerKoop** · 04-04-2013, 08:40 AM

Quote:

Originally Posted by yote1234

need jack only... do you want to sell one seperatly?

I've got a jack if you are still interested. $65.00 shipped.

03-10-2013, 11:49 AM	#1
RogerKoop Senior Member Join Date: Nov 2012 Location: Shawnee, KS Posts: 1,807	Restored Jack, Handle, and Lug Wrench I have for sale a restored 1/2 jack and handles which have been bead blasted and painted. The Jack has been partially disassembled, cleaned and lubricated. In it's closed position it is 7" tall. Fully extended it measures 16". I do have several sets done. Price is $120.00 including shipping. I accept Checks, MO's and PayPal. Attached Images __________________ Roger Koop Last edited by RogerKoop; 03-19-2019 at 11:30 PM. Reason: update

03-18-2013, 08:42 PM	#2
sasquatch58 Registered User Join Date: Aug 2012 Location: bowie maryland Posts: 165	Re: Restored Jack, Handle, and Lug Wrench will you take 100.00 shipped for the set in the pic

03-18-2013, 10:32 PM	#3
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,937	Re: Restored Jack, Handle, and Lug Wrench Roger, I will take one complete set as shown for $115. Sorry, I don't still have the PM you sent with you address from when I bought the aux batt harness and cruise brackets a little while ago. Can you pls re-pm me with your address so I know where to send the MO? Thanks! Also - I'll probably get the MO tomorrow - was wondering if you had any of the associated floorboard jack retention hardware you'd consider parting with? If yes, pls let me know what you have and how much you want for it - I might be interested in that also. If not, no worries, will take just one set of the stuff shown above for $115. Take care and thanks for doing such a great job on this stuff - you seem to sell everything I need... Wish you lived next door!

03-19-2013, 10:01 PM	#5
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,937	Re: Restored Jack, Handle, and Lug Wrench thanks roger - payment sent.

03-19-2013, 10:29 PM	#6
sasquatch58 Registered User Join Date: Aug 2012 Location: bowie maryland Posts: 165	Re: Restored Jack, Handle, and Lug Wrench ill take a set send me paypal info.thanks

03-20-2013, 12:29 AM	#7
Darren MagooGardner Registered User Join Date: May 2012 Location: minden la Posts: 704	Re: Restored Jack, Handle, and Lug Wrench I am lookng for a lug wrench..do you happen to have one?

03-20-2013, 09:50 AM	#8
RogerKoop Senior Member Join Date: Nov 2012 Location: Shawnee, KS Posts: 1,807	Re: Restored Jack, Handle, and Lug Wrench One jack and handles sold to jocko. __________________ Roger Koop

03-25-2013, 08:59 PM	#10
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,937	Re: Restored Jack, Handle, and Lug Wrench got the jack today Roger, thanks very much!

03-25-2013, 09:16 PM	#11
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	Re: Restored Jack, Handle, and Lug Wrench Great looking and fair price __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

03-26-2013, 03:18 PM	#12
RogerKoop Senior Member Join Date: Nov 2012 Location: Shawnee, KS Posts: 1,807	Re: Restored Jack, Handle, and Lug Wrench I have 2 sets left if anyone is interested __________________ Roger Koop

03-26-2013, 04:25 PM	#13
68panelman Registered User Join Date: Jan 2011 Location: Delaware and Long Island, New York Posts: 3,455	Re: Restored Jack, Handle, and Lug Wrench Would these be correct for a '70 Blazer also?

03-27-2013, 10:48 AM	#15
JimH2828 Registered User Join Date: Oct 2012 Location: Cumming GA Posts: 613	Re: Restored Jack, Handle, and Lug Wrench Roger, I'll take a set, send me your email and I'll send you a PayPal payment of $115 right away.

03-27-2013, 09:19 PM	#16
Critterman71 Registered User Join Date: Nov 2008 Location: Lansing Mi Posts: 642	Re: Restored Jack, Handle, and Lug Wrench I need a lug wrench for a 3/4 ton do you have one?

03-28-2013, 10:17 PM	#18
Critterman71 Registered User Join Date: Nov 2008 Location: Lansing Mi Posts: 642	Re: Restored Jack, Handle, and Lug Wrench Thanks again Roger let me know if you get one I will take it.

03-28-2013, 11:26 PM	#19
srea76 Registered User Join Date: Nov 2009 Location: Hazlehurst, Ga. Posts: 822	Re: Restored Jack, Handle, and Lug Wrench Having moutning hardware too? __________________ 1972 Custom Deluxe LT1 Gen V Swap "Green Lantern" 1984 Silverado Red Baron-72 c10 Project



Register or Log In To remove these advertisements.

03-29-2013, 10:03 AM	#21
yote1234 Senior Member Join Date: Feb 2003 Location: Gold Canyon Arizona Posts: 4,280	Re: Restored Jack, Handle, and Lug Wrench need jack only... do you want to sell one seperatly? __________________ 1971 K5 CST Blazer 1965 Chevelle Malibu 283 (sadly sold) 1968 Camaro 327 1968 Honda mini-trail z50a #377 1966 uh 1-D Huey

04-03-2013, 05:58 PM	#23
hooverfish Senior Member Join Date: Oct 2012 Location: Lexington, Ky Posts: 2,121	Re: Restored Jack, Handle, and Lug Wrench Roger, would you have a folding jack handle that you would sell separately? If so, let me know how much with shipping included and I may take it. I have a long one-piece jack handle (about 5 feet long) that came with my 72C10, but have no idea what type truck it came in. It looks exactly like your jack handle at both ends but it does not 'fold' in half. Maybe you or someone else can tell me what is the correct application for this piece? Thanks ! __________________ Larry 84 Chevy SWB, "Roy", dark blue orig paint, 6 cyl auto, PS, 88,000 miles. 72 Highlander LWB "Olive" med olive over lt yellow, air, 77,000 miles (sold) "It's a sorry man who can't find his wife a good job" Last edited by hooverfish; 04-03-2013 at 11:28 PM.

Register or Log In To remove these advertisements.